Transcription

S4.1 CarProg TOYOTA immobiliser manualToyota Model4 ACELSIORCOLORADACOROLLAECHOESTIMA (J)GAIA (J)HIACEHIGHLANDERHILUX (J)IPSUM (J)LANDCRUISER, 100LANDCRUISER, 100MATRIXMR2PASEOPICNICPLAZ 0032001-20032003-Transponder XPHITEXTEXTEXPHITEX/CRTEXTEX/CRAll right reserved E668HC05E6S4.1.1IC601 93C56S4.1.1S4.1.1S4.1.1S4.1.224C02 ECU95080 ECU95080 ECU24C02 2IC601 31

PROGRESS NC300RAV /CRTEXTEXTEXTEX/CRS4.1.1S4.1.125080 1S4.1.125020 ECU25080 ECU95080 ECUS4.1.1 Older Toyota immobiliser system with separated immo box and Texas transponder(4D by Silca). Immobiliser box are located near to ignition key. Usually this is black or brownbox marked “immobilizer” or “134.2 kHz”.All right reserved www.codecard.lt2

Remove immobiliser ECU from the car and open it. Find 93CL66 EEPROM in DIP package. UseA5 or A4 adapter and follow CarProg instruction to program transponder key. Short quartzresonator for in-circuit EEPROM programming or remove 93C66 from immobiliser board.S4.1.2 Toyota immobiliser system with transponder antenna and AMP unit on the ignitionkey and motor ECU. Used in 1999 – 2003 Toyota/Lexus cars.All right reserved www.codecard.lt3

Transponder information is stored in motor ECU. Remove motor ECU from the car, open itand find 93C56 EEPROM marked IC900.Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Remove93C56 from ECU board, in-circuit programming is not stable.All right reserved www.codecard.lt4

S4.1.3 Toyota cars with Texas Crypto transponder (4D by Silca). Transponder key is storedin separated immobiliser unit marked “ECU IMMOBILIZER”. Remove immobiliser ECU fromthe car, open it and find 93LC66 SMD EEPROM.All right reserved www.codecard.lt5

Use only original factory key. With Silca 4D transponder car will not start.Use A6 or A4 adapter and follow CarProg instruction to program transponder key.Short quartz resonator for in-circuit EEPROM programming or remove 93C66 from immobiliserboard.S4.1.4. European Toyota immobiliser system used in small engines ECU like Yaris or Corolla.Remove motor ECU (made by Bosch) from car and open it. Find 25040 or 25020 EEPROM inSMD package.Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Shortquartz resonator for in-circuit EEPROM programming or remove EEPROM from ECU board.All right reserved www.codecard.lt6

All right reserved www.codecard.lt7

S4.1.5. European Toyota immobiliser system used from 2003 in small engines ECU like Yarisor Corolla. Used key is Texas 4C transponder.All right reserved www.codecard.lt8

Remove motor ECU (made by Bosch) from car and open it. Find 95080 or 25080 EEPROM inSMD package.Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Shortquartz resonator for in-circuit EEPROM programming or remove EEPROM from ECU board.S4.1.6. European Toyota immobiliser system used in small engines ECU like 1.4 VVT Corolla.Remove motor ECU (made by Bosch) from car and open it. Find 24C02 EEPROM in SMDpackage.Use A6 or A4 adapter and follow CarProg instruction to program transponder key.All right reserved www.codecard.lt9

S4.1.7 Older Toyota immobiliser system with separated immo box and Philips PCF7931transponder. Immobiliser box are located under dash panel. Usually this is brown box marked“immobilizer” or “125 kHz”.All right reserved www.codecard.lt10

Remove immobiliser ECU from the car and open it. Find 24C04 EEPROM in DIP package. UseA5 or A4 adapter and follow CarProg instruction to program transponder key. Short quartzresonator for in-circuit EEPROM programming or remove 24C04 from immobiliser board.S4.1.8 Toyota immobiliser system with transponder antenna and AMP unit on the ignitionkey and motor ECU. Used in 2001 – 2003 Toyota/Lexus cars.All right reserved www.codecard.lt11

Transponder information is stored in motor ECU. Remove motor ECU from the car, open itand find 93C56 EEPROM marked IC601Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Remove93C56 from immobiliser board.S4.1.9 Toyota Avensis or Corolla immobiliser system with transponder antenna and AMP unit(on the ignition key lock) and motor ECU. Transponder 4C. Are two very similar immobilisertypes – with Texas transponder and with Texas Crypto transponder. Different is onlyprocessor inside immobiliser: Texas 4C: (immobiliser unit: 89730-05010) – works only this system! Texas Crypto with “Valeo” mark on the blade (immobiliser unit: 89780-02010; Keyblank: 89785-02050, key with remote: 89070-05020)All right reserved www.codecard.lt12

Use A9 adapter, connect like in picture ( pull up pins 1, 2 and 15 and connect white, blue,green, yellow, orange, black and red wires) and follow CarProg instruction to programtransponder key.All right reserved www.codecard.lt13

S4.1 CarProg TOYOTA immobiliser manual Toyota Model Year Transponder type Instruction 4 RUNNER 1999-2003 TEX S4.1.1 2003- TEX/CR ARISTO 1998- TEX S4.1.1 AURIS TEX AVALON 1998-2003 TEX S4.1.1 2003- TEX/CR AVENSIS 1998-1999 TEX 68HC05E6 2000-2003 TEX/CR 68HC05E6 2003- TEX/CR AYGO 2005- TEX/CR