Transcription

Operation ManualSmart-UPS X-SeriesUPS750 VA1000 VA1500 VA120V230V

Overview. 1About the UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Network Management Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2External Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Operation. 3Connect Equipment to the UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Display Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Using the display interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Standard Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Advanced Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Configuration . 6UPS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Start-up Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6General Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Controllable Outlet Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Model-specific Controllable Outlet Groups . . . . . . . . . . . . . . . . . . . . 9Using the Controllable Outlet Groups and UPS outlets . . . . . . . . . 10Customize the Controllable Outlet Groups and the UPS outlets . 10Network Management Card Settings . . . . . . . . . . . . . . . . . . . . . . . . 11Smart-UPS X-Series Operationi

Emergency Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12EPO Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Normally open contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Normally closed contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Troubleshooting . 13Service and Support. 15Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Transport the UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16APC Worldwide Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . 16Smart-UPS Factory Warranty . 17LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17iiSmart-UPS X-Series Operation

OverviewAbout the UPSThe APC by Schneider Electric Smart-UPS X-Series is a high performance uninterruptible powersupply (UPS). It provides protection for electronic equipment from utility power blackouts, brownouts,sags, and surges; small utility fluctuations and large disturbances. The UPS also provides battery backuppower until utility power returns to safe levels or the batteries are fully discharged.SafetyRead the Safety Guide included in the package before installing the UPS.Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.Recycle the packaging.Heavy: The UPS is heavy. If you are installing any external battery packs (XLBPs) with theUPS, install the XLBPs first, at the bottom of the rack, and install the UPS last, above theXLBPs.Product OverviewFront panelBatteryBattery connectorDisplay interfaceBezelsu0443a Smart slot120 VExternal battery pack connectorOutletsEPO connectorUSB portSerial portTVSS ground screwUPS inputCircuit breakerSmart-UPS X-Series Operationsu0340aRear panel1

su0341a230 V2Smart-UPS X-Series Operation

SpecificationsOperating ConditionsThis unit is intended for indoor use only. Select a location sturdy enough to support the weight of theUPS and External Battery Packs (XLBP).Do not operate the unit where there is excessive dust, or the temperature or humidity are outside thespecified limits.This unit has front and rear air vents. Allow adequate space for proper ventilation.Environmental SpecificationsEnvironmental factors impact battery life. High temperatures, poor utility power, and frequent, shortduration discharges will shorten battery life.For additional specifications, see the APC Web site at www.apc.com.Operating0 to 40 C (32 to 104 F)TemperatureStorage-15 to 45 C (5 to 113 F)charge UPS battery every six monthsMaximumElevationOperating3,000 m (10,000 ft)Storage15,000 m (50,000 ft)Humidity0% to 95% relative humidity, non-condensingInstallationUPSFor UPS installation information, see the Smart-UPS X-Series Quick-Start guide that isincluded with the UPS. The guide is also available on the enclosed CD and the APC Web siteat www.apc.com.Network Management CardFor installation information, see the user manual provided with the Network ManagementCard (NMC). The user manual is also available on the APC Web site at www.apc.com.External Battery PackFor installation information, see the Smart-UPS X-Series External Battery Pack Installationguide that is included with the external battery pack. The guide is also available on theenclosed CD and the APC Web site at www.apc.com.Smart-UPS X-Series Operation3

OperationConnect Equipment to the UPSNote: The UPS will charge to 90% capacity in the first three hours of normal operation. Donot expect full battery runtime capability during this initial charge period.1. Connect equipment to the outlets on the rear panel of the UPS.2. Connect the UPS to the building utility power. Connect the UPS to a two-pole, three-wire,grounded source only.3. Press the ON/OFF button on the front panel of the UPS to power the unit and all connectedequipment.4. To use the UPS as a master on/off switch, turn on all the equipment that is connected to the UPS.su0439aSee “Controllable Outlet Groups” on page 10 for information on how to use the ControllableOutlet Groups.Basic ConnectionsSerial port: Connect to a computer to use power management software.USB port: Connect to a computer to use power management software.External Battery Pack connector: Connect external battery packs to provideextended runtime during power outages. The UPS can support up to five externalbattery packs.4Smart-UPS X-Series Operation

TVSS Ground Screw: The UPS features a Transient Voltage Surge-Suppression(TVSS) screw for connecting the ground lead on surge suppression devices such asa telephone and network line protectors. When connecting a grounding cable,disconnect the UPS from utility power.Smart-UPS X-Series Operation5

Display PanelOverview Online indicator UPS Output On/Off button On Battery indicator Fault indicator Replace Battery indicator Display screen UP and DOWN buttons ENTER buttonsu0343a ESCAPE buttonAPC By SchneiderElectricUsing the display interfaceUse the UP and DOWN buttons to scroll through the main menu options. Press ENTER to view the submenus under each main menu option. Press ESCAPE to exit a sub-menu and return to a main menu.Standard menusThe Standard menus are the most commonly used menus for the UPS.6MenuGeneral FunctionsStatusView basic information about the UPS: Operating mode Switched Outlet status, On or Off Efficiency of the UPS Information about the load Battery capacity Estimated runtime Input and output voltage and frequency Information about the last transfer to battery power Self-test results SmartSlot Card informationConfigurationConfigure the settings for the UPS: Language Local power quality: Good, Fair, Poor Choose Standard or Advanced menus UPS Test settings Reset to Factory DefaultsTest & DiagsUse the Test & Diags menu to have the UPS perform aself-test.Smart-UPS X-Series Operation

MenuGeneral FunctionsAboutDisplay information about this unit: Unit model number Serial number Battery information Model number Installation date Suggested battery replacement date UPS firmware versionAdvanced menusThe Advanced menus provide additional options for the UPS and are available only if the displayinterface is configured to use the Advanced menus.MenuGeneral FunctionsStatusView detailed information about the UPS: Energy meter Load current Status of the SWITCHED OUTLET GROUP(S) Battery voltage EfficiencyConfigurationConfigure advanced settings for the UPS: MAIN AND SWITCHED OUTLET GROUPS—delaysand settings High and lower transfer points Sensitivity settings Date of last battery replacement Output voltage Battery settings Number of battery packs (not available on all models) Reset energy meter UPS test settingsControlControl the MAIN AND SWITCHED OUTLET GROUPSto turn on, turn off, shutdown, or reboot.Test & DiagsPerform UPS test and diagnostic functions such as userinterface testing, battery tests, and battery calibration.LogView the event and error logs for information about anychanges to the UPS and any faults.AboutView information about the unit: Hardware version Software version NMC information (if applicable) SmartSlot Card information (if applicable)Smart-UPS X-Series Operation7

ConfigurationUPS SettingsStart-up SettingsConfigure these settings at initial start-up, using the display interface or APC PowerChute software.Note: During start-up, use the display interface to configure these settings. If nothing isselected, the unit will use the default settings.FunctionFactory Default OptionsDescriptionLanguageEnglish English French* German* Spanish* Italian* Portuguese*The language for the display interface.Local Power GoodQuality Good Fair PoorSelect the quality of input utility power. If Good is selected, the unit will go on batterypower more often to provide the cleanest powersupply to the connected equipment. If Poor is selected, the UPS will tolerate morefluctuations in power and will go on battery powerless often.If unsure of the local power quality, select Good.Menu TypeStandard orAdvancedThe Standard menus display a limited set of menusand options. The Advanced menus include allparameters.Standard*Language options will vary by model.General SettingsConfigure these settings at any time, using the display interface or APC PowerChute software.FunctionFactory Default OptionsHigh transferpoint120 V: 140 VACLow TransferPoint8230 V: 280 VAC120 V: 85 VAC230 V: 170 VACDescription120 V: 140-150 VAC To avoid unnecessary battery usage, set the230 V: 280-300 VAC transfer point higher if the utility voltage ischronically high and the connected equipmentis known to work under this condition. ThePOWER QUALITY setting will automaticallychange this setting.Note: Use the Advanced Menus to configurethis setting.120 V: 75-85 VACSet the transfer point lower if the utility230 V: 150-170 VAC voltage is chronically low and the connectedequipment can tolerate this condition.Thissetting may also be adjusted using the powerquality setting.Note: Use the Advanced Menus to configurethis setting.Smart-UPS X-Series Operation

FunctionFactory Default OptionsDescriptionNominal Output 230 V: 230 VACVoltage120 V: 120 VAC230 V: 220, 230, 240 Set the nominal output voltage of the UPS onVACbattery. This is available on 230 V models120 V: N/Aonly.TransferSensitivityHigh, Low, MediumHighSelect the level of sensitivity to power eventsthat the UPS will tolerate. High: The UPS will go on battery powermore often to provide the cleanest powersupply to the connected equipment. Low: The UPS will tolerate morefluctuations in power and will go on batterypower less often.If the connected load is sensitive to powerdisturbances, set the sensitivity to High.Low BatteryWarning150 secDate of LastBatteryReplacementDate set at factory Reset this date when the battery module is replaced.Audible Alarm OnBattery SelfTest IntervalSettingSet the value insecondsOn/Off NeverOn start-up andevery 14 days since Start-up onlythe last test Frequency of test(days)Reset to Factory NoDefaultYes/NoThe UPS will emit an audible alarm when theremaining runtime has reached this level.The UPS will mute all audible alarms if this isset to Off or when the display buttons arepressed.The interval at which the UPS will execute aself-test.Restore the UPS factory default settings.Smart-UPS X-Series Operation9

Controllable Outlet GroupsOverviewThe rear panel of the UPS has multiple outlets, some are grouped into Controllable Outlet Groups, all ofthe other outlets are the UPS outlets, which function as an outlet group. All of these groups canindependently turn off, turn on, shut down, and reboot connected equipment.The Controllable Outlet Groups can be commanded to do the following: Turn off: Disconnect from power immediately and restart only with a manual command Turn on: Connect to power immediately Shutdown: Disconnect power in sequence, and automatically reapply power in sequence whenutility power becomes available Reboot: Shut down and restartIn addition, the Controllable Outlet Groups and the UPS outlets can be configured to do the following: Turn on or off in a specified sequence Automatically turn off or shut down when various conditions occurNote: If the Controllable Outlet Groups are not configured, all of the outlets on the unit willstill provide battery back-up power.Model-specific Controllable Outlet Groups Controllable Outlet Group(s) UPS outletssu0438asu0436a750VA, 120 V and 230 V.1000 VA, 120 V and 230 V.Using the Controllable Outlet Groups and UPS outletsThe UPS outlets function as a master switch. They turn on first when power is applied, shutoff last when there is a power outage and battery run-time has been exhausted.The UPS outlets must be turned on for the Controllable Outlet Groups to turn on.1. Connect critical equipment to the UPS outlets (The 1500 VA units do not have UPS outlets.10Smart-UPS X-Series Operation

su0437asu0435aSmart-UPS X-Series Operationsu0487asu0488a1500 VA, 120 V and 230 V.11

Connect all critical equipment to the same outlet group.)2. Connect peripheral equipment to the Controllable Outlet Groups.– Nonessential equipment that should shut off quickly in the event of a power outage toconserve battery runtime can be added to a short power-off delay– If equipment has dependent peripherals that must restart or shut down in a specific order, suchas an ethernet switch that must restart before a connected server, connect the devices toseparate groups– Equipment that needs to reboot independently from other equipment should be added to aseparate group3. Use the Configuration menus to configure how the Controllable Outlet Groups will react in theevent of a power outage.Customize the Controllable Outlet Groups and the UPS outletsUse the Control menus to change the Controllable Outlet Groups and the UPS outlet settings.FunctionFactory Default OptionsName StringOutlet GroupOutlet Group 1UPS Name String UPS OutletsEdit these names using an external interface, such as the NetworkManagement Card Web interface.Turn On Delay0 secSet the value insecondsThe amount of time the UPS or ControllableOutlet Group will wait between receiving thecommand to turn on and the actual startup.Turn Off Delay0 secSet the value insecondsThe amount of time that the UPS orControllable Outlet Group will wait betweenreceiving the command to turn off and theactual shut down.Reboot Duration 4 secSet the value insecondsThe amount of time that the UPS orControllable Outlet Group must remain offbefore it will restart.Minimum Return 0 secTimeSet the value insecondsThe amount of battery runtime that must beavailable before the UPS or ControllableOutlet Group will turn on.Load Shed OnBattery Shutdown withDelay Shutdownimmediately Turn offimmediately Turn off withdelay DisabledWhen the unit switches to battery power, theUPS can disconnect power to the ControllableOutlet Groups to save runtime.Set the value insecondsThe amount of time the outlets will function onbattery power before they will turn off.DisabledLoad Shed Time Disabledwhen On Battery12DescriptionConfigure this delay time, use the LOAD SHEDTIME WHEN ON BATTERY setting.Smart-UPS X-Series Operation

FunctionFactory Default OptionsDescriptionLoad Shed OnRuntimeDisabledWhen the battery runtime falls below thespecified value, the Controllable Outlet Groupwill turn off. Shutdown withdelay Shutdownimmediately Turn offimmediately Turn off withdelay DisabledConfigure this time using the LOAD SHEDRUNTIME REMAINING setting.Load Shed OnRuntimeRemainingDisabledSet the value insecondsWhen the remaining runtime reaches this level,the Controllable Outlet Group will turn off.Load Shed onOverloadDisabled Disabled EnabledIn the event of an overload (greater than 100%output), the Controllable Outlet Group willimmediately turn off to conserve power forcritical loads. The Controllable Outlet Groupwill only turn on again with a manualcommand.Network Management Card SettingsThese settings are available only on units that have a Network Management Card (NMC) and are set inthe factory. These settings can only be modified using an external interface, like the NMC web interface. NMC IP Address Mode NMC IP Address NMC Subnet Mask NMC Default GatewaySmart-UPS X-Series Operation13

Emergency Power OffOverviewThe Emergency Power Off (EPO) option is a safety feature that will immediately disconnect allconnected equipment from utility power. The UPS will immediately shut down and will not switch tobattery power.Connect each UPS to the EPO switch, even if the UPS units are used in parallel.The UPS must be restarted for power to return to connected equipment. Press the ON/OFF button on thefront panel of the UPS.1. If the EPO switch or relay contacts are normally open, insert the wiresfrom the switch or contacts at pins 1 and 2 of the EPO terminal block.Use 16-28 AWG wire.gen0887aNormally open contacts2. Secure the wires by tightening the screws.If the contacts are closed, the UPS will turn OFF and power will be removed from the load.1. If the EPO switch or relay contacts are normally closed, insert the wiresfrom the switch or contacts at pins 2 and 3 of the EPO terminal block.Use 16-28 AWG wire.gen0888aNormally closed contacts2. Insert a wire jumper between pins 1 and 2. Secure the wires bytightening the three screws at positions 1, 2, and 3.If the contacts are opened, the UPS will turn OFF and power will be removed from the load.Note: Pin 1 is the power source for the EPO circuit, it provides a few milliampere of 24 V power.If the normally closed (NC) EPO configuration is used, the EPO switch or relay should be rated for “dry”circuit applications, the rating should be for low voltage and low current applications. This normallyimplies the contacts are gold-plated.Adhere to all national and local electrical codes when wiring the EPO. Wiring must be performedby a qualified electrician.The EPO interface is a Safety Extra Low Voltage (SELV) circuit. Connect the EPO interface only toother SELV circuits. The EPO interface monitors circuits that have no determined voltage potential.SELV circuits are controlled by a switch or relay properly isolated from utility power. To avoid damageto the UPS, do not connect the EPO interface to any circuit other than a SELV circuit.Use one of the following cable types to connect the UPS to the EPO switch. CL2: Class 2 cable for general use. CL2P: Plenum cable for use in ducts, plenums, and other spaces used for environmental air. CL2R: Riser cable for use in a vertical run in a floor-to-floor shaft. CLEX: Limited use cable for use in dwellings and for use in raceways. Installation in Canada: Use only CSA certified, type ELC, (extra-low voltage control cable). Installation in countries other than Canada and the USA: Use standard low-voltage cable in14Smart-UPS X-Series Operation

accordance with national and local regulations.TroubleshootingProblem and Possible CauseSolutionThe UPS will not turn on or there is no outputThe unit has not been turned on.Press the ON button once to turn on the UPS.The UPS is not connected to utilitypower.Be sure that the power cable is securely connected to the unit and to the utilitypower supply.The input circuit breaker has tripped.Reduce the load to the UPS, disconnect nonessential equipment and reset thecircuit breaker.The unit shows very low or no inpututility voltage.Check the utility power supply to the UPS by plugging in a table lamp. If thelight is very dim, check the utility voltage.The battery connector plug is notsecurely connected.Be sure that all battery connections are secure.There is an internal UPS fault.Do not attempt to use the UPS. Unplug the UPS and have it servicedimmediately.The UPS is operating on battery, while connected to input utility powerThe input circuit breaker has tripped.Reduce the load to the UPS, disconnect nonessential equipment and reset thecircuit breaker.There is very high, very low, ordistorted input line voltage.Move the UPS to a different outlet on a different circuit. Test the input voltagewith the utility voltage display. If acceptable to the connected equipment,reduce the UPS sensitivity.UPS is emitting an audible beeping soundThe UPS is in normal operation.None. The UPS is protecting the connected equipment.UPS does not provide expected backup timeThe UPS battery is weak due to arecent outage or is near the endof its service life.Charge the battery. Batteries require recharging after extended outages andwear out faster when put into service often or when operated at elevatedtemperatures. If the battery is near the end of its service life, considerreplacing the battery even if the replace battery indicator is not yetilluminated.The UPS is overloaded.Check the UPS load display. Unplug unnecessary equipment, such as printers.Display interface indicators flash sequentiallyThe UPS has been shut down remotelyNone. The UPS will restart automatically when utility power is restored.through software or an optional accessorycard.The Fault indicator is lit and the UPS displays a fault message and emits a constant beeping soundInternal UPS fault.Do not attempt to use the UPS. Turn the UPS off and have it servicedimmediately.Smart-UPS X-Series Operation15

Problem and Possible CauseSolutionAll indicators are illuminated and the UPS is plugged into a wall outletThe UPS has shut down and thebattery has discharged from anextended outage.None. The UPS will return to normal operation when the power is restoredand the battery has a sufficient charge.The replace battery indicator is illuminatedThe battery has a weak charge.Allow the battery to recharge for at least four hours. Then, perform a self-test.If the problem persists after recharging, replace the battery.The replacement battery is notproperly connected.Be sure that the battery connector is securely connected.The display interface has a Site Wiring Fault messageWiring faults detected includemissing ground, hot-neutral,polarity reversal, and overloadedneutral circuit.If the UPS indicates a site wiring fault, have a qualified electrician inspect thebuilding wiring. (Applicable for 120 V units only.)

Service and SupportServiceIf the unit requires service, do not return it to the dealer. Follow these steps:1. Review the Troubleshooting section of the manual to eliminate common problems.2. If the problem persists, contact APC Customer Support through the APC Web site,www.apc.com.a. Note the model number and serial number and the date of purchase. The model and serial numbers are locatedon the rear panel of the unit and are available through the LCD display on select models.b. Call APC Customer Support and a technician will attempt to solve the problem over the phone. If this is notpossible, the technician will issue a Returned Material Authorization Number (RMA#).c. If the unit is under warranty, the repairs are free.d. Service procedures and returns may vary internationally. Refer to the APC Web site for country specificinstructions.3. Pack the unit properly to avoid damage in transit. Never use foam beads for packaging. Damagesustained in transit is not covered under warranty.a. For the UPS, always DISCONNECT THE BATTERY before shipping in compliance with U.S.Department of Transportation (DOT) and IATA regulations. The battery may remain in the unit.b. Internal batteries may remain connected in the XLBP during shipment, (if applicable, not all units haveXLBPs).4. Write the RMA# provided by Customer Support on the outside of the package.5. Return the unit by insured, pre-paid carrier to the address provided by Customer Support.Transport the unit1. Shut down and disconnect all connected equipment.2. Disconnect the unit from utility power.3. Disconnect all internal and external batteries (if applicable).4. Follow the shipping instructions outlined in the Service section of this manual.Smart-UPS X-Series Operation17

APC Worldwide Customer SupportCustomer support for this or any other APC product is available at no charge in any of the following ways: Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer supportrequests.– www.apc.com (Corporate Headquarters)Connect to localized APC Web sites for specific countries, each of which provides customer supportinformation.– www.apc.com/support/Global support searching APC Knowledge Base and using e-support. Contact the APC Customer Support Center by telephone or e-mail.– Local, country-specific centers: go to www.apc.com/support/contact for contact information.For information on how to obtain local customer support, contact the APC representative or other distributorsfrom whom you purchased your APC product.18Smart-UPS X-Series Operation

Smart-UPS Factory WarrantyLIMITED WARRANTYAmerican Power Conversion (APC) warrants its Smart-UPS (Products) to be free from defects in materials and workmanshipfor a period of three (3) years, excluding the batteries, which are warranted for two (2) years from date of purchase. APC'sobligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. Repair orreplacement of a defective Product or part thereof does not extend the original warranty period.This warranty applies only to the original purchaser who must have properly registered the Product within 10 days of purchase.Products may be registered online at warranty.apc.com.APC shall not be liable under this warranty if its testing and examination disclose that the alleged defect in the Product does notexist or that it was caused by end user's or any third person's misuse, negligence, improper installation, testing, operation or useof the Product contrary to APC's recommendations or specifications. Further, APC shall not be liable for defects resulting from:1) unauthorized attempts to repair or modify the Product, 2) incorrect or inadequate electrical voltage or connection, 3)inappropriate on-site operation conditions, 4) Acts of God, 5) exposure to the elements, or 6) theft. In no event shall APC haveany liability under this warranty for any Product where the serial number has been altered, defaced, or removed.EXCEPT AS SET FORTH ABOVE, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, BY OPERATION OF LAWOR OTHERWISE, APPLCIABLE TO PRODUCTS SOLD, SERVICED OR FURNISHED UNDER THIS AGREEMENT ORIN CONNECTION HEREWITH.APC DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTION AND FITNESS FOR APARTICULAR PURPOSE.APC EXPRESS WARRANTIES WILL NOT BE ENLARGED, DIMINISHED, OR AFFECTED BY AND NO OBLIGATIONOR LIABILITY WILL ARISE OUT OF, APC's RENDERING OF TECHNICAL OR OTHER ADVICE OR SERVICE INCONNECTION WITH THE PRODUCTS.THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIESAND REMEDIES. THE WARRANTIES SET FORTH ABOVE CONSTITUTE APC'S SOLE LIABILITY ANDPURCHASER'S EXCLUSIVE REMEDY FOR ANY BREACH OF SUCH WARRANTIES. APC'S WARRANTIES RUNONLY TO ORIGINAL PURCHASER AND ARE NOT EXTENDED TO ANY THIRD PARTIES.IN NO EVENT SHALL APC, ITS OFFICERS, DIRECTORS, AFFILIATES OR EMPLOYEES BE LIABLE FOR ANYFORM OF INDIRECT, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, ARISING OUT OF THE USE,SERVICE OR INSTALLATION, OF THE PRODUCTS, WHETHER SUCH DAMAGES ARISE IN CONTRACT OR TORT,IRRESPECTIVE OF FAULT, NEGLIGENCE OR STRICT LIABILITY OR WHETHER APC HAS BEEN ADVISED INADVANCE OF THE POSSIBILITY OF SUCH DAMAGES. SPECIFICALLY, APC IS NOT LIABLE FOR ANY COSTS,SUCH AS LOST PROFITS OR REVENUE (WHETHER DIRECT OR INDIRECT), LOSS OF EQUIPMENT, LOSS OF USEOF EQUIPMENT, LOSS OF SOFTWARE, LOSS OF DATA, COSTS OF SUBSTITUANTS, CLAIMS BY THIRD PARTIES

The APC by Schneider Electric Smart-UPS . Card (NMC). The user manual is also available on the APC Web site at www.apc.com. External Battery Pack For installation information, see the Smart-UPS X-Series External Battery Pack Installation . Operating 3,000 m (10,000 ft) Storage 15,000 m (50,000 ft) Humidity 0% to 95% relative humidity, .