power adapter port (optional) 29. secondary network port (optional) 30. security cable slot 31. network port 32. USB 2.0 port 33. serial port 34. VGA port 35. power adapter port 36. radio frequency pass-through connectors 37. docking device connector CAUTION: EXPLOSION HAZARD—External connections (power adapter port, HDMI port, USB
Reconstruction of Sewer Shaft Pro les from Fisheye-Lens Camera Images Sandro Esquivel 1, Reinhard Koch , and Heino Rehse2 1 Christian-Albrechts-University, Kiel, Germany 2 IBAK Helmut Hunger GmbH & Co. KG, Kiel, Germany Abstract.
e-mail: [email protected] 2 California Institute of Technology, Pasadena, CA 91125 3 Institut für Experimentelle und Angewandte Physik, Christian-Albrechts-Universität zu Kiel, Kiel, Germany 4 Space Research Group, Universidad de Alcalá, Alcalá de Henares, Spai
Cross reference guide: B&G, Taco and Armstrong to Grundfos Grundfos Model TP Hp Port to port length Flange size B & G Series 60 & 80 Hp Port to port length Flange size Taco Series 1600 Hp Port to port length Flange Size Armstrong Series H Hp Port to port lengt
† The POS link bundling feature is supported on the following shared port adaptors(SPA): – 2-port OC-48 POS/SDH SPA – 4-port OC-48 POS/SDH SPA – 1-port OC-192 POS/XFP SPA – 4-port OC-3 POS-V2 SPA – 8-port OC-3 POS/SDH SPA – 8-port OC-12 POS/SDH SPA Note For more information a
64c POS/RPR Shared Port Adapter (Cisco 1-Port OC-192 POS/RPR SPA; refer to Figure 1). Figure 1. Cisco 1-Port OC-192 POS/RPR SPAs with XFP, VSR, and LR Optics Product Overview The Cisco 1-Port OC-192 POS/RPR SPA is available on high-end Cisco routing platforms, offering the benefits of networ
• The switch login uses both port security binding and fabric binding for a given VSAN. • Binding checks are performed on the port VSAN as follows: – E port security binding check on port VSAN – TE port security binding check on each allowed VSAN While port security complements fab
• The switch login uses both port security binding and fabric binding for a given VSAN. • Binding checks are performed on the port VSAN as follows: – E port security binding check on port VSAN – TE port security binding check on each allowed VSAN While port security complements fab
E. Ethernet Port – Used to connect PDU to the network. F. ENVIROSENSOR/ Daisy Chain (In) Port (RJ45 modular port) – Used for ENVIROSENSOR or chaining to previous PDU. G. USB Port - Used to upgrade the firmware via a flash drive. H. Serial Port (RJ45 modular port) - Used to connect
M16 Cartridge Thread 7/8 in. Valve Hex Size 20 - 25 lbf ft Valve Installation Torque 2-Port 2-Port (Deep) 3-Port T-8A T-8DP T-9A Series 0 Cartridges M16 Cartridge Thread 3/4 in. Valve Hex Size 1.00 in. Valve Hex Size 20 - 25 lbf ft Valve Installation Torque 2-Port 2-Port (Deep) 3-Port T-162A T-162DP T-16
USB Port: Adheres to USB specification 1.1. Device only using Type B connection. Serial Ports: Format and Baud Rates for each port are individually software programmable up to 115,200 baud. PGM Port: RS232 port via RJ12. COMMS Ports: RS422/485 port via RJ45, and RS232 port via RJ12. DH485
4 Setting Up Port Forwarding and Port Triggering on RV0xx Series Routers Application Note Setting Up Port Forwarding and Port Triggering To open this page: Using
Port Utilization Guide for Cisco Unified Contact Center Express Solutions, Release 11.0(1) 7 Port Utilization in Unified CCX Unified IP IVR Port Utilization. Traffic Purpose direction Remote Protocol and Port Remote Device (Process or Application Protocol) Listener Protocol and Port Listener (Process or
64c POS/RPR Shared Port Adapter (Cisco 1-Port OC-192 POS/RPR SPA; refer to Figure 1). Figure 1. Cisco 1-Port OC-192 POS/RPR SPAs with XFP, VSR, and LR Optics Product Overview The Cisco 1-Port OC-192 POS/RPR SPA is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and easy upgrades.
Power port. The 5V DC / 2A power port is used to connect the Transmitter to a power source. HDMI Input ort. The p HDMI Input port is used, via an HDMI cable, to connect the Transmitter to an HDMI source (set top box, Blu- ray player, gaming console, etc.). HDMI Out to TV port.The HDMI Out to TV port (a pass-through port) is used, via an HDMI cable, to connect the Transmitter to a local HDTV to ...
The Room Alert 4E ID Box . Front Power Port . Back Reset Button Custom Light Tower/ Relay . Port Power Port . Ethernet Port . Digital Ports (2) Switch Sensor . Port (1) Front A standard power port connects Room Alert 4E to an electrical outlet with AVTECH's International Power Adapter. 4 AVTECH Software, Inc.
C9600-LC-40YL4CD - Cisco Catalyst 9600 Series 40-port 50/25/10GE, 2-port 200GE, 2-port 400GE Line Card Figure 2. Cisco Catalyst 9600 Series 40-port 50GE, 2-port 200GE, 2-port 400GE Line (C9600-LC-40YL4CD) Highlights of the C9600-LC-40YL4CD Paired with C9600X-SUP-2 (3.2 Tbps bandwidth), this line card provides up to 40 ports of 50/25/10 GE,
14 Cisco RV320/RV325 Administration Guide 3 Configuration (Wizard) To access the Internet connection setup wizard and be prompted through the process, click Setup Wizard to launch the Wizard. Port Activity Port Activity identifies the port interfaces and indicates the status of each port: • Port ID—Port label.
They apply equally to all Port users, all activities undertaken, contractors, clients, all businesses operating on or in the Port, all visitors and the general public entering the Port area, including Port controlled/administered land and facilities. PORTS NORTH PORT NOTICES Being Notices displayed or published by Ports North for the
the other end to the POS or PC, as appropriate (see Table 2). Figure 3: iSC250 Multipoint Port . Table 2: iSC250 Multipoint Port . Icon Port Description . Multipoint port Use to connect Ethernet or USB. Use this port to connect host devices (POS or PC) dir
