mopdf.com

ChicagoTM Grips1628 Series Round jaws are shaped to provide maximum contactwith the cable, virtually eliminating cable deformation.In some transmission applications – commonly using the 1628-30, 1628-40 or 1628-50 series Chicago Grips – there is arisk of cable deformation under high tensions. To avoid this risk, Klein Tools recommends using two grips in tandem if the loadis expected to exceed the lesser of 12,500 lbs. (5670 kg) or 40% of the ACSR conductor's tensile strength.1628-40TRANSMISSIONACSR TRANSMISSION CABLES1628-50These grips are special order only. Application must beconfirmed prior to ordering. Allow 30 days for delivery.Cat. No.Min. to Max. CableDiameter inches (mm)JawLengthApprox.Weight Each20,000 lbs. (9,072 kg) Maximum Safe Load1628-30P1628-30R1628-30S1628-30T1628-30U.95" - 1.02" (24.23 mm - 25.78 mm)1.02" - 1.08" (25.81 mm - 27.38 mm)1.08" - 1.14" (27.41 mm - 28.96 mm)1.14" - 1.20" (28.98 mm -30.56 mm)1.21" - 1.26" (30.59 mm - 32.13 mm)10-3/4"(273 mm)27 lbs.(12.27 kg)10-3/4"(273 mm)34 lbs.(15.45 kg)25,000 lbs. (11,340 kg) Maximum Safe Load1628-40W1628-40X1628-40Y1628-40Z1.27" - 1.33" (32.16 mm - 33.73 mm)1.33" - 1.39" (33.76 mm - 35.30 mm)1.39" - 1.45" (35.33 mm - 36.91 mm)1.45" - 1.52" (36.93 mm - 38.48 mm) 1628-50 equipped withremovable bolt on floatingjaw, secured by a slotted nutand cotter pin. Jaw providesincreased cable coverage.Note: Jaw must be removed toinsert cable for model 1628-50.25,000 lbs. (11,340 kg) Maximum Safe Load with bolt on F1.52" - 1.58" (38.51 mm - 40.08 mm)1.58" - 1.64" (40.11 mm - 41.66 mm)1.64" - 1.70" (41.68 mm - 43.26 mm)1.70" - 1.77" (43.28 mm - 44.83 mm)1.77" - 1.83" (44.86 mm - 46.43 mm)1.83" - 1.89" (46.46 mm - 48.00 mm)10-3/4"(273 mm)34 lbs.(15.45 kg)7www.kleintools.comAll dimensions are in inches (millimeters).See Wire Pulling Grip Warnings on the inside cover.

Z1628-40A1628-50B1628-50D1628-50ESafe Load(9,072 kg).963" (24.46 mm).964" (24.49 mm).973" (24.71 mm).975" (24.77 mm).998" (25.35 mm).997" (25.32 mm)1.026" (26.06 mm)1.027" (26.09 mm)1.029" (26.14 mm)1.031" (26.19 mm)1.076" (27.37 mm)1.077" (27.36 mm)1.092" (27.74 mm)1.124" (28.55 mm)1.125" (28.58 mm)1.151" (29.24 mm)1.152" (29.26 mm)1.170" (29.72 mm)1.171" (29.74 mm)1.216" (30.89 mm)1.258" (31.95 mm)1.300" (33.02 mm)1.340" (34.04 mm)1.378" (35.00 mm)1.416" (35.97 mm)1.453" (36.91 mm)1.524" (38.71 mm)1.631" (41.43 mm)1.729" (43.92 mm)1.823" (46.30 mm)Grip(11,340 kg)700 MCM700 MCM715.5 MCM715.5 MCM750 MCM750 MCM795 MCM795 MCM800 MCM800 MCM874.5 MCM874.5 MCM900 MCM954 MCM954 MCM1000 MCM1000 MCM1033.5 MCM1033.5 MCM1113 MCM1192.5 MCM1272.MCM1351.5 MCM1431 MCM1510.5 MCM1590 MCM1750 MCM2000 MCM2250 MCM2500 MCMNo. of Alum. Strands Code Word20,000 lbs.AWG or MCM Size Diameter inches (mm)25,000 lbs.TRANSMISSIONAAC (All Aluminum Conductor)8All dimensions are in inches (millimeters).www.kleintools.comSee Wire Pulling Grip Warnings on the inside cover.

ChicagoTM Grips1628 Series Round jaws are shaped to provide maximum contactwith the cable, virtually eliminating cable deformation.In some transmission applications – commonly using the 1628-30, 1628-40 or 1628-50 series Chicago Grips – there is arisk of cable deformation under high tensions. To avoid this risk, Klein Tools recommends using two grips in tandem if the load isexpected to exceed the lesser of 12,500 lbs. (5,670 kg) or 40% of the AAC conductor's tensile strength.1628-40TRANSMISSIONAAC TRANSMISSION CABLES1628-50These grips are special order only. Application must beconfirmed prior to ordering. Allow 30 days for delivery.Cat. No.Min. to Max. CableDiameter inches (mm)JawLengthApprox.Weight Each20,000 lbs. (9,072 kg) Maximum Safe Load1628-30P1628-30R1628-30S1628-30T1628-30U.95" - 1.02" (24.23 mm - 25.78 mm)1.02" - 1.08" (25.81 mm - 27.38 mm)1.08" - 1.14" (27.41 mm - 28.96 mm)1.14" - 1.20" (28.98 mm -30.56 mm)1.21" - 1.26" (30.59 mm - 32.13 mm) 1628-50 equipped with10-3/4"(273 mm)27 lbs.(12.27 kg)25,000 lbs. (11,340 kg) Maximum Safe 0A1.20" - 1.27" (30.58 mm - 32.13 mm)1.27" - 1.33" (32.16 mm - 33.73 mm)1.33" - 1.39" (33.76 mm - 35.30 mm)1.39" - 1.45" (35.33 mm - 36.91 mm)1.45" - 1.52" (36.93 mm - 38.48 mm)1.52" - 1.58" (38.51 mm - 40.08 mm)removable bolt on floatingjaw, secured by a slotted nutand cotter pin. Jaw providesincreased cable coverage.Note: Jaw must be removed toinsert cable for model 1628-50.10-3/4"(273 mm)34 lbs.(15.45 kg)25,000 lbs. (11,340 kg) Maximum Safe Load with bolt on jaw1628-50B1628-50D1628-50E1.58" - 1.64" (40.11 mm - 41.66 mm)1.70" - 1.77" (43.28 mm - 44.83 mm)1.77" - 1.83" (44.86 mm - 46.43 mm)10-3/4"(273 mm)34 lbs.(15.45 kg)9www.kleintools.comAll dimensions are in inches (millimeters).See Wire Pulling Grip Warnings on the inside cover.

10Grip266.8 MCM266.8 MCM300 MCM336.4 MCM336.4 MCM397.5 MCM397.5 MCM397.5 MCM477 MCM477 MCM477 MCM556.5 MCM556.5 MCM556.5 MCM605 MCM605 MCM605 MCM636 MCM636 MCM636 MCM636 MCM666.6 MCM666.6 MCM715.5 MCM715.5 MCM795 MCM795 MCM795 MCM795 MCM795 MCM900 MCM900 MCM954 MCM954 MCM954 MCM954 MCM954 MCM954 MCM1033.5 MCM1033.5 MCM1113 MCM1113 MCM1192.5 MCM1192.5 MCM1272 MCM1272 MCM1351 MCM1351 MCM1431 MCM1431 MCM1590 MCM1590 MCM1780 MCM2034.5 MCM2167 MCM2156 MCM2312 MCM2515 MCM.642" (16.31 mm).660" (16.76 mm).680" (17.27 mm).720" (18.29 mm).741" (18.82 mm).772" (19.61 mm).783" (19.89 mm).806" (20.47 mm).846" (21.49 mm).858" (21.79 mm).883" (22.43 mm).914" (23.22 mm).927" (23.55 mm).953" (24.21 mm).953" (24.21 mm).994" (25.25 mm).994" (25.25 mm).977" (24.82 mm).991" (25.17 mm)1.019" (25.88 mm)1.019" (25.88 mm)1.000" (25.40 mm)1.014" (25.76 mm)1.051" (26.70 mm)1.081" (27.46 mm)1.063" (27.00 mm)1.092" (27.74 mm)1.092" (27.74 mm)1.107" (28.12 mm)1.139" (28.93 mm)1.131" (28.73 mm)1.162" (29.52 mm)1.165" (29.59 mm)1.165" (29.59 mm)1.175" (29.85 mm)1.196" (30.38 mm)1.196" (30.38 mm)1.248" (31.70 mm)1.212" (30.79 mm)1.245" (31.62 mm)1.258" (31.95 mm)1.292" (32.82 mm)1.302" (33.07 mm)1.337" (33.99 mm)1.345" (34.16 mm)1.381" (35.08 mm)1.386" (35.21 mm)1.424" (36.17 mm)1.427" (36.25 mm)1.465" (37.21 mm)1.504" (38.20 mm)1.544" (39.22 mm)1.601" (40.67 mm)1.681" (42.70 mm)1.735" (44.12 mm)1.762" (44.76 mm)1.802" (45.77 mm)1.880" (47.75 Peacock/ACSSWood 6x19Safe Load(3,629 kg)Code Word(11,340 kg)Diameter inches (mm) No. of Alum. & Steel Strands8,000 lbs.AWG or MCM Size25,000 lbs.TRANSMISSIONACSS (Aluminum Conductor Steel Supported)*Must use two of recommended grips in tandem. See grip use instructions on pages 16-17.All dimensions are in inches (millimeters).www.kleintools.comSee Wire Pulling Grip Warnings on the inside cover.

TRANSMISSIONACSS TRANSMISSION CABLESChicagoTM Grips1628 Series Round jaws are shaped to provide maximum contactwith the cable, virtually eliminating cable deformation.Best Practices for ACSS Conductors1. Larger than 0.953" outside diameter (approximately600 MCM) - Use the 1628-50 or 1628-40 seriesChicago Grips. The necessary grip size should bedetermined based on the cable outside diameter.For applications where the load is expected to exceed10,000 lbs. (4,536 kg), use two of the appropriategrips in tandem to prevent cable deformation. Seeinstructions for using two grips in tandem on page 17.1628-402. Smaller than 0.953" outside diameter (approximately600 MCM) - Use two of the appropriate 1656 seriesChicago Grips in tandem. The necessary grip sizeshould be determined based on the cable outsidediameter. See instructions for using two gripsin tandem on page 17.3. F or grip recommendations, contact usat [email protected]. No.Hot LatchModel No.Hot Latch/SpringModel No.1628-50Min. to Max. CableDiameter inches (mm)JawLengthApprox.Weight Each8,000 lbs. (3,629 kg) Maximum Safe 1656-40HS1656-50HS1656-60H.53" - .74" (13.46 mm - 18.79 mm).74" - .86" (18.80 mm - 21.84 mm).86" - .96" (21.84 mm - 24.38 mm)5-1/2"(140 mm)8.30 lbs.(3.76 kg)25,000 lbs. (11,340 kg) Maximum Safe Load with bolt on B*1628-50C*1628-50D*1628-50E*1628-50F*NANA.95" - 1.02" (24.23 mm - 25.78 mm)1.02" - 1.08" (25.81 mm -27.38 mm)1.08" - 1.14" (27.41 mm - 28.96 mm)1.14" - 1.20" (28.99 mm - 30.55 mm)1.20" - 1.27" (30.58 mm - 32.13 mm)1.27" - 1.33" (32.16 mm - 33.73 mm)1.33" - 1.39" (33.76 mm - 35.30 mm)1.39" - 1.45" (35.33 mm - 36.91 mm)1.45" - 1.52" (36.93 mm - 38.48 mm)1.52" - 1.58" (38.51 mm - 40.08 mm)1.58" - 1.64" (40.11 mm - 41.66 mm)1.64" - 1.70" (41.68 mm - 43.26 mm)1.70" - 1.77" (43.28 mm - 44.83 mm)1.77" - 1.83" (44.86 mm - 46.43 mm)1.83" - 1.89" (46.46 mm - 48.00 mm) 1628-50 equipped withremovable bolt on floatingjaw, secured by a slotted nutand cotter pin. Jaw providesincreased cable coverage.10-3/4"(273 mm)34 lbs.(15.45 kg)Note: Jaw must be removed toinsert cable for model 1628-50.11*These grips are special order only. Application must be confirmed prior to ordering. Allow 30 days for delivery.www.kleintools.comAll dimensions are in inches (millimeters).See Wire Pulling Grip Warnings on the inside cover.

0Z1628-50B1628-50B1628-50D.595" (15.11 mm).667" (16.94 mm).692" (17.58 mm).776" (19.71 mm).798" (20.27 mm).820" (20.83 mm).835" (21.21 mm).850" (21.59 mm).893" (22.68 mm).909" (23.09 mm).942" (23.93 mm).990" (25.15 mm).960" (24.38 mm).980" (24.89 mm).993" (25.22 mm)1.010" (25.65 mm)1.055" (26.80 mm)1.044" (26.52 mm)1.061" (26.95 mm)1.080" (27.43 mm)1.089" (27.66 mm)1.102" (27.99 mm)1.132" (28.75 mm)1.129" (28.68 mm)1.143" (29.03 mm)1.185" (30.10 mm)1.170" (29.72 mm)1.181" (29.99 mm)1.225" (31.12 mm)1.203" (30.56 mm)1.224" (31.09 mm)1.260" (32.01 mm)1.256" (31.90 mm)1.300" (33.02 mm)1.291" (32.79 mm)1.337" (33.96 mm)1.340" (34.04 mm)1.380" (35.02 mm)1.350" (34.29 mm)1.334" (33.88 mm)1.358" (34.49 mm)1.410" (35.81 mm)1.420" (36.07 mm)1.386" (35.20 mm)1.470" (37.34 mm)1.427" (36.25 mm)1.445" (36.70 mm)1.550" (39.37 mm)1.504" (38.20 mm)1.602" (40.69 mm)1.608" (40.84 mm)1.761" (44.73 mm)1.761" (44.73 rimack/ACSS/TWRio /TWJames/ACSS/TWPee S/TWSantee/ACSS/TW(3,629 kg)266.8 MCM336.4 MCM336.4 MCM477 MCM477 MCM477 MCM556.5 MCM556.5 MCM636 MCM636 MCM636 MCM762.8 MCM768.2 MCM795 MCM795 MCM795 MCM795 MCM900 MCM954 MCM954 MCM954 MCM1033.5 MCM1033.5 MCM1033.5 MCM1113 MCM1113 MCM1113 MCM1192.5 MCM1192.5 MCM1192.5 MCM1272 MCM1272 MCM1272 MCM1351.5 MCM1351.5 MCM1431 MCM1431 MCM1433.6 MCM1533.3 MCM1557.4 MCM1569 MCM1590 MCM1590 MCM1622 MCM1657.4 MCM1730.6 MCM1758.6 MCM1780 MCM1926.9 MCM1949.6 MCM2153.8 MCM2156 MCM2627.3 MCMSafe Load(11,340 kg)Grip8,000 lbs.AWG or MCM Size Diameter inches (mm) No. of Alum. & Steel Strands Code Word25,000 lbs.TRANSMISSIONACSS/TW (Trapezoidal Wire)*Must use two of recommended grips in tandem. See grip use instructions on pages 16-17.www.kleintools.comAll dimensions are in inches (millimeters).See Wire Pulling Grip Warnings on the inside cover.

TRANSMISSIONACSS/TW TRANSMISSION CABLESChicagoTM Grips1628 Series Round jaws are shaped to provide maximum contactwith the cable, virtually eliminating cable deformation.Best Practices for ACSS/TW Conductors1. Larger than 0.953" outside diameter (approximately600 MCM) - Use the 1628-50 or 1628-40 seriesChicago Grips. The necessary grip size should bedetermined based on the cable outside diameter.For applications where the load is expected to exceed10,000 lbs. (4,536 kg), use two of the appropriategrips in tandem to prevent cable deformation. Seeinstructions for using two grips in tandem on page 17.1628-402. Smaller than 0.953" outside diameter (approximately600 MCM) - Use two of the appropriate 1656 seriesChicago Grips in tandem. The necessary grip sizeshould be determined based on the cable outsidediameter. See instructions for using two gripsin tandem on page 17.3. F or grip recommendations, contact usat [email protected]. No.Hot LatchModel No.Hot Latch/Spring Min. to Max. CableModel No.Diameter inches (mm)JawLengthApprox.Weight Each5-1/2"(140 mm)8.30 lbs.(3.76 kg)8,000 lbs. (3,629 kg) Maximum Safe 1656-40HS1656-50HS1656-60H.53" - .74" (13.46 mm - 18.79 mm).74" - .86" (18.80 mm - 21.84 mm).86" - .96" (21.84 mm - 24.38 mm)25,000 lbs. (11,340 kg) Maximum Safe Load with bolt on B*1628-50C*1628-50D*NANA.95" - 1.02" (24.23 mm - 25.78 mm)1.02" - 1.08" (25.81 mm -27.38 mm)1.08" - 1.14" (27.41 mm - 28.96 mm)1.14" - 1.20" (28.99 mm - 30.55 mm)1.20" - 1.27" (30.58 mm - 32.13 mm)1.27" - 1.33" (32.16 mm - 33.73 mm)1.33" - 1.39" (33.76 mm - 35.30 mm)1.39" - 1.45" (35.33 mm - 36.91 mm)1.45" - 1.52" (36.93 mm - 38.48 mm)1.52" - 1.58" (38.51 mm - 40.08 mm)1.58" - 1.64" (40.11 mm - 41.66 mm)1.64" - 1.70" (41.68 mm - 43.26 mm)1.70" - 1.77" (43.28 mm - 44.83 mm) 1628-50 equipped withremovable bolt on floatingjaw, secured by a slotted nutand cotter pin. Jaw providesincreased cable coverage.10-3/4"(273 mm)34 lbs.(15.45 kg)Note: Jaw must be removed toinsert cable for model 1628-50.13*These grips are special order only. Application must be confirmed prior to ordering. Allow 30 days for delivery.www.kleintools.comAll dimensions are in inches (millimeters).See Wire Pulling Grip Warnings on the inside cover.

RELATEDPRODUCTSDISTRIBUTIONWeb Strap Ratchet Hoists Large, non-conductive drum knob allows web slackto be adjusted with ease. 3/4 ton single line and 1-1/2 ton double line load rating. Tight ratcheting mechanism allows precise tensioning. Meets ANSI/ASME B30.21-2005 & B30.10-2009 standards. Hot rings for hot stick use (Cat No. KN1500P-EXH only).Cat. No.Pull TypeWeight (lbs.)KN1500P-EXKN1500P-EXHSingle/ DoubleSingle/ Double12.5 lbs (5.7 kg)13.6 lbs (6.2 kg)Single LineLoad Rating: 1500 lbs. (675 kg)Min. to Max. Pulling Distance: 20" - 138" (500 mm - 3500 mm)Hot rings forhot stick use.KN1500P-EXKN1500P-EXHDouble LineLoad Rating: 3000 lbs. (1,350 kg)Min. to Max. Pulling Distance: 26" - 79" (700 mm - 2000 mm)Howe Wire Tool Strap is made of tough Klein-KordTM. Swivel hook is forged steel with large opening. Shank of hook is lengthened to reach under insulator. Other end has device to hold the load at any distance. All metal parts are galvanized. Max. safe load 500 lbs. (225 kg).Cat. No.DescriptionWeight (lbs.)1702-20NNylon Strap 1" (25 mm) wide, 7' (2.1 m) long1.95 lbs. (0.9 kg)1702-20NGrip-Cleaning Brush Set Set of four wire-bristle brushes designed forcleaning Klein wire and cable-pulling grips. B rushes have stiff wire bristles. Available in round and square shapes and two lengths for efficient cleaning of different jaw configurations.Semi-flexible steel shafts set into comfortable woodenhandles provide the necessary reach into grip jaws.Cat. No.2545014Set Contains25450Weight (lbs.)1.00 lbs. (0.45 kg)DescriptionBristle Diameterand d-bristlesquare-bristle3/8" x 3"(10 mm x 76 mm)12"(305 mm)14"(356 mm)1-9/16" x 5"(40 mm x 127 mm)All dimensions are in inches .comSee Wire Pulling Grip Warnings on the inside cover.

The following guidelines have been established to keep all grips in good working condition.Cleaning12Step 1. Use the Klein Grip CleaningWire Brush Set (Cat. No. 25450) oremery cloth to clean the surfaces of gripjaws (photo #1).3Step 3. Use the Klein GripCleaning Wire Brush to remove dirt anddebris from the grip jaws (photo #3).Step 2.Spray de greaser on the grip jaws, alljoints and moving parts (photo #2).4RECOMMENDED CAREDISTRIBUTIONGrip Cleaning, Lubricating and InspectingStep 4. Wipe grips dry with soft cloth.Repeat all cleaning steps as necessaryuntil grip is completely clean (photo #4).LubricatingStep 5.5Apply lubricant to all joints andmoving parts. Do NOT lubricategripping surfaces of jaws(photos left #5).SideplatesJawsclosedBodyJawsStep 6.Carefully inspect jaw condition, proper alignment of jawsand all parts, and possible distortion caused by exceeding safe-loadspecifications. Grips should operate smoothly. Spring-loaded gripsshould lock open with loop handle in “Down" position and should closeautomatically with loop handle “Up." The Klein Parallel Jaw Grip may betested by opening and closing the jaws by hand, exercising proper caution.All parts and rivets should be checked for distortion (illustration #6).LoophandleTo lockopen6Never repair any grip. Grips that are bent, misaligned or otherwise distorted s

Grip Recommendation. Klein Tools offers a free service of recommending the proper grip for a particular application based on a sample of cable. All that is reuired is a minimum 6-9 (2-3 meters) length of cable. If there is ever a uestion about the safe condition of any grip, contact Customer Service at . or . or email HiSupportkleintools.com.