Transcription
INSTALLATION INSTRUCTIONS FOR PART 95-7417APPLICATIONSINFINITI 1996-1999 I-30MERCURY 1993-2002 VillagerNISSAN 1995-1998 200SX/240SX1998-2001 Altima / 1998-2004 Frontier1995-2003 Maxima / 1996-2004 Pathfinder/QX4 1997-20001993-2003 Quest / 1995-1999 Sentra2000-2004 Xterra95-7417KIT FEATURES DDIN Head Unit Provision Stacked ISO DIN Head Unit ProvisionKIT COMPONENTSA) DDIN Trim plate B) DDIN BracketsABTOOLS REQUIRED:Cutting Tool Phillips Screwdriver Socket Wrench1-800-221-0932www.metraonline.com COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
95-7417TABLE OF CONTENTSDash Disassembly1996-1999 Infiniti I-30 . 11993-1995 Mercury Villager /1993-1995 Nissan Quest . 21996-1998 Mercury Villager/ 1996-1998 Nissan Quest . 31999-2002 Mercury Villager /1999-2003 Nissan Quest. 41995-1999 Nissan Sentra /1995-1998 200 SX. 51995-1998 Nissan 240 SX. 61998-2001 Nissan Altima . 71998-2001 Nissan Frontier/2000-2001 Nissan Xterra . 82002-2004 Nissan Frontier/2002-2004 Nissan Xterra . 91995-1999 Nissan Maxima. 10* 2000-2003 Nissan Maxima. 111996-2000 Nissan Pathfinder/QX4 1997-2000. 122001-2004 Nissan Pathfinder. 13* Fits all models EXCEPT the Bose and Comfort & Convenience pkgs.Kit AssemblyDouble DIN Head Unit Provision. 14Stacked ISO DIN Head Unit Provision . 15Final Assembly .16KNOWLEDGE IS POWEREnhance your installation and fabrication skillsby enrolling in the most recognized and respectedmobile electronics school in our industry.Log onto www.installerinstitute.comor call 800-354-6782 for more informationand take steps toward a better tomorrow.CAUTION:Do not cycle the key when removing a dash with passengerairbag ON/OFF switch.
95-7417DASH DISASSEMBLY1996-1999 INFINITI I-301Disconnect the negative batteryterminal to prevent an accidentalshort circuit.2Unclip and remove the shift levertrim panel and remove the (2)screws exposed.3Remove (1) screw to the left of theashtray then unclip and remove theashtray assembly.4Unclip and remove the clock/ventassembly.5Remove (4) screws securing theradio.1
95-7417DASH DISASSEMBLY1993-1995 MERCURY VILLAGER1993-1995 NISSAN QUEST1Disconnect the negative batteryterminal to prevent an accidentalshort circuit.2Remove (1) screw above the climatecontrols.3Unclip and remove the radio trimpanel.4Remove (4) screws securing theradio.2
95-7417DASH DISASSEMBLY1996-1998 MERCURY VILLAGER1996-1998 NISSAN QUEST1Disconnect the negative batteryterminal to prevent an accidentalshort circuit.2Remove (4) plastic screws andscrew anchors from the base of thestorage compartment then removethe compartment.3Remove (2) Phillips screws from thebase of the radio trim panel.4Remove (2) Phillips screws fromabove the radio opening.5Remove the ashtray.6Remove (4) screws securing theradio.3
95-7417DASH DISASSEMBLY1999-2002 MERCURY VILLAGER1999-2003 NISSAN QUEST1Disconnect the negative batteryterminal to prevent an accidentalshort circuit.2Open the ashtray/cupholder assembly and depress the retaining clipson each side to remove.3Remove (2) Phillips screws fromeach side of the ashtray/cupholder.4Remove (4) plastic rivets from thelower pocket and slide the pocketback. Note: It is not necessary tofully remove the pocket.5Unclip the dash trim panel andremove.6Remove (4) Phillips screws securingthe radio.4
95-7417DASH DISASSEMBLY1995-1999 NISSAN SENTRA1995-1998 200 SX1Disconnect the negative batteryterminal to prevent an accidentalshort circuit.2Unclip and remove the dummy plateabove the climate controls.3Remove (1) Phillips screw frombehind dummy plate.4Unclip and remove radio trim panel.5Remove (4) Phillips screws securingradio.5
95-7417DASH DISASSEMBLY1995-1998 NISSAN 240 SX1Disconnect the negative battery terminal to prevent an accidental shortcircuit.2Unclip and remove the climate control trim panel and remove the (2)exposed behind.3Unclip and remove the shift levertrim panel and remove the (2) screwsexposed behind.4Remove the ashtray and (1) Phillipsscrew exposed in the ashtray cavity.5Unclip and remove the radio trimpanel, factory radio and pocketassembly.6
95-7417DASH DISASSEMBLY1998-2001 NISSAN ALTIMA1Disconnect the negative battery terminalto prevent an accidental short circuit.2Unclip the shift lever trim panel andremove (2) Phillips screws at the baseof the radio trim panel.3Remove (2) Phillips screws above theradio opening.4Unclip and remove the radio trim panel.5Remove (4) Phillips screws securing theradio.71
95-7417DASH DISASSEMBLY1998-2001 NISSAN FRONTIER2000-2001 NISSAN XTERRA1Disconnect the negative battery terminalto prevent an accidental short circuit.2Remove the ashtray and the (2) Phillipsscrews exposed in the ashtray cavity.3Unclip and remove the radio trim panel.4Remove (4) Phillips screws securing theradio.8
95-7417DASH DISASSEMBLY2002-2004 NISSAN FRONTIER2002-2004 NISSAN XTERRA1Disconnect the negative battery terminalto prevent an accidental short circuit.2Unclip and remove the shift lever trimpanel.3Remove (2) Phillips screws exposed inthe shift lever cavity.4Remove (2) Phillips screws under theclimate control.5Unclip and remove the radio trim panel.6Remove (4) Phillips screws securing theradio.9
95-7417DASH DISASSEMBLY1995-1999 NISSAN MAXIMA1Disconnect the negative battery terminalto prevent an accidental short circuit.2Unclip the shift lever trim panel.3Remove the (2) Phillips screws at thebase of the radio trim panel.4Remove (1) Phillips screw to the left ofthe ashtray and unclip the ashtrayassembly.5Unclip and remove the clock/ventassembly.6Remove (4) Phillips screws securing theradio.10
95-7417DASH DISASSEMBLY2000-2003 NISSAN MAXIMA1Disconnect the negative battery terminalto prevent an accidental short circuit.2Unclip and remove the vent/radio trimpanel. Note: For Bose systems the ventassembly will be removed without thetrim panel.3Remove the ashtray insert and (1)Phillips screw exposed behind.4Unclip and remove the shift lever/ashtray trim panel.5Remove (2) Phillips screws above theradio and (2) Phillips screws below theclimate control panel then remove theradio/climate control assembly.25511554
95-7417DASH DISASSEMBLY1996-2000 NISSAN PATHFINDER/QX4 1997-20001Disconnect the negative battery terminalto prevent an accidental short circuit.2Remove (2) Phillips screws from thebase of the radio trim panel.3Unclip and remove the radio trim panel.4Remove (4) Phillips screws securingradio.12
95-7417DASH DISASSEMBLY2001-2003 NISSAN PATHFINDER1Disconnect the negative battery terminalto prevent an accidental short circuit.2Unclip and remove the vent/clockassembly. (Figure A)3Remove (2) Phillips screws from the topof the radio trim panel then remove thepanel. (Figure B)4Remove (4) Phillips screws securingradio. (Figure C)ABC13
95-7417KIT ASSEMBLYDOUBLE DIN HEAD UNIT PROVISIONA1Slide the appropriate bracket intothe trim plate aligning the holes inthe trim plate to the clips on thebracket. (Figure A)2Attach the factory mounting bracketsand the 95-7417 DDIN trimplate/bracket assembly to the DDINhead unit with the screws suppliedwith the unit. (Figure B)B14
95-7417KIT ASSEMBLYSTACKED ISO DIN HEAD UNIT PROVISIONA1Slide the appropriate bracket intothe trim plate aligning the holes inthe trim plate to the clips on thebracket. (Figure A)2Attach the factory mounting bracketsand the 95-7417 DDIN trimplate/bracket assembly to thestacked ISO DIN head units with thescrews supplied with the units.(Figure B)B15
95-7417FINAL ASSEMBLYFINAL ASSEMBLY1 Locate the factory wiring harness in the dash and make the connection as shown.Metra recomends using the proper mating adapter and making the connections asshown. (Isolate and individually tape off the ends of any unused wires to preventelectrical short circuit.)2 Re-connect the negative battery terminal and test the unit for proper operation.3 Reassemble radio and dash assemblies in reverse order of disassembly.FINAL WIRING CONNECTIONSMake wiring connections using the EIA color code chart shown below and the instructions included with the headunit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individuallytape off ends of any unused wires to prevent electrical short circuit.ABCA)Strip wire ends back 1/2"B)Twist ends togetherC)SolderD)TapeDMETRA / EIA WIRING CODE12V Ignition / Acc . . . Red12V Batt / Memory . . YellowGround . . . . . . . . . . . Black*Power Antenna . . . . . BlueAmp Turn-On . . . . . . Blue / WhiteAmp Ground . . . . . . . Black / WhiteIllumination. . . . . . . . OrangeDimmer . . . . . . . . . . Orange / WhiteRight Front ( ) . . . . . GrayRight Front (-). . . . . . Gray / BlackLeft Front ( ) . . . . . . WhiteLeft Front (-) . . . . . . . White / BlackRight Rear ( ). . . . . . VioletRight Rear (-) . . . . . . Violet / BlackLeft Rear ( ). . . . . . . GreenLeft Rear (-) . . . . . . . Green / Black*NOTE: When Black a wire is not present, ground radio to vehicle chassis.All colors may not be present on all leads due to manufacturer’s specifications.16
95-7417NOTES17
95-7417 INSTRUCTIONS1-800-221-0932REV. 07/28/09www.metraonline.com COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATIONINST95-7417
95-7417 DASH DISASSEMBLY 1993-1995 MERCURY VILLAGER 1993-1995 NISSAN QUEST Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (1)
