Transcription

User’s manualCS6419/CS6419-15/CS6419-16/CS6419-2DECT 6.0 cordless telephoneRegister online to get an additional 3-month warranty!Go to www.vtechphones.com to register your product for enhanced warrantysupport and latest VTech product news. The ENERGY STAR program (www.energystar.gov) recognizes andencourages the use of products that save energy and help protect ourenvironment.We are proud to mark this product with the ENERGY STAR label indicating it meets the latest energy efficiency guidelines.Compatible withHearing Aid T-CoilTelephones identified with this logo have reduced noise andinterference when used with most T-coil equipped hearing aids andcochlear implants. The TIA-1083 Compliant Logo is a trademark ofthe Telecommunications Industry Association. Used under license.TTIA-1083IntroductionTo protect our environment and conserve natural resources, this user’smanual provides you with the basic installation and use instructions. A limitedset of features are described in abbreviated form.Please refer to the online User’s manual for a full set of installation andoperation instructions at www.vtechphones.com.Before using this VTech product, please read Important safety instructionson page 11 of this user’s manual.Parts checklistYour telephone package contains the following items. Save your salesreceipt and original packaging in the event warranty service is necessary.Telephone linecordBattery compartmentcoverBattery(1 for CS6419, CS6419-15 andCS6419-16, and 2 for CS6419-2)Handset(1 for CS6419,CS6419-15 andCS6419-16, and2 for CS6419-2)Telephone base(1 for CS6419, CS6419-15and CS6419-16, and2 for CS6419-2)Charger andcharger adapterTelephone basepower adapterWall mount bracket(1 for CS6419-2)User’s manualUser’s manualBC

Telephone base and charger installationInstall the telephone base and charger as shown below.Telephone basepower adapterTelephonewall jackIf you have DSLhigh speed Internetservice, a DSL filter(not included) isrequired.Electricaloutlet notcontrolled by awall switchCharger adapterElectricaloutlet notcontrolled bya wall switchTelephoneline cordTelephone base ChargerUse only the power adapter and battery supplied with this product.To order a replacement, visit our website at www.vtechphones.com orcall 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call1 (800) 267-7377.The power adapter is intended to be correctly oriented in a vertical orfloor mount position. The prongs are not designed to hold the plug inplace if it is plugged into a ceiling, under-the-table or cabinet outlet.Battery installationInstall the battery as shown below.1 Plug the battery connectorsecurely into the socket.2 Place the battery with the labelTHIS SIDE UP facing up andthe wires inside the batterycompartment.3 Slide the battery compartmentcover towards the center of thehandset until it clicks into place.4 Place the handset in thetelephone base or chargerto charge.CHARGE lightremains on whencharging.If the handset will not be used for a long time, disconnect and remove thebattery to prevent possible leakage.Battery chargingOnce you have installed the battery, the screen indicates the battery status (seethe table on the next page). For best performance, keep the handset in the telephone base or chargerwhen not in use.The battery is fully charged after 10 hours of continuous charging.If you place the handset in the telephone base or the charger withoutplugging in the battery, the screen displays NO BATTERY.

Battery indicatorsBattery statusActionThe screen is blank,Battery has no chargeor shows PLACE INor very little charge. TheCHARGER and flashes. handset cannotbe used.Charge withoutinterruption (at least30 minutes).The screen showsLOW BATTERY andflashes.Battery has enoughcharge to be used fora short time.Charge withoutinterruption (at least30 minutes).The screen showsHANDSET X.Battery is charged.To keep the batterycharged, place it inthe telephone base orcharger when not in use.Tabletop to wall mount installationThe telephone comes ready for tabletop use. Follow the steps below tomount your telephone on a wall.1 Plug one end of the telephoneline cord into the TEL LINEjack at the bottom of thetelephone base and the basepower adapter into thePOWER jack.2 Position the telephone baseagainst the wall mount bracketas shown. Insert the extendedtabs marked B on the wallmount bracket into the slotsmarked B on the back of thetelephone base.3 Route the telephone line cordthrough the hole on the wallmount bracket and plug it intothe telephone wall jack. Routethe power cord out of thetelephone base and plug it intoan electrical outlet not controlledby a wall switch.4 Align the holes on the bracketwith the standard wall plate andslide the bracket down until itlocks securely. Bundle thetelephone line cord and poweradapter cord neatly withtwist ties.Telephone base overviewIN USE lightOn when the handset is in use.Flashes quickly when there is anincoming call.Flashes slowly when anothertelephone sharing the same lineis in use./FIND HANDSETPress once and then release topage all system handsets.

Handset overviewCID /VOLUMECHARGE lightReview the call log when thetelephone is not in use.Decrease the listening volumeduring a call.Scroll down while in a menu, or inthe directory, call log or redial list.Move the cursor to the left whenentering numbers or names.On when the handset is charging./VOLUMEReview the directory whenthe telephone is not in use.Increase the listeningvolume during a call.Scroll up while in a menu, orin the directory, call log orredial list.Move the cursor to the rightwhen entering numbersor names.MENU/SELECTShow the menu.While in a menu, press toselect an item, or save anentry or setting.MUTE/DELETEOFF/CANCELMute the microphone duringa call.Delete digits or characterswhile using the dialling keys.Silence the ringer temporarilywhile the handset is ringing.Delete the displayed entrywhile in the directory, call logor redial list.Hang up a call.Silence the ringertemporarily while thehandset is ringing.Press and hold to erase themissed call indicator whilethe telephone is not in use.Press to return to theprevious menu, orpress and hold to returnto idle mode, withoutmaking changes./FLASHMake or answer a call.Answer another incomingcall during a call.Dialing keysEnter numbers or characters.1# (pound key)Press repeatedly to add orremove 1 in front of the calllog entry before dialing orsaving it to the directory.Press repeatedly to showother dialing options whenreviewing a call log entry.TONEINT (intercom)Switch to tone dialingtemporarily during a call.Start an intercom conversation ortransfer a call (for multi-handsetmodels only).(speakerphone)REDIAL/PAUSEPress to make or answer a callusing the handset speakerphone.During a call, press to switchbetween the speakerphoneand the handset.Press repeatedly to review theredial list.Press and hold to insert a dialingpause while entering numbers in thedirectory.Using the menuTo enter the handset menu: . Press MENU/SELECT when the telephone is not in use.2. Press or until the screen displays the desired feature menu.3. Press MENU /SELECT to enter that menu. To return to the previous menu, press OFF/CANCEL. To return to idle mode, press and hold OFF/CANCEL.Telephone settingsDefault settings are indicated by an asterisk(*).Screen displayFunctionOptionsLCD LANGUAGESet the screen display language.ENGLISH*FRANÇAISESPAÑOLCLR VOICEMAILTurn off the voicemail indicators.TURN OFFINDICATOR?KEY TONETurn an audible beep on or off whenevera key is pressed.ON*OFFSET DATE/TIMESet the date and time shown onthe handset.-:-- --/--HOME AREA CODEEnter your home area code if you dial onlyseven digits for local calls.DIAL MODESet the telephone to be tone orpulse dialing.TONE*PULSE

The following are some of the telephone features you may wish to set.Refer to Telephone settings in the online user’s manual for detailedinstructions on setting all telephone features.Ringer volumeYou can adjust the ringer volume level, or turn the ringer off. . Press MENU/SELECT when the handset is not in use.2. Scroll to RINGERS, then press MENU /SELECT.3. Press MENU /SELECT to select RINGER VOLUME.4. Press or to sample each volume level.5. Press MENU /SELECT to save. If the handset ringer volume is set to off, that handset is silenced for allincoming calls except paging tone.The ringer volume also determines the ringer volume of the intercomcalls and the volume of the paging tone.Set date and timeIf you subscribe to caller ID service, the day, month and time are setautomatically with each incoming call.To set the date and time manually: . Press MENU/SELECT when the handset is not in use.2. Scroll to select SETTINGS, then press MENU/SELECT.3. Scroll to select SET DATE/TIME, then press MENU/SELECT.4. Use the dialing keys (0-9) to enter the month, date and year.Press MENU/SELECT to advance to set the time.5. Use the dialing keys (0-9) to enter the hour and minute.6. Press or to choose AM or PM, or press 2 for AM or 7 for PM. PressMENU/SELECT to save.Voicemail indicatorsIf you subscribe to voicemail service offered by your telephone serviceprovider, NEW VOICEMAIL andappear on the handset when you havenew voicemail messages. Contact your telephone service provider for moreinformation and assistance about using your voicemail service. Refer toClear voicemail indicators in the online user’s manual on how to clear thevoicemail indicators.Telephone operationMake a call Press /FLASH or , and then dial the telephonenumber.-OR Predial by first dialing the telephone number andthen press /FLASH or .Answer a call Press/FLASH,or any dialing key (0-9, TONE or #).End a call Press OFF/CANCEL or put the handset to the telephone base or charger.Speakerphone During a call, presshandset use.to switch between speakerphone and normalVolume During a call, presslistening volume./VOLUME or/VOLUME to adjust theThe handset earpiece volume setting and speakerphone volume settingare independent.MuteThe mute function allows you to hear the other party but the other partycannot hear you. . During a call, press MUTE/DELETE. The screen displays MUTED for a fewseconds and then MUTE appears until the mute function is turned off.2. Press MUTE/DELETE again to resume the conversation. The screentemporarily displays MICROPHONE ON.

Call waitingWhen you subscribe to call waiting service from your telephone serviceprovider, you hear an alert tone if there is an incoming call while you are onanother call. Press/FLASH to put the current call on hold and take the new call. Press/FLASH at any time to switch back and forth between calls.Temporary ringer silencingWhen the telephone is ringing, you can temporarily silence the ringer of thehandset without disconnecting the call. The next call rings normally at thepreset volume. To silence the handset ringer, press OFF/CANCEL or MUTE/DELETE onthe handset. RINGER MUTED anddisplay.Temporary tone dialingIf you have pulse (rotary) service only, you can switch from pulse to tonedialing temporarily during a call. . During a call, press TONE .2. Use the dialing keys to enter the relevant number. The telephone sendstouch-tone signals.3. The telephone automatically returns to pulse dialing mode after you endthe call.Find handsetUse this feature to find all system handsets.To start paging: Press /FIND HANDSET on the telephone base once and then release.All idle handsets ring and their screens show ** PAGING **.To end paging: Press /FIND HANDSET again on the telephone base once andthen release. Press /FLASH, or any dialing key (0-9, TONE or #) on the handset. Place the handset in the telephone base or charger.Do not press and hold /FIND HANDSET for more than four seconds. It maylead to handset deregistration. If 1.PRESS FIND HS ON BASE 4 SEC and2.THEN PRESS # ON HANDSET display alternately on the handset, referto Troubleshooting to register the handset to the telephone base.Redial listEach handset stores the last 10 telephone numbers dialed.To review and dial a number from the redial list: . Press REDIAL/PAUSE when the handset is not in use.2. Press , , or REDIAL/PAUSE repeatedly until the desired entry displays.3. Press /FLASH to dial.To delete a redial entry:When the desired redial entry displays, press MUTE/DELETE.Join a call in progressYou can use up to two system handsets at a time on an outside call. Youcan buy additional expansion handsets (CS6409) for this telephone base.You can register up to five handsets to the telephone base. When a handset is on a call, press /FLASH or on another handset tojoin the call. Press OFF/CANCEL to exit the call. The call continues until all handsetshang up.IntercomUse the intercom features for conversations between two handsets. . Press INT on your handset when it is not in use. When you havethree or more handsets, use the dialing keys to enter a destinationhandset number.2. To answer the intercom call, press /FLASH, , INT or any dialing key(0-9, TONE , #) on the destination handset.3. To end an intercom call, press OFF/CANCEL or place the handset back inthe telephone base or charger.

Answer an incoming call during an intercom callIf you receive an outside call during an intercom call, there is an alert tone. To answer the outside call, press /FLASH. The intercom callends automatically. To end the intercom call without answering the outside call, pressOFF/CANCEL. The intercom call ends and the telephone continuesto ring.Call transfer using intercomUse the intercom feature to transfer an outside call to another system handset. . During a call, press INT. When you have three or more handsets, usethe dialing keys to enter a destination handset number.2. To answer the intercom call, press /FLASH, , INT or any dialing key(0-9, TONE , #) on the destination handset. The outside call is still onhold and both handsets now show INTERCOM. You can now have aprivate conversation with the destination handset.3. From this intercom call, you have the following options: You can let the destination handset join you on the outside call in athree-way conversation. Press and hold INT on the original handset. You can transfer the call. Press OFF/CANCEL, or place your handsetback in the telephone base or charger. Your handset screen showsCALL TRANSFERRED. The destination handset then automaticallyconnects to the outside call. You can press INT to switch between the outside call (OUTSIDECALL displays) and the intercom call (INTERCOM displays). The destination handset can end the intercom call by pressingOFF/CANCEL, or by placing the handset back in the telephone base orcharger. The outside call continues with the original system handset.DirectoryThe directory can store up to 50 entries and are shared by allsystem handsets.To add a directory entry: . Press MENU/SELECT twice.2. Scroll to ADD CONTACT, then press MENU/SELECT. When the screendisplays ENTER NUMBER: Use the dialing keys to enter the number (up to 30 digits).-OR Copy a number from the redial list by pressing REDIAL/PAUSE andthen press , or REDIAL/PAUSE repeatedly to select a number.Press MENU/SELECT to copy the number.3. Press MENU/SELECT to move to the name.4. When the screen displays ENTER NAME, use the dialing keys to enterthe name (up to 15 characters). Additional key presses show othercharacters of that particular key.5. Press MENU/SELECT to store the entry.While entering names and numbers, you can: Press MUTE/DELETE to backspace and erase a digit or character. Press and hold MUTE/DELETE to erase the entire entry. Press and hold REDIAL/PAUSE to insert a dialing pause (for enteringphone numbers only). Press or to move the cursor to the left or right. Press 0 to add a space (for entering names only).To review and dial from the directory:Entries are sorted alphabetically. . Presswhen the handset is not in use.2. Scroll to browse through the directory, or use the dialing keys to start aname search.3. When the desired entry appears, press /FLASH or to dial.To edit a directory entry: . When the desired entry displays, press MENU/SELECT.2. When the screen displays EDIT NUMBER, use the dialing keys to edit.3. Press MENU/SELECT.4. When the screen displays EDIT NAME, use the dialing keys to edit.5. Press MENU/SELECT to save.To delete a directory entry: . When the desired entry displays, press MUTE/DELETE.2. When the screen displays DELETE CONTACT?, press MENU/SELECT.

Speed dialYou can copy up to 10 directory entries into the speed dial locations so thatyou can dial these numbers using fewer keys than usual.To store a speed dial entry: .2.3.4.Press MENU/SELECT twice when the handset is not in use.Scroll to SPEED DIAL, then press MENU/SELECT.Scroll to a desired speed dial location, then press MENU/SELECT.Scroll to a desired directory entry, then press MENU/SELECT to save.To dial a speed dial entry: . Press and hold a dialing key (0 through 9) to display the desired speeddial entry when the handset is not in use.2. Press /FLASH or to dial the displayed telephone number.To delete a speed dial entry:When the desired entry displays, press MUTE/DELETE. EMPTY appears.Caller IDThis product supports caller ID services provided by most telephone serviceproviders. Depending on your service subscription, you may see the caller’sname, number, date and time of calls that are sent by your telephoneservice provider after the first or second ring.Call logThe call log stores up to 50 entries. If you answer a call before the callerinformation appears, it will not be saved in the call log. The handset displays XX MISSED CALLS when there are calls thathave not been reviewed in the call log. If you want to erase the missed call indicator, press and holdOFF/CANCEL on the idle handset.To review and dial a number in the call log: . Press CID when the handset is not in use.2. Scroll to browse through the call log. When the desired entry appears: Press # (pound key) repeatedly to show different dialing options. Press 1 repeatedly if you need to add or remove 1 in front of thetelephone number.3. Press /FLASH to dial the displayed number.To save a call log entry to the directory: . When the desired call log entry displays, press MENU/SELECT.2. When the screen displays EDIT NUMBER, use the dialing keys tomodify the number if necessary.3. Press MENU/SELECT.4. When the screen displays EDIT NAME, use the dialing keys to modifythe name if necessary.5. Press MENU/SELECT to save.To delete the call log entries: Delete one entry: When the desired call log entry displays, pressMUTE/DELETE. Delete all entries: Press MENU/SELECT when the handset is not in use.Scroll to CALL LOG and then press MENU/SELECT. Scroll to DEL ALL CALLS and then press MENU/SELECT twice.Add and register a handsetThe handsets provided with your telephone system are already registered.Each handset is assigned a number that show on the handset display.Additional handsets registered to the telephone system are assignednumbers in sequential order. This telephone system accommodates up tofive handsets.You can add new handsets (CS6409, purchased separately) to yourtelephone system. Each handset must be registered with the telephonebase before use. When first purchased and properly charged, eachexpansion handset shows 1.PRESS FIND HS ON BASE 4 SEC and2.THEN PRESS # ON HANDSET alternately. You need to charge thehandset before registering it to the telephone base.To register a handset: . Place the unregistered handset in the telephone base or charger. If1.PRESS FIND HS ON BASE 4 SEC and2.THEN PRESS # ON HANDSET do not appear alternately on thehandset after a few seconds, remove the handset and place it in thetelephone base or charger again.

2. On the telephone base, press and hold /FIND HANDSET for about fourseconds until the red IN USE light on it turns on.3. On the handset, press # (pound key) and the handset showsREGISTERING. PLEASE WAIT. The handset showsHANDSET REGISTERED and you hear a beep when the registrationprocess completes. It takes about 60 seconds to complete the process.Replace a handsetIf you want to replace a handset or reassign the designated handsetnumber of a registered handset, you must deregister all handsets and thenindividually register each handset.To make deregistration easier, read all of the instructions below beforeyou begin.To deregister all handsets: . Press and hold /FIND HANDSET on the telephone base for about 10seconds until the IN USE light on the telephone base turns on and startsto flash.2. Press and release /FIND HANDSET again. You must press/FIND HANDSET while the IN USE light is still flashing. The IN USElight flashes for approximately five seconds.3. All handsets show 1.PRESS FIND HS ON BASE 4 SEC and2.THEN PRESS # ON HANDSET alternately when the deregistrationprocess completes. The deregistration process takes about 10 secondsto complete.TroubleshootingIf you have difficulty with your telephone, please try the suggestions below.For customer service, visit our website at www.vtechphones.com or call1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call1 (800) 267-7377.My telephone does not work at all. Make sure the battery is installed and charged correctly. For optimum dailyperformance, return the handset to the telephone base after use. Make sure the power adapter is securely plugged into an outlet not controlled by awall switch. Make sure the telephone line cord is plugged firmly into the telephone base and thewall jack. Unplug the electrical power to the telephone base. Wait for approximately 15 seconds,then plug it back in. Allow up to one minute for the cordless handset and telephone baseto synchronize. Charge the battery in the handset for up to 10 hours. If the battery is completely depleted, it may take up to 30 minutes to charge the handsetbefore LOW BATTERY appears on the screen. Remove and install the battery again. If that still does not work, it may be necessary topurchase a new battery. Disconnect the telephone base from the telephone wall jack and plug in a workingtelephone. If the other telephone does not work, the problem is probably in the wiring orlocal telephone service. Contact your telephone service provider.The display shows NO LINE. I cannot get a dial tone. Try all the above suggestions. Make sure the telephone line cord is plugged firmly into the telephone base and thewall jack. Disconnect the telephone line cord from your telephone and connect it to anothertelephone. If there is no dial tone on that other telephone either, then the telephone linecord may be defective. Try installing a new telephone line cord.If changing the telephone line cord does not help, the wall jack (or the wiring to this walljack) may be defective. Contact your telephone service provider.I cannot dial out. Try all the above suggestions. Make sure there is a dial tone before dialing. It is normal if the handset takes a second ortwo to synchronize with the telephone base before producing a dial tone. Wait an extrasecond before dialing. If other telephones in your home are having the same problem, the problem is in the wiring orlocal telephone service. Contact your telephone service provider (charges may apply). Eliminate any background noise. Mute the cordless handset before dialing, or dial fromanother room in your home with less background noise.1.PRESS FIND HS ON BASE 4 SEC and 2.THEN PRESS # ON HANDSET appearalternately on the handset and it does not work at all. The handset may be deregistered from the telephone base. Refer to Add and register ahandset to register the handset to the telephone base.LOW BATTERY shows on the handset screen. Place the handset in the telephone base or charger for recharging. Remove and install the battery again and use it until fully depleted, then charge thehandset in the telephone base or charger for up to 10 hours. If the above measures do not correct the problem, replace the battery.The battery does not charge in the handset or the handset battery does notaccept charge. Make sure the handset is placed in the telephone base or charger correctly. TheCHARGE light on the handset should be on. Remove and install the battery again, then charge for up to 10 hours.

The CHARGE light is off. Clean the charging contacts on the handset, telephone base and charger each month witha pencil eraser or a dry non-abrasive fabric. Make sure the power adapter and telephone line cord are plugged in correctly and securely. Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to oneminute for the handset and telephone base to reset.The telephone does not ring when there is an incoming call. Make sure the handset ringer volume is not set to off. Make sure the telephone line cord and power adapter are plugged in properly. The handset may be too far from the telephone base. Move it closer to thetelephone base. There may be too many extension phones on the telephone line to allow all of them to ringsimultaneously. Unplug some of them. If other telephones in your home are having the same problem, the problem is in the wiringor local telephone service. Contact your telephone service provider (charges may apply). Other electronic products such as HAM radios and other DECT phones can causeinterference with your cordless phone. Try installing your phone as far away aspossible from these types of electronic devices. Test a working telephone at the telephone wall jack. If another telephone has the sameproblem, the problem is in the telephone wall jack. Contact your telephone service provider(charges may apply). The telephone line cord may be malfunctioning. Install a new telephone line cord. Remove and install the battery again and then place the handset in the telephone base. Wait for the handset to synchronize with the telephone base. Allow up to one minute forthis to take place.My caller ID features are not working properly. Caller ID is a subscription service. You must subscribe to this service from yourtelephone service provider for this feature to work on your telephone. The caller may not be calling from an area which supports caller ID. Both your and your caller’s telephone service providers must use equipmentcompatible with the caller ID service. The caller ID information shows after the first or second ring. If you subscribe to high-speed Internet service (DSL - digital subscribe line) throughyour telephone line, you must install a DSL filter between the telephone line cord andthe telephone wall jack. The filter prevents noise and caller ID problems caused by DSLinterference. Contact your DSL service provider for more information about DSL filters.My handset beeps and is not performing normally. Make sure the power cord is securely plugged into the telephone base. Plug thetelephone base into a different working electrical outlet not controlled by a wall switch. Move the handset closer to the telephone base. It may be out of range. Reset the telephone base by unplugging the electrical power to the base. Wait for 15seconds and plug it back in again. Allow up to one minute for the cordless handset and thetelephone base to synchronize. Other electronic products such as HAM radios and other DECT phones can causeinterference with your cordless phone. Try installing your phone as far away as possiblefrom these types of electronic devices.There is interference during a telephone conversation.My calls fade out when I am using the cordless handset. The handset may be out of range. Move it closer to the telephone base. If you subscribe to high-speed Internet service (DSL - digital subscriber line) throughyour telephone line, you must install a DSL filter between the telephone line cord andthe telephone wall jack. The filter prevents noise and caller ID problems caused by DSLinterference. Contact your DSL service provider for more information about DSL filters. Appliances or other cordless telephones plugged into the same circuit as thetelephone base can cause interference. Try moving the appliance or telephone base toanother outlet. Other electronic products such as HAM radios and other DECT phones can causeinterference with your cordless phone. Try installing your phone as far away aspossible from these types of electronic devices. If your telephone is plugged in with a modem or a surge protector, plug the telephone (ormodem/surge protector) into a different location. If this doesn’t solve the problem, relocateyour telephone or modem farther apart from each other, or use a differentsurge protector. The location of your telephone base can impact the performance of your cordless phone.For better reception, install the telephone base in a centralized location within your homeor office, away from walls or other obstructions. In many environments, elevating thetelephone base improves overall performance. Disconnect the telephone base from the telephone wall jack and plug in a cordedtelephone. If calls are still not clear, the problem is probably in the wiring or local telephoneservice. Contact your telephone service provider (charges may apply). If other telephones in your home are having the same problem, the problem is in the wiringor local telephone service. Contact your telephone service provider (charges may apply).I hear other calls when using the telephone. Disconnect the telephone base from the telephone wall jack. Plug in a different telephone.If you still hear other calls, the problem is probably in the wiring or local telephone service.Contact your telephone service provider.I hear noise on the cordless handset and the keys do not work. Make sure the telephone line cord is plugged in securely.OUT OF RANGE OR NO PWR AT BASE shows on the handset screen. The handset may be out of range. Move it closer to the telephone base. Make sure the power cord is securely plugged into the telephone base. Use a workingelectrical outlet not controlled by a wall switch. Reset your telephone by unplugging the power adapter from t

provider, NEW VOICEMAIL and appear on the handset when you have new voicemail messages. Contact your telephone service provider for more information and assistance about using your voicemail service. Refer to Clear voicemail indicators in the online user’s manual on how to clear the voice