Transcription
A Reference Guide to DEUTSCH Industrial Electrical Connectors and AccessoriesD I S T R I B U T I O Na TE Connectivity Company
D I S T R I B U T I O Na TE Connectivity CompanyLADD specializes in the sales, marketing, distribution, and technical support for TE Connectivity’s DEUTSCHindustrial electrical connectors and accessories.LADD is more than just a distributor. We haven’t forgotten the importance of personal service. The Customer Service department can assist you with technical answers, pricing, orders, and more.US & CanadaLADD DistributionContact our Customer Serviceat 800-223-1236.Visit us on the web atwww.laddinc.com.Contact us by fax at937-438-9755.Contact us by email [email protected]@te.com.Additional LADD Distribution Locations:ChinaLADD DistributionEMEALADD DistributionJapanLADD DistributionDeutsch Connectors Trading(Shanghai) Co., Ltd.Rm #1032, 10F Central Plaza381 Huai Hai Zhong RoadShanghai 200020, ChinaPhone: 86 21 66082211Email: [email protected] Electronics AMP GmbHFraunhoferstr. 11b82152 Martinsried, GermanyPhone: 49 89 899157-0Fax: 49 89 8574684Email: [email protected] Japan Limited4-3-28 NishidaiItabashi-ku, Tokyo 175-0045JapanPhone: 81-3-5922-1345Email: [email protected] information including drawings, technical specifications, and an interactiveproduct finder is available online at www.laddinc.com.
A supplement to the DEUTSCHindustrial product catalogTable of Contents2DEUTSCH Performance Specifications3Connector Series Overview6Electrical Connectors5457Features of DEUTSCH Connector SeriesEnvironmentally Sealed Connectors, 1-128 CavitiesSecondary WedgelocksWedgelocks Required for Connector SeriesConnector AccessoriesEnclosures, Backshells, Boots, Dust Covers, Strain Relief, SealingPlugs, Removal Tools, Mounting Accessories, Replacement Components71Contacts75Crimp Tooling-Solid Contacts76LADD DistributionGeneral Technical Specifications of DEUTSCH Industrial ConnectorsSolid and Stamped & Formed Pins and SocketsProduction/Hand Crimp Tools for Solid ContactsCrimp Tooling-Stamped & Formed ContactsProduction/Hand Crimp Tools for Stamped & Formed Contacts, DieReplacement Components80DEUTSCH Modification List86GlossaryCommon DEUTSCH Industrial Connector ModificationsCommon Terms and Definitions1Table of Contents
Performance SpecificationsDEUTSCH Performance SpecificationsDielectric WithstandingVoltageCurrent leakage less than 2 milliamps at 1500 VAC.DurabilityNo electrical or mechanical defects after 100 cycles of engagement or disengagement.Fluid ResistanceConnectors show no damage when exposed to most fluids used in industrial applications.Insulation Resistance1000 megohms minimum at 25 C.Moisture ResistanceProperly wired and mated connections will withstand immersion under three feet of water withoutloss of electronic qualities or leakage.WT Series withstands immersion under four feet of water.IMC Series and Quick Connect Series are rated IP68.Physical ShockNo unlocking, unmating, or other unsatisfactory result during or after 50 G’s in each of threemutually perpendicular planes. No electrical discontinuities longer than 1 microsecond.MIL-STD 202, Method 213, Condition “C”.TemperatureOperating at temperatures from -55 C to 125 C continuous at rated current.DTMH Series and Quick Connect Series: -55 C to 150 C.IMC Series and WT Series: -55 C to 175 C.Thermal CycleNo cracking, chipping, or leaking after 20 test cycles from -55 C to 125 C.VibrationNo unlocking or unmating and exhibits no mechanical or physical damage after sinusoidalvibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. Noelectrical discontinuities longer than 1 microsecond.VoltageUp to 1000 VAC (rms)IMC Series and Quick Connect Series only.Contact RetentionContacts withstand a minimum load of:Contact SizeLoadØ12mm56 lbs.Ø8mm56 lbs.435 lbs.835 lbs.1230 lbs.1625 lbs.2020 lbs.Contact Current Rating @125 C (continuous)Contact SizeMax. CurrentØ12mmØ8mm48121620300 amps*150 amps*100 amps60 amps25 amps13 amps7.5 amps*Max current is achieved when using max wire gauge onlyContact Millivolt DropWire AWG48121620Test Current100 amps60 amps25 amps13 amps7.5 ampsMillivolt Drop* Solids6060606060Millivolt Drop* S&FN/AN/A100100100*Less drop through wireCrimp Tensile StrengthContact SizeØ12mmØ8mm48121620DEUTSCH Performance SpecificationsTensile Strength Solids639-898 lbs.367-598 lbs.300 lbs.90 lbs.70 lbs.25 lbs.20 lbs.2Tensile Strength S&FN/AN/AN/AN/A70 lbs25 lbs.20 lbs.LADD Distribution
Connector Series Overview Accepts contact size 16 (13 amps)14-20 AWG40 cavity arrangementIn-line or PCB mountSquare, thermoplastic housingJackscrew for mating Accepts contact sizes 4 (100 amps), 8 (60 amps),12 (25 amps), 16 (13 amps), and 20 (7.5 amps)6-22 AWG48, 60, 102, and 128 cavity arrangementsFlange mountRectangular, thermoplastic housingJackscrew for matingWedgelocks confirm contact alignment and retentionDRB Series DRC Series Accepts contact sizes 16 (13 amps) and 20 (7.5amps)14-22 AWG24, 38, 40, 50, 60, 64, 70, and 80 cavity arrangementsIn-line, flange, or PCB mountRectangular, thermoplastic housingJackscrew for matingDRCP Series Accepts contact sizes 12 (25 amps) and 20 (7.5amps)10-22 AWG86 and 126 cavity arrangementsFlange or PCB mountRectangular, thermoplastic housingJackscrew for matingTPA confirms contact alignment and retentionDT Series Accepts contact size 16 (13 amps)14-20 AWG2, 3, 4, 6, 8, and 12 cavity arrangementsIn-line, flange, or PCB mountRectangular, thermoplastic housingIntegrated latch for matingWedgelocks confirm contact alignment and retention Accepts contact sizes 4 (100 amps), 8 (60 amps),and 12 (25 amps)6-14 AWG1 cavity arrangementIn-line or flange mountCircular, thermoplastic housingIntegrated latch for matingDTHD Series LADD Distribution3Connector Series OverviewOverviewAEC Series
Connector Series OverviewDTM SeriesOverview Accepts contact size 20 (7.5 amps)16-22 AWG2, 3, 4, 6, 8, and 12 cavity arrangementsIn-line, flange, or PCB mountRectangular, thermoplastic housingIntegrated latch for matingWedgelocks confirm contact alignment and retention Accepts contact size 12 (25 amps)10-14 AWG2 and 4 cavity arrangementsIn-line, flange, or PCB mountRectangular, thermoplastic housingIntegrated latch for matingWedgelocks confirm contact alignment and retention Accepts contact size Ø8mm (150 amps)2-6 AWG1 cavity arrangementIn-lineCircular, thermoplastic housingIntegrated latch for matingTPA confirms contact alignment and retention Accepts contact size 16 (13 amps)14-20 AWG18 cavity arrangementFlange mountRectangular, thermoplastic housingIntegrated latch for matingWedgelocks confirm contact alignment and retention Accepts contact sizes 4 (100 amps), 12 (25 amps),and 16 (13 amps)6-20 AWG3, 4, 5, 6, and 9 cavity arrangementsIn-line, flange, or PCB mountCircular, thermoplastic housingCoupling ring for matingDTP SeriesDTSK SeriesDTV SeriesHD10 Series HD30 Series Connector Series Overview4Accepts contact sizes 4 (100 amps), 8 (60 amps),12 (25 amps), 16 (13 amps), and 20 (7.5 amps)6-22 AWG2, 6, 8, 9, 14, 16, 18, 19, 20, 21, 23, 29, 31, 33, 35and 47 cavity arrangementsIn-line or flange mountCircular, aluminum housingCoupling ring for matingLADD Distribution
Connector Series Overview Accepts contact sizes 4 (100 amps), 8 (60 amps),12 (25 amps), 16 (13 amps), and 20 (7.5 amps)4-22 AWG2, 6, 7, 8, 9, 14, 16, 18, 19, 20, 21, 23, 29, 31, 33, 35and 47 cavity arrangementsIn-line or flange mountCircular, thermoplastic housingCoupling ring for matingIMC Series Accepts contact sizes 16 (13 amps), 20 (7.5 amps),and 22 (5 amps)16-26 AWG2, 3, 4, 5, 7, and 12 cavity arrangementsIn-line or flange mountCircular, Ultem housingCoupling ring for matingQuick Connect Series Accepts contact sizes 16 (13 amps), 20 (7.5 amps),and 22 (5 amps)16-26 AWG2, 7, and 12 cavity arrangementsIn-line or flange mountCircular, Ultem housingPush button mechanism for matingStrike Series Accepts contact sizes Ø12mm (300 amps), Ø8mm(150 amps), 12 (25 amps), 16 (13 amps) and 20 (7.5amps)3/0-22 AWG1, 4, 8, 18, 22, 32, 36, 50, and 64 cavity arrangementsIn-line, flange, or PCB mountSquare, thermoplastic housingLever for matingTPA confirms contact alignment and retentionWT Series LADD Distribution5Accepts contact sizes 4 (100 amps) and 16 (13amps)6, 16-20 AWG3, 16, and 31 cavity arrangementsIn-line or flange mountCircular, anodized aluminum or composite housingConnector Series OverviewOverviewHDP20 Series
Electrical ConnectorsConnectorsCavityContactSize(s)Part DescriptionWedge/TPAPart Number1 CAVITY CONNECTORSDTCE Series14Recept., DTCE, 1 way, black, end capDTCE04-1-4P-E003N/A14Recept., DTCE, 1 way, black, end cap, sealed flange, inside mountDTCE04-1-4P-LE03N/A18Recept., DTCE, 1 way, black, end capDTCE04-1-8P-E003N/A112Recept., DTCE, 1 way, black, end capDTCE04-1-12P-E003N/A14Plug, DTCE, 1 way, black, end capDTCE06-1-4S-E003N/A18Plug, DTCE, 1 way, black, end capDTCE06-1-8S-E003N/A112Plug, DTCE, 1 way, black, end capDTCE06-1-12S-E003N/ADTHD Series14Recept., DTHD, 1 way, blackDTHD04-1-4PN/A14Recept., DTHD, 1 way, black, end capDTHD04-1-4P-E003N/A14Recept., DTHD, 1 way, black, sealed flange, inside mountDTHD04-1-4P-L009N/A14Recept., DTHD, 1 way, black, sealed flange, outside mountDTHD04-1-4P-L013N/A18Recept., DTHD, 1 way, blackDTHD04-1-8PN/A18Recept., DTHD, 1 way, black, end capDTHD04-1-8P-E003N/A112Recept., DTHD, 1 way, blackDTHD04-1-12PN/A112Recept., DTHD, 1 way, black, end capDTHD04-1-12P-E003N/A14Plug, DTHD, 1 way, blackDTHD06-1-4SN/A14Plug, DTHD, 1 way, black, end capDTHD06-1-4S-E003N/A18Plug, DTHD, 1 way, blackDTHD06-1-8SN/A18Plug, DTHD, 1 way, black, end capDTHD06-1-8S-E003N/A112Plug, DTHD, 1 way, blackDTHD06-1-12SN/A112Plug, DTHD, 1 way, black, end capDTHD06-1-12S-E003N/ADTSK Series1Ø8mmRecept., DTSK, 1 way, A key, grayDTSK04-1-08PAIncluded1Ø8mmPlug, DTSK, 1 way, A key, grayDTSK06-1-08SAIncludedHD16-4-4S-C024N/AHD10 Series(4)11 sz. 4Plug, HD10, 1 way, gray, threaded rear, cavities B, C, D, blockedJiffy Splices14Splice, Jiffy, sz. 4JS-04-00N/A112Splice, Jiffy, sz. 12JS-12-00N/A116Splice, Jiffy, sz. 16JS-16-00N/AStrike Series1Ø8mmRecept., Strike, SM shell, 1 way, A key, black, sealed flangeSRK02-SMA-01A-001Included1Ø8mmPlug, Strike, SM shell, 1 way, A key, blackSRK06-SMA-01A-001Included1Ø12mmRecept., Strike, SM shell, 1 way, A key, black, sealed flangeSRK02-SMA-01B-001Included1Ø12mmRecept., Strike, SM shell, 1 way, B key, black, sealed flangeSRK02-SMB-01B-001Included1Ø12mmPlug, Strike, SM shell, 1 way, A key, blackSRK06-SMA-01B-001Included1Ø12mmPlug, Strike, SM shell, 1 way, B key, blackSRK06-SMB-01B-001Included2 CAVITY CONNECTORSDT Series216Recept., DT, 2 way, grayDT04-2PW2P216Recept., DT, 2 way, gray, reduced dia. sealsDT04-2P-C015W2PElectrical Connectors6LADD Distribution
CavityContactSize(s)Part DescriptionPart NumberWedge/TPA216Recept., DT, 2 way, gray, solid rear grommetDT04-2P-C017N/A216Recept., DT, 2 way, gray, reduced dia. seals, end capDT04-2P-CE01W2P216Recept., DT, 2 way, black, reduced dia. sealsDT04-2P-CE02W2P216Recept., DT, 2 way, black, reduced dia. seals, end capDT04-2P-CE03W2P216Recept., DT, 2 way, gray, reduced dia. seals, shrink boot adapterDT04-2P-CE04W2P216Recept., DT, 2 way, black, reduced dia. seals, shrink boot adapterDT04-2P-CE09W2P216Recept., DT, 2 way, gray, end capDT04-2P-E003W2P216Recept., DT, 2 way, blackDT04-2P-E004W2P216Recept., DT, 2 way, black, end capDT04-2P-E005W2P216Recept., DT, 2 way, gray, shrink boot adapterDT04-2P-E008W2P216Recept., DT, 2 way, black, 90 molded pins, feed-thruDT04-2P-N006N/A216Recept., DT, 2 way, black, snap-in design, molded pins, wire leads withcrimped terminalsDT04-2P-RL01N/A216Recept., DT, 2 way, black, molded-in diode (MUR460)DT04-2P-RT01N/A216Recept., DT, 2 way, black, molded-in diode (Toshiba)DT04-2P-RT02N/A216Recept., DT, 2 way, green, molded-in diodeDT04-2P-RT06N/A216Recept., DT, 2 way, black, molded-in resistorDT04-2P-RT25N/A216Plug, DT, 2 way, grayDT06-2SW2S216Plug, DT, 2 way, gray, reduced dia. sealsDT06-2S-C015W2S216Plug, DT, 2 way, gray, reduced dia. seals, end capDT06-2S-CE01W2S216Plug, DT, 2 way, gray, reduced dia. seals, shrink boot adapterDT06-2S-CE04W2S216Plug, DT, 2 way, black, enhanced seal ret., reduced dia. seals, end capDT06-2S-CE05W2S-P012216Plug, DT, 2 way, black, enhanced seal ret., reduced dia. sealsDT06-2S-CE06W2S-P012216Plug, DT, 2 way, black, enhanced seal ret., reduced dia. seals, shrink bootadapterDT06-2S-CE13W2S-P012216Plug, DT, 2 way, gray, end capDT06-2S-E003W2S216Plug, DT, 2 way, blackDT06-2S-E004W2S216Plug, DT, 2 way, black, end capDT06-2S-E005W2S216Plug, DT, 2 way, gray, shrink boot adapterDT06-2S-E008W2S216Plug, DT, 2 way, gray, fluorosilicone seal, end capDT06-2S-EF01W2S216Plug, DT, 2 way, black, enhanced seal ret., end capDT06-2S-EP06W2S-P012216Plug, DT, 2 way, black, enhanced seal ret., shrink boot adapterDT06-2S-EP11W2S-P012216Plug, DT, 2 way, black, enhanced seal ret., fluorosilicone, end capDT06-2S-FP02W2S-P012216Plug, DT, 2 way, black, enhanced seal ret.DT06-2S-P012W2S-P012216Recept., DT13, 2 way, gray, 90 molded pins, PCB mountDT13-2PN/A216Recept., DT15, 2 way, gray, straight molded pins, PCB mountDT15-2PN/A216Recept., DT15, 2 way, gray, straight molded pins, PCB mount, 5 P.S.I.DT15-2P-P010N/ADT13/15 SeriesDTF Series216Recept., DTF, 2 way, black, 90 molded pins, flangeless PCB mountDTF13-2PN/A216Recept., DTF, 2 way, A key, black, 90 molded pins, flangeless PCB mountDTF13-2PAN/A216Recept., DTF, 2 way, B key, black, 90 molded pins, flangeless PCB mountDTF13-2PBN/ADTM Series220Recept., DTM, 2 way, grayDTM04-2PWM-2P220Recept., DTM, 2 way, gray, end capDTM04-2P-E003WM-2P220Recept., DTM, 2 way, blackDTM04-2P-E004WM-2PLADD Distribution7Electrical ConnectorsConnectorsElectrical Connectors
Electrical ConnectorsConnectorsCavityContactSize(s)Part DescriptionPart NumberWedge/TPA220Recept., DTM, 2 way, black, end capDTM04-2P-E005WM-2P220Recept., DTM, 2 way, gray, shrink boot adapterDTM04-2P-E007WM-2P220Recept., DTM, 2 way, B key, black, terminating resistor, gold pins, J1939DTM04-2P-EP10Included220Recept., DTM, 2 way, black, terminating resistor, gold pins, J1939DTM04-2P-P006Included220Recept., DTM, 2 way, black, “Y” connector, molded gold pins, J1939DTM04-2P-P007N/A220Plug, DTM, 2 way, grayDTM06-2SWM-2S220Plug, DTM, 2 way, gray, end capDTM06-2S-E003WM-2S220Plug, DTM, 2 way, blackDTM06-2S-E004WM-2S220Plug, DTM, 2 way, black, end capDTM06-2S-E005WM-2S220Plug, DTM, 2 way, gray, shrink boot adapterDTM06-2S-E007WM-2S220Plug, DTM, 2 way, black, shrink boot adapterDTM06-2S-EE03WM-2S220Plug, DTM, 2 way, B key, black, terminating resistor, gold sockets, J1939DTM06-2S-EP10Included220Plug, DTM, 2 way, gray, terminating resistor, gold sockets, J1939DTM06-2S-P006IncludedDTMH Series220Recept., DTMH, 2 way, A key, black, high tempDTMH04-2PAIncluded220Recept., DTMH, 2 way, B key, black, high tempDTMH04-2PBIncluded220Recept., DTMH, 2 way, C key, black, high tempDTMH04-2PCIncluded220Recept., DTMH, 2 way, D key, black, high tempDTMH04-2PDIncluded220Plug, DTMH, 2 way, A key, black, high tempDTMH06-2SAIncluded220Plug, DTMH, 2 way, B key, black, high tempDTMH06-2SBIncluded220Plug, DTMH, 2 way, C key, black, high tempDTMH06-2SCIncluded220Plug, DTMH, 2 way, D key, black, high tempDTMH06-2SDIncludedDTMN Series220Recept., DTMN, 2 way, black, non-environmentalDTMN04-2PN/A220Plug, DTMN, 2 way, black, non-environmentalDTMN06-2SN/ADTP Series212Recept., DTP, 2 way, grayDTP04-2PWP-2P212Recept., DTP, 2 way, gray, reduced dia. sealsDTP04-2P-C015WP-2P212Recept., DTP, 2 way, gray, end capDTP04-2P-E003WP-2P212Recept., DTP, 2 way, blackDTP04-2P-E004WP-2P212Plug, DTP, 2 way, grayDTP06-2SWP-2S212Plug, DTP, 2 way, gray, reduced dia. sealsDTP06-2S-C015WP-2S212Plug, DTP, 2 way, gray, end capDTP06-2S-E003WP-2S212Plug, DTP, 2 way, blackDTP06-2S-E004WP-2SHD30 Series(6)22 sz. 4Recept., HD30, 18 shell, 2 way, N seal, cavities 1, 2, 5, 6 blockedHD34-18-6PN-C030N/A(6)22 sz. 4Recept., HD30, 18 shell, 2 way, N seal, cavities 1, 2, 5, 6 blocked, cableclampHD34-18-6PN-C030-059N/A(6)22 sz. 4Plug, HD30, 18 shell, 2 way, N seal, cavities 1, 2, 5, 6 blockedHD36-18-6SN-C030(6)22 sz. 4Plug, HD30, 18 shell, 2 way, N seal, cavities 1, 2, 5, 6 blocked, cable clamp HD36-18-6SN-C030-059N/AN/AHDP20 Series(6)22 sz. 4Recept., HDP20, 18 shell, 2 way, black, N seal, cavities 1, 2, 5, 6 blockedHDP24-18-6PN-C030N/A(6)22 sz. 4Plug, HDP20, 18 shell, 2 way, black, N seal, cavities 1, 2, 5, 6 blockedHDP26-18-6SN-C030N/AIMC Series2IMC/QC 20Recept., IMC, 100 series, 2 way, blackIMC11-2002XN/A2IMC/QC 20Recept., IMC, 100 series, 2 way, black, flangeIMC14-2002XN/AElectrical Connectors8LADD Distribution
CavityContactSize(s)Part DescriptionPart NumberWedge/TPA2IMC/QC 20Plug, IMC, 100 series, 2 way, blackIMC16-2002XN/A2IMC/QC 16Recept., IMC, 200 series, 2 way, blackIMC21-1602XN/A2IMC/QC 16Recept., IMC, 200 series, 2 way, black, flangeIMC24-1602XN/A2IMC/QC 16Plug, IMC, 200 series, 2 way, blackIMC26-1602XN/AQuick Connect Series2IMC/QC 16Recept., QC, 2 way, blackQC24-1602XN/A2IMC/QC 16Plug, QC, 2 way, blackQC26-1602XN/ADT04-3PW3P3 CAVITY CONNECTORSDT Series316(3)22 sz. 16Recept., DT, 3 way, gray, C cavity blockedDT04-3P-C008W3P316Recept., DT, 3 way, gray, reduced dia. sealsDT04-3P-C015W3P316Recept., DT, 3 way, gray, solid rear grommetDT04-3P-C017N/A316Recept., DT, 3 way, gray, reduced dia. seals, end capDT04-3P-CE01W3P316Recept., DT, 3 way, black, reduced dia. sealsDT04-3P-CE02W3P316Recept., DT, 3 way, black, reduced dia. seals, end capDT04-3P-CE03W3P316Recept., DT, 3 way, gray, reduced dia. seals, shrink boot adapterDT04-3P-CE04W3P316Recept., DT, 3 way, black, reduced dia. seals, shrink boot adapterDT04-3P-CE09W3P316Recept., DT, 3 way, gray, end capDT04-3P-E003W3P316Recept., DT, 3 way, blackDT04-3P-E004W3P316Recept., DT, 3 way, black, end capDT04-3P-E005W3P316Recept., DT, 3 way, gray, shrink boot adapterDT04-3P-E008W3P316Recept., DT, 3 way, black, shrink boot adapterDT04-3P-EE01W3P316Recept., DT, 3 way, black, terminating resistor, gold pins, J1939DT04-3P-EP10Included316Recept., DT, 3 way, gray, flangeDT04-3P-L012W3P316Recept., DT, 3 way, gray, flange, shrink boot adapterDT04-3P-LE08W3P316Recept., DT, 3 way, black, flange, shrink boot adapterDT04-3P-LE12W3P316Recept., DT, 3 way, gray, terminating resistor, gold pins, J1939DT04-3P-P006Included316Recept., DT, 3 way, gray, “Y” connector, molded gold pins, J1939DT04-3P-P007N/A316Plug, DT, 3 way, grayDT06-3SW3S(3)22 sz. 16Plug, DT, 3 way, gray, C cavity blockedDT06-3S-C008W3S316Plug, DT, 3 way, gray, reduced dia. sealsDT06-3S-C015W3S316Plug, DT, 3 way, gray, solid rear grommetDT06-3S-C017Included316Plug, DT, 3 way, gray, reduced dia. seals, end capDT06-3S-CE01W3S316Plug, DT, 3 way, black, reduced dia. sealsDT06-3S-CE02W3S316Plug, DT, 3 way, gray, reduced dia. seals, shrink boot adapterDT06-3S-CE04W3S316Plug, DT, 3 way, black, enhanced seal ret., reduced dia. seals, end capDT06-3S-CE05W3S-P012316Plug, DT, 3 way, black, enhanced seal ret., reduced dia. sealsDT06-3S-CE06W3S-P012316Plug, DT, 3 way, black, enhanced seal ret., reduced dia. seals, shrink bootadapterDT06-3S-CE13W3S-P012316Plug, DT, 3 way, black, enhanced seal ret., reduced dia. seals, latch guardend capDT06-3S-CE14W3S-P012316Plug, DT, 3 way, black, enhanced seal ret., reduced dia. seals, flange,disabled latchDT06-3S-CL08W3S-P012316Plug, DT, 3 way, black, enhanced seal ret., solid rear grommet, end capDT06-3S-CP01Included316Plug, DT, 3 way, gray, end capDT06-3S-E003W3SLADD DistributionRecept., DT, 3 way, gray9Electrical ConnectorsConnectorsElectrical Connectors
Electrical ConnectorsConnectorsCavityContactSize(s)Part DescriptionPart NumberWedge/TPA316Plug, DT, 3 way, blackDT06-3S-E004W3S316Plug, DT, 3 way, black, end capDT06-3S-E005W3S316Plug, DT, 3 way, gray, shrink boot adapterDT06-3S-E008W3S316Plug, DT, 3 way, gray, latch guard end capDT06-3S-EP05W3S316Plug, DT, 3 way, black, enhanced seal ret., end capDT06-3S-EP06W3S-P012316Plug, DT, 3 way, black, enhanced seal ret., latch guard end capDT06-3S-EP09W3S-P012316Plug, DT, 3 way, black, terminating resistor, gold sockets, end cap, J1939DT06-3S-EP10Included316Plug, DT, 3 way, black, enhanced seal ret., shrink boot adapterDT06-3S-EP11W3S-P012316Plug, DT, 3 way, gray, terminating resistor, gold sockets, end cap, J1939DT06-3S-P006Included316Plug, DT, 3 way, black, enhanced seal ret.DT06-3S-P012W3S-P012316Plug, DT, 3 way, black, enhanced seal ret., single piece shrink boot adapter DT06-3S-P032W3S-P012316Plug, DT, 3 way, gray, terminating resistor, gold sockets, latch guard endcap, J1939DT06-3S-PE01Included316Plug, DT, 3 way, black, enhanced seal ret., terminating resistor, gold sockets, end cap, J1939DT06-3S-PP01IncludedDTF Series316Recept., DTF, 3 way, black, 90 molded pins, flangeless PCB mount316Recept., DTF, 3 way, black, 90 molded pins, flangeless PCB mount, J1939 DTF13-3P-1939DTF13-3PN/AN/ADTM Series320Recept., DTM, 3 way, grayDTM04-3PWM-3P320Recept., DTM, 3 way, gray, end capDTM04-3P-E003WM-3P320Recept., DTM, 3 way, blackDTM04-3P-E004WM-3P320Recept., DTM, 3 way, black, end capDTM04-3P-E005WM-3P320Plug, DTM, 3 way, grayDTM06-3SWM-3S320Plug, DTM, 3 way, blackDTM06-3S-E004WM-3S320Plug, DTM, 3 way, gray, shrink boot adapterDTM06-3S-E007WM-3S320Recept., DTMH, 3 way, A key, black, high tempDTMH04-3PAIncluded320Plug, DTMH, 3 way, A key, black, high tempDTMH06-3SAIncluded320Recept., DTMN, 3 way, black, non-environmentalDTMN04-3PN/A320Plug, DTMN, 3 way, black, non-environmentalDTMN06-3SN/A316Recept., HD10, 3 way, gray, flange, threaded rearHD10-3-96PN/A316Recept., HD10, 3 way, gray, in-line, non-threaded rearHD14-3-16PN/A316Recept., HD10, 3 way, gray, in-line, threaded rearHD14-3-96PN/A316Plug, HD10, 3 way, gray, non-threaded rearHD16-3-16SN/A316Plug, HD10, 3 way, gray, threaded rearHD16-3-96SN/ADTMH SeriesDTMN SeriesHD10 SeriesIMC Series3IMC/QC 20Recept., IMC, 100 series, 3 way, blackIMC11-2003XN/A3IMC/QC 20Recept., IMC, 100 series, 3 way, black, flangeIMC14-2003XN/A3IMC/QC 20Plug, IMC, 100 series, 3 way, blackIMC16-2003XN/A34Recept., WT, 24 shell, 3 way, blackWT04B-24-03PNN/A34Recept., WT, 24 shell, 3 way, black, reverseWT04B-24-03SNN/A34Plug, WT, 24 shell, 3 way, black, reverseWT06B-24-03PNN/AWT SeriesElectrical Connectors10LADD Distribution
CavityContactSize(s)34Part DescriptionPart NumberWedge/TPAPlug, WT, 24 shell, 3 way, blackWT06B-24-03SNN/A4 CAVITY CONNECTORSDT Series416Recept., DT, 4 way, grayDT04-4PW4P416Recept., DT, 4 way, gray, reduced dia. sealsDT04-4P-C015W4P416Recept., DT, 4 way, gray, solid rear grommetDT04-4P-C017N/A416Recept., DT, 4 way, gray, reduced dia. seals, end capDT04-4P-CE01W4P416Recept., DT, 4 way, black, reduced dia. sealsDT04-4P-CE02W4P416Recept., DT, 4 way, black, reduced dia. seals, end capDT04-4P-CE03W4P416Recept., DT, 4 way, gray, reduced dia. seals, shrink boot adapterDT04-4P-CE04W4P416Recept., DT, 4 way, black, reduced dia. seals, shrink boot adapterDT04-4P-CE09W4P416Recept., DT, 4 way, gray, reduced dia. seals, flangeDT04-4P-CL03W4P416Recept., DT, 4 way, gray, end capDT04-4P-E003W4P416Recept., DT, 4 way, blackDT04-4P-E004W4P416Recept., DT, 4 way, black, end capDT04-4P-E005W4P416Recept., DT, 4 way, gray, shrink boot adapterDT04-4P-E008W4P416Recept., DT, 4 way, black, (1) 4 pin buss, nickel contactsDT04-4P-EP13Included416Recept., DT, 4 way, gray, flangeDT04-4P-L012W4P416Recept., DT, 4 way, black, flange, end capDT04-4P-LE11W4P416Recept., DT, 4 way, black, round housing, end cap, one piece designDT04-4P-LE13W4P416Recept., DT, 4 way, gray, (1) 4 pin buss, nickel contactsDT04-4P-P021Included416Recept., DT, 4 way, black, molded-in diode (MUR460)DT04-4P-RT01N/A416Recept., DT, 4 way, gray, two molded-in diodes (MUR460)DT04-4P-RT03N/A416Plug, DT, 4 way, grayDT06-4SW4S416Plug, DT, 4 way, gray, reduced dia. sealsDT06-4S-C015W4S416Plug, DT, 4 way, gray, solid rear grommetDT06-4S-C017Included416Plug, DT, 4 way, gray, reduced dia. seals, end capDT06-4S-CE01W4S416Plug, DT, 4 way, black, reduced dia. sealsDT06-4S-CE02W4S416Plug, DT, 4 way, gray, reduced dia. seals, shrink boot adapterDT06-4S-CE04W4S416Plug, DT, 4 way, black, enhanced seal ret., reduced dia. seals, end capDT06-4S-CE05W4S-P012416Plug, DT, 4 way, black, enhanced seal ret., reduced dia. sealsDT06-4S-CE06W4S-P012416Plug, DT, 4 way, black, enhanced seal ret., reduced dia. seals, shrink bootadapterDT06-4S-CE13W4S-P012416Plug, DT, 4 way, black, enhanced seal ret., reduced dia. seals, end cap w/mounting clip dovetailDT06-4S-CE15W4S-P012416Plug, DT, 4 way, black, enhanced seal ret., solid rear grommet, end capDT06-4S-CP01Included416Plug, DT, 4 way, gray, end capDT06-4S-E003W4S416Plug, DT, 4 way, blackDT06-4S-E004W4S416Plug, DT, 4 way, black, end capDT06-4S-E005W4S416Plug, DT, 4 way, gray, shrink boot adapterDT06-4S-E008W4S416Plug, DT, 4 way, black, enhanced seal ret., end capDT06-4S-EP06W4S-P012416Plug, DT, 4 way, black, enhanced seal ret., shrink boot adapterDT06-4S-EP11W4S-P012416Plug, DT, 4 way, black, enhanced seal ret.DT06-4S-P012W4S-P012DT13/15 Series416Recept., DT13, 4 way, gray, 90 molded pins, PCB mountDT13-4PN/A416Recept., DT13, 4 way, gray, 90 molded gold pins, PCB mountDT13-4P-G003N/ALADD Distribution11Electrical ConnectorsConnectorsElectrical Connectors
Electrical Part DescriptionPart Number16Recept., DT15, 4 way, gray, straight molded pins, PCB mountDT15-4PN/A416Recept., DT15, 4 way, gray, straight molded gold pins, PCB mountDT15-4P-G003N/A416Recept., DTF, 4 way, black, 90 molded pins, flangeless PCB mountDTF13-4PN/A416Recept., DTF, 4 way, black, 90 molded gold pins, flangeless PBC mountDTF13-4P-G003N/ADTF SeriesDTM Series420Recept., DTM, 4 way, grayDTM04-4PWM-4P420Recept., DTM, 4 way, gray, end capDTM04-4P-E003WM-4P420Recept., DTM, 4 way, blackDTM04-4P-E004WM-4P420Recept., DTM, 4 way, black, end capDTM04-4P-E005WM-4P420Plug, DTM, 4 way, grayDTM06-4SWM-4S420Plug, DTM, 4 way, blackDTM06-4S-E004WM-4S420Plug, DTM, 4 way, gray, shrink boot adapterDTM06-4S-E007WM-4SDTMH04-4PAIncludedDTMH Series420Recept., DTMH, 4 way, A key, black, high temp420Recept., DTMH, 4 way, B key, black, high tempDTMH04-4PBIncluded420Recept., DTMH, 4 way, C key, black, high tempDTMH04-4PCIncluded420Recept., DTMH, 4 way, D key, black, high tempDTMH04-4PDIncluded420Plug, DTMH, 4 way, A key, black, high tempDTMH06-4SAIncluded420Plug, DTMH, 4 way, B key, black, high tempDTMH06-4SBIncluded420Plug, DTMH, 4 way, C key, black, high tempDTMH06-4SCIncluded420Plug, DTMH, 4 way, D key, black, high tempDTMH06-4SDIncludedDTP Series412Recept., DTP, 4 way, grayDTP04-4PWP-4P412Recept., DTP, 4 way, gray, reduced dia. sealsDTP04-4P-C015WP-4P412Recept., DTP, 4 way, gray, reduced dia. seals, end capDTP04-4P-CE01WP-4P412Recept., DTP, 4 way, gray, end capDTP04-4P-E003WP-4P412Recept., DTP, 4 way, blackDTP04-4P-E004WP-4P412Recept., DTP, 4 way, gray, flangeDTP04-4P-L012WP-4P412Recept., DTP, 4 way, gray, flange, end capDTP04-4P-LE07WP-4P412Plug, DTP, 4 way, grayDTP06-4SWP-4S412Plug, DTP, 4 way, gray, reduced dia. sealsDTP06-4S-C015WP-4S412Plug, DTP, 4 way, gray, reduced dia. seals, end capDTP06-4S-CE01WP-4S412Plug, DTP, 4 way, black, reduced dia. sealsDTP06-4S-CE02WP-4S412Plug, DTP, 4 way, gray, end capDTP06-4S-E003WP-4S412Plug, DTP, 4 way, blackDTP06-4S-E004WP-4S412Plug, DTP, 4 way, black, shrink boot adapterDTP06-4S-EE01WP-4S412Recept., DTP10, 4 way, black, straight molded pins, PCB mountDTP10-4PN/A412Recept., DTP13, 4 way, black, 90 molded pins, PCB mountDTP13-4PN/AHD10 Series41 sz. 4, 3 sz. 16 Recept., HD10, 4 way, gray, flange, threaded rearHD10-4-4PN/A41 sz. 4, 3 sz. 16 Plug, HD10, 4 way, gray, threaded rearHD16-4-4SN/AHD16-4-4S-C024N/A(4)11 sz. 4Plug, HD10, 4 way, gray, flange, threaded rear, cavities B, C, D blocked4IMC/QC 22Recept., IMC, 100 series, 4 way, blackIMC11-2204XN/A4IMC/QC 22Recept., IMC, 100 series, 4 way, black, flangeIMC14-2204XN/AIMC SeriesElectrical Connectors12LADD Distribution
CavityContactSize(s)Part DescriptionPart Number4IMC/QC 22Plug, IMC, 100 series, 4 way, blackIMC16-2204XWedge/TPAN/AStrike Series42 sz. Ø8mm,2 sz. 16Recept., Strike, MD shell, 4 way, A key, black, sealed flange, no cable attachmentSRK02-MDA-04A-001Included42 sz. Ø8mm,2 sz. 16Plug, Strike, MD shell, 4 way, A key, black, no cable attachmentSRK06-MDA-04A-001Included5 CAVITY CONNECTORSHD10 Series516Recept., HD10, 5 way, gray, flange, non-threaded rearHD10-5-16PN/A516Recept., HD10, 5 way, gray, flange, non-threaded rear, key removed fromflangeHD10-5-16P-B009N/A516Recept., HD10, 5 way, gray, in-line, non-threaded rearHD14-5-16PN/A516Plug, HD10, 5 way, gray, non-threaded rearHD16-5-16SN/AIMC21-2005XN/AIMC Series5IMC/QC 20Recept., IMC, 200 series, 5 way, black5IMC/QC 20Recept., IMC, 200 series, 5 way, black, flangeIMC24-2005XN/A5IMC/QC 20Plug, IMC, 200 series, 5 way, blackIMC26-2005XN/A6 CAVITY CONNECTORSDT Series616Recept., DT, 6 way, grayDT04-6PW6P616Recept., DT, 6 way, gray, reduced dia. sealsDT04-6P-C015W6P616Recept., DT, 6 way, gray, solid rear grommetDT04-6P-C017N/A616Recept., DT, 6 way, gray, reduced dia. seals, end capDT04-6P-CE01W6P616Recept., DT, 6 way, black, reduced dia. sealsDT04-6P-CE02W6P616Recept., DT, 6 way, black, reduced dia. seals, end capDT04-6P-CE03W6P616Recept., DT, 6 way, black, reduced dia. seals, sealed flange, end capDT04-6P-CL09W6P616Recept., DT, 6 way, gray, end capDT04-6P-E003W6P616Recept., DT, 6 way, blackDT04-6P-E004W6P616Recept., DT, 6 way, black, end capDT04-6P-E005W6P616Recept., DT, 6 way, black, (1) 6 pin buss, nickel contactsDT04-6P-EP13Included616Recept., DT, 6 way, black, (2) 3 pin busses, nickel contactsDT04-6P-EP14Included616Recept., DT, 6 way, black, DIN backshell adapterDT04-6P-L019W6P616Recept., DT, 6 way, gray, (1) 6 pin buss, nickel contactsDT04-6P-P021Included616Plug, DT, 6 way, grayDT06-6S616Plug, DT, 6 way, gray, reduced dia. sealsDT06-6S-C015W6S616Plug, DT, 6 way, gray, s
Deutsch Connectors Trading (Shanghai) Co., Ltd. Rm #1032, 10F Central Plaza 381 Huai Hai Zhong Road Shanghai 200020, China Phone: 86 21 66082211 Email: [email protected] EMEA LADD Distribution Tyco Electronics AMP GmbH Fraunhoferstr. 11b 82152 Martinsried, Germany Phone: 49 89 899157-0 Fax: 49 89 8574684
