Transcription

Glass SolutionsBrought to you by ASSA ABLOY

Table of ContentsDoor Rails. 7Sidelite Glazing Hardware.11Headers.16Patch Fittings.18Panic Devices.23Sliding Door Hardware.26Door Pulls.28Door Controls.32Mechanical Locking Hardware.42Electrified Hardware.53Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproductionin whole or in part without the express written permission ofASSA ABLOY Inc. is prohibited.

ASSA ABLOY GlassHardware SolutionsAs the industry leader in door security,innovation, and design, ASSA ABLOY offersa complete line of commercial hardwaresolutions for all glass entrances and partitions,including: patch fittings, door rails, slidingand folding systems, architectural pulls, andmechanical and electrified locking products.Tested in our state-of-the-art, BHMA-certifiedlab, our products meet the most rigoroustesting standards.Our Glass Solutions program offers theconvenience of placing a consolidated orderwith same day shipping and support fromdedicated technical and customer serviceexperts.

Glass Solutions Program InformationThe ASSA ABLOY Glass Solutions program offers the convenience of placing a single order, with oneshipment, from multiple ASSA ABLOY brands.Customer Service/Technical Product SupportFor Glass Solutions questions please contact us via phone or email.Call: 855-594-6989Email: [email protected] or [email protected] of OperationCustomer Service and Technical Support: 8:00 am - 4:30 pm ESTOrderingTo place an order:Fax: 844-851-8665Email: [email protected]: www.assaabloyglass.usLead TimeLead times will vary. Orders containing stock items will ship within 48 hours of order acknowledgment. Lead timesfor non-stock items will change based on complexity and quantity. Standard stock rails and headers will ship within72 hours. Products such as the glass panic device will ship within approximately 10 days. Expected ship dates will belisted on the acknowledgment.Part Number StructureOur part numbers were designed to facilitate ease of ordering and ensure all products are tied to the coordinatingjob. Each part number specifies the product family, glass thickness (if applicable), and finish.Glass Thickness Sizing CodesFinishes**Glass ThicknessSize Code/8 "A1/2"B/16"C/8 "D*/16"E*/4"F*/16"G*39511313US CodeANSI/BHMA DescriptionCode28628Clear Anodized Aluminum314n/aExtra Dark Anodized Aluminum(314E)n/aExtra Dark Anodized Equivalent32D630Satin Stainless Steel32629Bright Stainless Steel**Special finishes considered upon request*Currently not available. Product in development.4Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Glass Door Styles and HandingThere are four basic configurations of glass doors as established by the Glass Association of North America (GANA).For the available variations of each style, refer to the Glass Door Configuration section.PBPAFFull door rail topand bottomFull door rail bottomand patch fitting topPatch fitting topand bottomPatch fitting top andbottom with patch lockDoor Handing and Swing6LH5RHInterior2LHDExterior4LHRCopyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.1RHD3RHR5

SustainabilitySustainability is the natural translation of ASSA ABLOY’s Corporate Cornerstones: vision, realism,courage, and ethics. These cornerstones have been central to the Group’s development sinceits creation in 1994. The environment, business ethics, and social responsibility are criticalissues and are an integral part of our ASSA ABLOY society. Our unconditional aim is to makesustainability a central part of our business philosophy and culture; and even more importantly,to integrate sustainability into our overall business strategy.DaylightingThere are many attributes to a sustainable built environment such as daylighting. Daylighting is the process ofbringing natural light and direct sunlight into the a building through windows, skylights and interior glass. Exposureto natural light helps improve occupant health, happiness, productivity, and well-being, while decreasing totalbuilding energy costs by almost a third.GlassGlass creates openness in a space. In an office environment, openness promotes happiness, creativity, andcommunication, which are important aspects of good design. In creating a modern atmosphere, glass never looks oldor outdated. Being more durable than most materials, glass has longevity that offers an ideally cost-effective solution.Also, glass applications are easily configured, allowing flexibility in any design. At ASSA ABLOY, we believe good designis more than just tangible; good design is imperceptible.6Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Door RailsDoor RailsASSA ABLOY Door Rails offer ease of installation with dependable quality. Thesepre-assembled mechanical rails have a variety of fabrication options to create acustomized solution that fits any application.Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.7

Door RailsDoor RailsFeatures Dry glaze pre-assembled mechanical rails One-piece compression system for easy, fastinstallation Tested in a variety of simulated and real-life scenariosto ensure holding power Matching sidelite rails offered Precision, custom fabrication for compatible hardware No additional charge for non-standard lengths Locking option available on most configurations-- Lock body installed; cylinder, thumbturn, anddustproof strike ordered separately Adjustable blocking for standard hardware providesleft to right field alignment 4" tapered 10" square door rails meet ADArequirementsSpecificationsSquare 23/4" Rail Compatible PartsRail Options: (B) - bottom rail (T) - top railRail Lengths: 353/4" Standard - single door 3513/16" Standard - double door Custom lengths availableDoor Thickness:3Material: Aluminum body Bright or satin stainless steel claddingFinishes:US32D/630, US32/629, US28/628, 314Floor Closer/Pivot Insert (DRC-275)/8", 1/2", and 9/16"Top Pivot Insert (DRP-275)Door Rail StylesSquare 23/4" Rail (DRS-275)Overhead Closer Insert (DOHC-275)23/4"(70 mm)19/16"(40 mm)8Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Tapered 4" Rail (DRT-4)Door RailsSquare 4" Rail (DRS-4)4"(102 mm)4"(102 mm)17/8"(48 mm)Square 6" Rail (DRS-6)17/8"(48 mm)Square 10" Rail (DRS-10)6"(152 mm)10"(254 mm)17/8"(48 mm)17/8"(48 mm)Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.9

Door RailsDoor Rail Compatible Parts(For 4", 6" and 10" rails)Adjustable End Load Bottom Pivot (PV-ENDLOAD)Floor Closer Arm (FC-6275/6280-ARM)Walking Beam Pivot (PV-WALKBEAM)Offset Floor Closer Arm (FC-6275/6280-OFFARM)Bottom Door Rail Lock (DR-BTMLOCK)End Load Overhead Closer Arm (OHC-609-ARM)1" Cylinder (DR-LOCKCYL)Dust Proof Strike (570)Thumbturn (DR-LOCKTT)/32"(4 mm)513/8"(35 mm)10Cylinder Cam1"(25 mm)0.715"(18 mm)15/32"(29 mm)Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Sidelite Glazing HardwareSidelite Glazing HardwareSidelite Rails and U-Channels are designed to preserve the clean, modern appearanceof glass walls and sidelites. ASSA ABLOY offers an assortment of sizes in aluminum andstainless steel finishes.Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.11

Sidelite Glazing HardwareSidelite RailsSidelite Rails maintain a seamless, consistent appearance when used with matching door rails. Available in standard orcustom lengths, the dry-glaze installation is fast and efficient.Product Features Provides aesthetic continuity when used with coordinating door rails Standard pre-fit, dry-glaze, black vinyl;gray vinyl option for 1/2" glass only Roll-in gasketing alternative (black only) Variety of reversible saddles offered for fluctuating clearances and out-of-tolerance openingsSpecificationsMaterials Aluminum body Bright or satin stainless steel claddingGlass Thickness 3/8", 1/2", and 9/16"SystemComponents Cut-to-length or 12' stock lengths available 4" aluminum setting blocks includedwith bottom rails End caps sold separatelyFinishesUS32D/630, US32/629, US28/628, 314Setting BlockSidelite Rail StylesSquare 23/4" Rail (SRS-275)23/4"(70 mm)19/16"(40 mm)12Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Square 4" Rail (SRS-4)Sidelite Glazing HardwareSidelite Rail Styles (continued)Tapered 4" Rail (SRT-4)4"(102 mm)4"(102 mm)17/8"(48 mm)17/8"(48 mm)Square 10" Rail (SRS-10)Square 6" Rail (SRS-6)6"(152 mm)10"(254 mm)17/8"(48 mm)17/8"(48 mm)Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.13

Sidelite Glazing HardwareSaddlesSAS-1500x125SAR-1500x188/375 3/16" and 3/8" H x 11/2" W 1/8" H x 11/2" W(3 mm H x 38 mm W) Non-reversible23/4" (70 mm) rail only(5 mm and 10 mm H x 38 mm W) Reversible23/4" (70 mm) rail onlySAS-1875x125SAR-1875x188/375 1/8" H x 17/8" W(3 mm H x 48 mm W) Non-reversible SAR-1500x500/625SAR-1500x250/750 1/2" and 5/8" H x 11/2" W 1/4" and 3/4" H x 1½" W/16" and 3/8" H x 17/8" W3(5 mm and 10 mm H x 48 mm W) Reversible(13 mm and 16 mm H x 38 mm W)(6 mm and 19 mm H x 38 mm W) Reversible23/4" (70 mm) rail only Reversible23/4" (70 mm) rail onlySAR-1875x500/625SAR-1875x250/750 1/2" and 5/8" H x 17/8" W 1/4" and 3/4" H x 2" W(13 mm and 16 mm H x 48 mm W)(6 mm and 19 mm H x 51 mm W) Reversible N-BGD-WEDGE-BPre-fit 1/2" glassPre-fit 3/8" glassRoll-in for 1/2" glassWedge for 1/2" glass(not offered on Sidelite Rails)*Gasketing options apply to both Sidelite Rails and U-Channels.14Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Sidelite Glazing HardwareU-ChannelsU-channels secure glass into position and create a continuous, minimal profile that allows the maximum amount ofnatural light to enter the room.Product Features Easy and efficient to install Lengths:-- 12' stock or custom-- Annodized: 90" maximum-- Hat Channel: 10' white powder coat only Standard pre-fit, dry-glaze, black vinyl;gray vinyl option for 1/2" glass only Wet/dry glaze channel (gasketing not standard)-- Wedge gasket available-- Can be used with silicone-- End caps sold separatelySpecificationsMaterials Aluminum body Bright or satin stainless steel claddingGlass Thickness3FinishesUS32D/630, US32/629, US28/628, 314/8", 1/2", and 9/16"U-Channel StylesDry U-ChannelsUCD-0687x1625Wet/Dry U-ChannelsUWD-1000x1000UWD-HAT-1750x10001"(25 mm)1"(25 mm)1"(25 mm)/16"(18 mm)1113/4"(45 mm)15/8"(41 mm)UCD-1625x1625UWD-1500x10001"(25 mm)25/16"(59 mm)11/2"(38 mm)1 /8 "(41 mm)515/8"(41 mm)UCD-1625x1875UWD-2000x10001"(25 mm)2"(51 mm)15/8"(41 mm)17/8"(48 mm)Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.15

HeadersHeadersASSA ABLOY’s state-of-the-art equipment and skilled, in-house engineering services, quicklyand effectively produce intricate header configurations to support any glass door solution.16Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

HeadersHeadersHeaders conceal hardware for glass door systems. They house a range of products such as closers, strikes, mag locks,and pivots. Our Glass Solutions program offers a collection of solid, floating, and two-piece header systems for doorsand sidelites.Product Features Two-piece, snap-fit headers for standard hardwareapplications-- No exposed fasteners provide easy access whilemaintaining clean aesthetics Solid tube headers fabricated for complex hardwareapplications Floating headers available All hardware mounting brackets and clips comepre-installed All headers prepped by machining centers Vinyl gasketing for all sidelite applications No additional charge for non-standard lengthsFinishes US32D/630, US32/629, US28/628, 314Header TypesOverhead Closer HeaderPivot HeaderPivot, Overhead Closer andSidelite HeadersSolid HeadersHDS-1750x40004"(102 mm)HDS-1750x4500HDR-1750x40004 /2 "(114 mm)12"(51 mm)4"(102 mm)13/4"(45 mm)13/4"(45 mm)HDS-2000x2000Sidelite HeaderHDR-1750x450041/2"(114 mm)13/4"(45 mm)13/4"(45 mm)HDS-2000x60006"(152 mm)2"(51 mm)Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.2"(51 mm)17

Patch FittingsPatch FittingsASSA ABLOY provides patch fittings for doors, sidelites, and transoms, offering designersand architects a complete selection of products for most frameless glass configurations.18Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

With a maximum door weight of 300 lbs., our patch fitting design is manufactured to meet the industry standard anddeliver the ultimate in strength and reliability.Product FeaturesSpecifications Manufactured for industry standard dimensions-- Standard glass prep-- 23/4" pivot centerline Snap-on cover Bottom patch lock available-- 5-Pin cylinder, 1" length Used with monolithic or laminated glass Synthetic gasketing provides ultimate durabilityMaximum DoorWeight:300 lbs. (42" maximum door width)Door Thickness:3Material: Stainless steel inserts Aluminum body Aluminum or stainless steel coverFinishes:US32D/630, US32/629, US28/628, 314/8" to 9/16"Door Patch FittingsBottom Patch (PFD-10)Top Patch (PFD-20) Floor Closer/Pivot Insert (included) (PFD-10INS) Functions with 6275/6280 Tapered Floor Closer Spindle Top Pivot Insert (included) (PFD-20PIVINS)6 /16"(163 mm)767/16"(163 mm)11/4"(32 mm)11/4"(32 mm)2"(51 mm)2"(51 mm)PFD-10INSPFD-20PIVINSCompatible PartsCompatible PartsSurface Mount Pivot(PF-SM-PIVOT)Floor Mount Pivot (PF-FM-PIVOT)Adjustable Pivot (PF-ADJ-PIV)Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.Walking Beam Pivot(PV-WALKBEAM)19Patch FittingsPatch Fittings

Patch FittingsDoor Patch Fittings (continued)Top Patch (PFD-22) Overhead Closer Insert (included) (PFD-22OHCINS)Patch Lock (PFD-100) Round Bolt Dead Bolt Lock Available with 1" cylinder and thumbturn11/4"(32 mm)67/16"(163 mm)11/4"(32 mm)61/8"(155 mm)2"(51 mm)25/8"(67 mm)11/4"(32 mm)61/8"(155 mm)25/8"(67 mm)Compatible PartPFD-22OHCINCDust Proof Strike (570)Transom Patch Fittings Pivot Insert (included) (PFT-34/40/41-PIVINS) Compatible Parts: PFD-20BCTransom Patch with Wall Bracket (PFT-34)Sidelite Transom Patch (PFT-40)85/8"(219 mm)6 /16"(163 mm)72 /16"(52 mm)117/16"(36 mm)43/16"(106 mm)23 /8 "(60 mm)Optional Inserts21/16"(52 mm)21/16"(52 mm)Pivot Insert(PFT-34/40/41-PIVINS)Sidelite Transom Fin Patch (PFT-41)(Handed)43/16"(106 mm)Blank Insert(PFT-34/40/41-BLANKINS)Stop Insert(PFT-34/40/41-STOPINS)43/16"(106 mm)21/16"(52 mm)85/8"(219 mm)20Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Sidelite Transom Patch (PFT-60) Included: Stop Insert (PFT-60/70-STOPTAB)Blank Insert (PFT-60/70-BLANKTAB)Patch FittingsTransom Patch Fittings (continued)Sidelite Transom Fin Patch (PFT-61) (Handed) Included: Stop Insert (PFT-60/70-STOPTAB)Blank Insert (PFT-60/70-BLANKTAB)43/16"(106 mm)43/16"(106 mm)21/16"(52 mm)21/16"(52 mm)43/16"(106 mm)43/16"(106 mm)RIGHT HANDSHOWN21/16"(52 mm)21/16"(52 mm)Sidelite Transom Stop Patch (PFT-62)Transom Stop Patch (PFT-70) Included: Stop Insert (PFT-60/70-STOPTAB)Blank Insert (PFT-60/70-BLANKTAB)43/16"(106 mm)21/16"(52 mm)43/16"(106 mm)43/16"(106 mm)21/16"(52 mm)21/16"(52 mm)Transom Connector Fin Patch (PFT-71)43/16"(106 mm)Stop Tab(PFT-60/70-STOPTAB)Blank Tab(PFT-60/70-BLANKTAB)43/16"(106 mm)21/16"(52 mm)Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.21

Patch FittingsSidelite Patch FittingsSidelite 90o Angle Patch (PFA-90)Sidelite Connector Patch (PFS-80)43/16"(106 mm)35/16"(83 mm)11/4"(32 mm)43/16"(106 mm)43/16"(106 mm)Sidelite 90o Short Angle Patch (PFA-90-SH)Sidelite Fin Patch (PFS-81)43/16"(106 mm)23/8"(60 mm)21/16"(52 mm)43/16"(106 mm)33/8"(86 mm)31/4"(83 mm)17/8"(48 mm)43/16"(106 mm)11/4"(32 mm)22Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Panic DevicesPanic DevicesCombine safety and elegance with ASSA ABLOY Glass Panic Devices. The engraved push areaand boundary grooves make exit doors stand out in a crowd. The panic device has keyed andnon-keyed functions, six standard exterior pull options, and a selection of finishes, providingcustomizable design. Whether choosing a manual or electric strike, this line provides beauty,security, and peace of mind.Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.23

Panic DevicesPanic DevicesProduct Features Top latching panic device with easy align security latch Engraved latch lines ensure proper engagement withstrike Post mount design matches Rockwood architecturalpulls Keyed and non-keyed options Six standard exterior pull options Dogging feature Engraved push area and boundary grooves allow forenhanced visibility and tactility Less than 5 lbs. of force to activate deviceSpecificationsPanic Device: PDU8000Functions Keyed Passage (dogging standard)Glass Thickness 1/2" to 3/4" thick standard-- Non-standard thickness, specifyDimensionsGrip diameter: 11/4"Vertical: (crash bar to top of tube): 281/2" min; 73" maxPatents, Approvals ANSI/BHMA A156.3-2008, Grade 1and ListingsCertified (32 and 32D finishes only) UL305, ULC-S132-07 Meets California Building Code (2013)Sec. 11B-309.4 ADA Compliant Patents PendingFinishesHorizontal: 153/4" min; 48" maxUS32/629, US32D/630, US32MS*,US32D (device) / US32 (push area) 314E,Stock Powder Coats*MS - MicroShield Antimicrobal CoatingProjection: 25/8" Panic side 31/4" Mating pull sideMaterialsStainless steelApplications Types Glass mounted Rail mountedHanding Right-hand reverse (swing 3) Left-hand reverse (swing 4)Cylinder OptionsCode 01Mortise CylinderCode 027-pin SFIC Housing w/Construction CoreCode 03Special Order (keyed alike)Code 04Customer Supplied CylinderCode 05Dummy Cylinder HousingCode 06Non-Keyed Function (blank escutcheonplate provided)Sold ThroughEngraved Push Area Finish Options*Split finish – 32D device; 32 push area (infill optional)White paintBlack paint (standard)*For custom colors, contact factory.24Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

No Mating PullFull-Height L-Shaped Pull (-1)Half-Height L-Shaped Pull (-2)Full-Height Straight Pull (-3)Half-Height Straight Pull (-4)Short Centered Straight Pull (-5)Horizontal Straight Pull (-6)Strike OptionsSingle Manual (MSK-SGL)Double Manual (MSK-DBL)Single Electric (ESK-SGL)Double Electric (ESK-DBL) Fail Safe/Fail Secure Folger Adam 310-1-3/4Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.Panic DevicesPDU8000 Exterior Pull Options Fail Safe/Fail Secure Folger Adam 310-1-3/425

Sliding Door HardwareSliding Door HardwareASSA ABLOY presents an updated and aesthetically-pleasing twist on a classic idea that allowsyou to transform a simple doorway into a stylish focal point, while recovering the in-swing andout-swing space required for hinged doors.26Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Sliding Door HardwarePemko Stainless Steel Sliding Track Hardware SystemsThe Pemko stainless steel sliding track hardware line offers multiple weight options, compatibility withRockwood Pulls, and custom track lengths to fit most application. This line is perfect when flexibility is amust in a sliding track hardware system.Features Nylon-coated wheels provide smooth, quietoperation Hangers contain anti-rise pin preventing doorlifting from track For glass doors up to 240 lbs. Five styles of door hangers that suite withRockwood door pullsSpecificationsOptionsMaximum DoorWeight:198 lbs. to 240 lbs. depending uponhanger styleDoor Thickness:For glass doors 3/8" to 1/2" thickBase Material: Stainless steel track and hangers Nylon coated rollersFinishes:US32/629, US32D/630, 314EPatents,Meets performance requirements ofApprovals, Listings: ANSI/BHMA 156.14, Grade 1, for slidingdoors by exceeding 100,000 cycles inoperationSystemComponents: Stainless steel track (6'6" or 8'2"),with end caps Hangers (2) Wall brackets Door bottom guide (1) Track stops (2) Mounting and installation hardwareG60G60 Door Weight Up to 198 lbs. Hanger Height: 35/8"G70G70 Door Weight Up to 240 lbs. Hanger Height: 311/16"G80G80 Door Weight Up to 198 lbs. Hanger Height: 311/16"For custom track lengths, contact ASSA ABLOY GlassSolutions.G90Flush Pull Options Door Thickness: 3/8" to 1/2" Dimensions: 21/4" diameterFP-OpenFP-ClosedG90 Door Weight Up to 198 lbs. Hanger Height: 41/16"G100G100 Door Weight Up to 198 lbs. Hanger Height: 35/8"Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.27

Door PullsDoor PullsComfortable grip, soft leather, and sleek form. A few words to describe our striking Rockwooddoor pulls. With endless design options to choose from, our pulls will add contemporarybeauty to any door opening.28Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Door PullsRockwood Decorative Door PullsProduct Features Solid stainless steel pulls Made with high quality, choice materials includingleather and Santoprene Heavy duty mounting features hex drive for positivetightening and oversized fasteners for superiorstrength Custom leather colors available on special order Suites with door hardware from other ASSA ABLOYGroup brands Full line of Rockwood door pulls available(see Rockwood Architectural Pull catalog)SpecificationsProjection:3"Grip Diameter:Round 11/4"LeatherOptions:English bridle leatherSquare 3/4" - 11/2"Over Length:Up to 96" availableMounting Hardware Back-to-back, heavy duty (BTBHD)Options:Decorative thru bolt, heavy duty (DTBHD)Door Thickness:1Base Material:Stainless steelFinishes:US32/629, US32D/630, US28/628, 314EB-LBRN(Light Brown)B-BUR(Burgundy)B-DBRN(Dark Brown)B-BLK(Black)B-MBRN(Medium Brown)/4" to 1"Upholstery leatherU-DBRN(Dark Brown)Part No.DescriptionFinishesRM2110MezzoTek Stepped PostRM2510SoftMet Santoprene GripUS32/629, US32D/630,314ERM3301MegaTek Post MountMounting Hardware OptionsOptionsUS32/629, US32D/630, BTBHD - Back to Back Heavy DutyUS28/628, 314, 314E DTBHD - Decorative Thru BoltHeavy DutyUS32/629RM3210/RM3401 NeoMax Post Mount GripZoneRM6010/RM6061 English Bridle Leather Surface WrappedEnglish Bridle or Upholstery LeatherUS32/629, US32D/630,RM6310Flush Wrapped314ERM7910GeoMetek Narrow ProfileCopyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.U-BLK(Black)SpecifyLeatherColorBTB - Back to Back29

Door PullsRockwood Decorative Door Pulls RM3210/RM3401RM7910Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Product FeaturesSpecifications Solid stainless steel inserts brazed into ends providesolid surface area for mounting systems Lighter weight tubular pulls reduce environmentalimpact Heavy duty mounting features hex drive for positivetightening and oversized fasteners for superiorstrengthPull Bar Projection:Door PullsRockwood Door Pulls31/2" stainless steel3" aluminumPush Bar Projection:23/4"Grip Diameter:1"Door Thickness:1Base Material:Stainless steel, aluminumFinishes:US32/629, US32D/630, US28/628,314E/4" to 1"Straight Single Bar SetsStraight Door PullsPart NumbersPart No.Description110-RKWStraight Door Pulls8"9"111-RKWNote: Solid door pull. For Tubular,reference "T" in front of part number.10"11"12"13"18"19"112118Center-to- OverallCenterLength11047Straight Single Bar Sets8"9"11147Note: Solid door pull. For Tubular,reference "T" in front of part number.10"11"12"13"18"19"1124711847Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.Mounting Hardware Options BTB - Back-to-Back HDBTB - Heavy Duty Back-to-Back DTB - Decorative Thru Bolt BTB/DTB - Back-to-Back/Decorative Thru Bolt HDBTB/DTB - Heavy Duty Back-to-Back/DecorativeThru Bolt31

Door ControlsDoor ControlsASSA ABLOY door control solutions offer precision control, making interaction with thedoor almost effortless. Our product design is proven to be easy to install and maintain,with a long-life of reliability, and ASSA ABLOY door closers and operators are tested forcompliance with the latest code requirements32Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited.

Door ControlsRIXSON 609 Overhead Concealed Door CloserThe 609 offers reliable control of interior and exterior doors, while offering the minimal appearance preferred bytop designers. A compact, cast iron body makes Rixson’s 609 an easy fit for a wide range of applications and able towithstand abuse.Product Features Medium-duty cast iron closerAdjustable spring size 1-3Double actingCenter hungEnd load arms Non-handedOptional hold open assembly built into closerSeparate closing and latching valves5 mm extended spindleAll weather fluidSpecificationsCloser: OHC-609 90 Back stop, non-hold open(OHC-609-90NHO) 90 Back stop, hold open(OHC-609-90HO) 105 Back stop, non-hold open(OHC-609-105NHO) 105 Back stop, hold open(OHC-609-105HO) Closer mounting clips pre-installed intofinished header tube(header specified separately)Maximum DoorWeight:200 lbs.Maximum DoorWidth: Interior 42" Exterior 36"Base Material: Cast iron body Radial ball bearing bottom pivotDimensions:113/4" x 33/4" x 11/2"Finishes:US32/629, US32D/630, 314EAccessories Mounting Clips (OHC-609-MC) End Load Arm (OHC-609-ARM)Patents, Meets ANSI/BHMA A156.4, Grade 1Approvals, Listings: UL / cUL listed for use on fire rated doors UL10C listed for positive pressure fire test Barrier free operation to comply withFederal Accessibility Standards (ADA);center pivoted applications comply withANSI A117.1Pivot Options Door Rail Adjustable EndloadBottom Pivot (PV-ENDLOAD) Patch Fitting Floor Mounted Pivot(PF-FM-PIVOT)Copyright 2017 ASSA ABLOY Inc. All rights reserved. Reproduction in wholeor in part without the express written permission of ASSA ABLOY Inc. is prohibited. Patch Fitting Adjustable Pivot(PF-ADJ-PIV)33

Door ControlsRIXSON 6280 Floor CloserIdeal for larger, heavier doors where ANSI Grade 1 reliability and durability are required. Whether used offset or centerhung, the 6280 concealed floor closer offers a minimal appearance that can fit the needs of a variety of openings.Product Features Heavy-duty cast iron closerAdjustable spring size 3-6Double actingCenter or offset hungNon-handedSeparate closing, latching, and backcheck/DA valvesCloser adjustable within cement case All weather fluidVariable hold open position (80-175 degrees)Variable delayed actionVariable length 3 offset or straight spindlesStainless steel cover plateWalking beam or 3/4" offset top pivotSpecificationsCloser Body withCement Case:FC-6280Maximum DoorWeight:660 lbs.Maximum DoorWidth: Interior 54" Exterior 48"Base Material: Cast iron closer body Stainless steel cover plate Zinc plated steel cement caseFinishes:US26/625, US32D/630, 314EOptional 3/4" offset armPatents, ANSI standard A156.4, Grade 1Approvals, Listings: UL/cUL listed for use onfire rated doorsPivot Options Walking Beam Pivot (PV-WALKBEAM) Patch Fitting Surface Mounted Pivot (PF-SM-PIVOT)23/8"(60 m

There are four basic configurations of glass doors as established by the Glass Association of North America (GANA). For the available variations of each style, refer to the Glass Door Configuration section. P Full door rail top and bottom BP Full door rail bottom and patch fitting t