Transcription

OWNER’S MANUALSimmonsDrums.net19274187 Simmons SD200 Owner's Manual.indd 11/21/20 11:21 AM

OWNER’S MANUALSAFETY INSTRUCTIONSTHE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE ISINTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGEWITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTEA RISK OF ELECTRIC SHOCK TO PERSONS.THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERTTHE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE(SERVICING)INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE PRODUCT.APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTSFILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.1.2.3.4.5.6.7.Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near the heat sources such as radiators,heat registers, stoves, or other apparatus (includingamplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized orgrounding-type plug. A polarized plug has two bladeswith one wider than the other. A grounding type plughas two blades and a third grounding prong. The wideblade or the third prong are provided for your safety, ifthe provided plug does not fit into your outlet, consultan electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on orpinched particularly at plugs convenience receptacles,and the point where they exit from the apparatus.11. Only use attachments/accessories specified bythe manufacturer.12. Use only with the cart, stand, tripod,bracket, or table specified by themanufacturer, or sold with theapparatus. When a cart is used,use caution when moving the cart/apparatus combination to avoid injuryFigure 1from tip-over (Figure1).13. Unplug this apparatus during lightning storms orwhen unused for a long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plugis damaged, liquid has been spilled or objects havefallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,or has been dropped.WARNING: To reduce the risk of fire or electric shock, donot expose this apparatus to rain or moisture.CAUTION: Apparatus shall not be exposed to dripping orsplashing and no objects filled with liquids, such as vases,shall be placed on the apparatus.CAUTION: Apparatus shall not be exposed to dripping orsplashing and no objects filled with liquids, such as vases,shall be placed on the apparatus.219274187 Simmons SD200 Owner's Manual.indd 21/21/20 11:21 AM

SDTABLE OF CONTENTSSAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4ASSEMBLING YOUR KIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5CONNECTIONSConnecting the Pads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Connecting the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . 9Connecting External Audio Devices. . . . . . . . . . . . . . . . . . . . 9Connecting USB MIDI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Connecting Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9SD200 DRUM MODULE OPERATIONTop Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10LED Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Back Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11GETTING STARTEDSwitching the Power On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Basic Operations and Navigation . . . . . . . . . . . . . . . . . . . . . . 12Listening to the Demo Song . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Selecting a Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Selecting a Song. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Playing a Song. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Muting the Drum Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13ADVANCED OPERATIONSEditing a Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Recording a Song. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Click (Metronome). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Utility Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Trigger Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Parameter Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16MIDI Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16DRUM KIT PRESETSPreset Drum Kit List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Song Style List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Drum Sound List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17MIDI IMPLEMENTATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . 19SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20319274187 Simmons SD200 Owner's Manual.indd 31/21/20 11:21 AM

OWNER’S MANUALFEATURESSD200 SOUND MODULE GENERAL FEATURESPOLYPHONY Voices - 32SOUND Drum Voices - 93 Drum Kits - 10 Preset / 1 User Songs - 10 Preset / 1 UserEFFECTS Reverb - Hall1, Hall2, Room1, Room2, Room3, Stage1, Stage2,Plate, Delay, Echo. Chorus - Chorus1, Chorus2, Chorus3, Chorus4, ChorusFB, ShortDelay, Short Delay FB, Flanger2, Flanger3, Celeste1, Celeste2,Celeste3.TRIGGER INPUTS 1 x Kick, Single Zone 1 x Snare, Single Zone 3 x Toms, Single Zone 1 x Hi-Hat, Single Zone 1 x Ride, Single Zone 1 x Crash, Single ZoneHARDWARE Drum Rack and Mounts Kick pedal / Trigger Module Hi-Hat pedal 8” Single Zone Mesh Snare Pad 8” Single Zone Tom Pads (x3) 8” Single Zone Hi-Hat Cymbal Pad 10” Single Zone Crash Cymbal Pad 10” Single Zone Ride Cymbal PadEXTERNAL CONNECTIONS 1/8” Headphone Output 2 - ¼” Master Outputs 1/8” Stereo Aux Input USB Connection for MIDI via computerSEQUENCER Preset Songs - 10 User Songs - 1 Tempo - 20-240 BPM Click/Metronome - Click Voice, Time Signature, Tempo, Interval, VolumePOWER Power: 9v, 600maDIMENSIONS 37”(H) x 27”(W) x 10”(L)WEIGHT 37 lbs / 16.78 kg419274187 Simmons SD200 Owner's Manual.indd 41/21/20 11:21 AM

SDASSEMBLING YOUR KITINSIDE THIS PACKAGEBefore assembly, please make sure that all the items listed below are present.CymbalsAccessoriesSingle Zone10” Crash Cymbal PadSingle Zone8” Hi-Hat PadSingle Zone10” Ride Cymbal PadAC Adaptor1 -pin Cable HarnessDrum KeyHi-Hat Arm (Long)10–VelcroDrum PadsCable StripsSingle Zone 8” Tom PadsSingle Zone8” Snare Mesh Drum2 Cymbal Arms (Short)S200SN8Kick PadS500PAD8SHi-Hat PedalKick Drum Pedaland TriggerFoot ControllerSD300KICKSD300HHCDrum RackDrum ModuleSD200RKS200M519274187 Simmons SD200 Owner's Manual.indd 51/21/20 11:21 AM

OWNER’S MANUALASSEMBLING YOUR KITSTEP 1 - DRUM RACKThe Drum rack will be fully assembled in the box.Remove the drum rack from the box and tightenthe connecting clamps until the kit is stable.STEP 2 - ATTACH CYMBAL ARMSInsert each cymbal arm into the rack clamp.Insert (Long) hi-hat arm on the left-side rackarm’s cymbal clamp. Slide the hi-hat armthrough the plastic sleeve to adjust the height.STEP 3 - ATTACH CYMBAL PADSPlace the cymbal pads on the tilter assembliesand press firmly to attach. Screw the cymbal nutand felt to the hi-hat arm.STEP 4 - ATTACH DRUM MODULELoosen the wing screw on the module mountlocated on the crossbar. Place the drummodule into the drum clamp. Tighten thewing screw to secure the module.619274187 Simmons SD200 Owner's Manual.indd 61/21/20 11:21 AM

SDASSEMBLING YOUR KITSTEP 5 - POSITION PEDALS & ATTACH DRUM PADSPlace the hi-hat pedal on the floor and to the left,as illustrated below. Place the bass pedal on thefloor in the center of the rack as illustrated.Loosen the wing screws on the drum mountclamps then place the tom pads into the mountsand tighten the wing screws.Place the snare drum in the mount on the lowersnare arm (next to the Hi Hat). Slide the snare padinto the clamp and tighten the wing screw.STEP 6 - CONNECT MODULE TO THE PADSUsing the provided cables, connect the ¼” jacksto the corresponding drum pads, cymbal padsand kick pad. (Cables are marked accordingly).The pin connection will attach to the multi-pinconnector of the sound module. Use cable stripsto retain cables to the rack.NOTE: The voice of the hi-hat pad is controlledby the hi-hat pedal. Similar to a real drum kit,the hi-hat pad functions as an ‘open hi-hat’when the pedal is released. When the pedal ispressed down, it functions as a ‘closed hi-hat’.719274187 Simmons SD200 Owner's Manual.indd 71/21/20 11:21 AM

OWNER’S MANUALCONNECTIONSCONNECTING THE PADSCAUTION!To prevent electric shock and damage to the device, make sure the power is switchedOFF on the sound module and all related devices before making any connection.From Sound Module to 7 PadsCymbal PadsTo CrashTo RideDrum PadsTo Tom 1To Hi-HatTo Tom 3Sound ModuleTo Tom 2To SnareTo KickTo Hi-HatControl*See Appendix for Pad, Triggers, Name and MIDI chart.819274187 Simmons SD200 Owner's Manual.indd 81/21/20 11:21 AM

SDCONNECTIONSCONNECTING THE POWER SUPPLYConnect the AC power adapter to a wall socketas shown in this illustration.CONNECTING EXTERNAL AUDIO DEVICESThe audio output from an external source canbe connected to the AUX INPUT jack on the rearpanel and mixed with the sound of the drummodule. This is ideal if you want to play alongwith songs or follow an audio drum tutorial onyour smartphone or tablet. The volume of theexternal signal is controlled on that device.AUDIODEVICE— OUTPUT —AUDIODEVICEAUDIODEVICEAUX INPUTL/MONOR— OUTPUT —AUX INPUTRL/MONORL/MONO— OUTPUT —CONNECTING USB MIDIYour drum module is USB class-compliant. Thismeans you can plug it into a USB class complianthost (such as most modern macOS, Windows,and iOS devices), and it should be recognizedimmediately. There are no drivers to install;simply plug n’ play.AUX INPUTIf you connect the drum module to a computer,you can trigger software programs or record yourperformance into a MIDI sequencing application.Check the operation and setup instructions forthe software you intend to use for more details.USB cable not included.CONNECTING HEADPHONESYour headphones can be connected to theSD200 module. The headphone jack is locatedon the front left side of module. Use the MASTERVOLUME knob to adjust the headphone volume.919274187 Simmons SD200 Owner's Manual.indd 91/21/20 11:21 AM

OWNER’S MANUALSD200 DRUM MODULE OPERATIONTOP PANEL251637481312911101Volume Knob82Kit ButtonSwitches the module to Kit Mode /- ButtonsAdjusts the current parameter on the screen9Rec/Play ButtonPlays the currently selected song, or records auser song10Click ButtonActivates the metronome click11Tempo ButtonPress to change the tempo of the metronomeor song using the /- buttons3Song ButtonSwitches the module to Song Mode4Util ButtonAccess Utility Functions5Voice ButtonPress to assign a new drum sound to the pad6Mix ButtonPress to change the volume of the selected pad127Mute ButtonMutes the drum track in the currently-playing songPower ButtonPress and release to power ON or OFF13Headphone OutputLED DISPLAYThe LED indicates the SONG, EDIT or KIT status.When SONG is selected, the song number appearsin the display. When VOICE or MIX is selected, thepad name such as Snare, Crash, and Tom, etc. willappear. Press the KIT button and the drum kitnumber will be displayed on the LED.Kit modeEdit modeSong mode1019274187 Simmons SD200 Owner's Manual.indd 101/21/20 11:21 AM

SDSD200 DRUM MODULE OPERATIONREAR PANEL1Trigger Input JacksThe included multipin cable connectsthe pads and the pedals to the module.1BACK PANEL1AC Adapter InputConnection for the included 9V DC poweradapter.2USB PortUsed for connecting the SD200 module to acomputer.3AUX InputStereo 1/8” jack to connect external audiodevices to module.4Output¼” stereo audio outputs to connect to externalaudio sources.12341119274187 Simmons SD200 Owner's Manual.indd 111/21/20 11:21 AM

OWNER’S MANUALGETTING STARTEDSWITCHING THE POWER ON1. Connect the AC Adapter to the drum module.2. Press the power switch on the front panel to turn onthe module.NOTE: There is an automatic power off function thatturns off the module when the kit is not being used fora certain period of time. The default setting is AlwaysON. You can change this setting by holding down the[KIT] button for two seconds. This will disable the autopower off function. Press and hold the [KIT] buttonagain to switch it back on.BASIC OPERATION AND NAVIGATIONThere are 3 main modes for the module KIT, SONG andUTILITY. To enter these modes press the correspondingbuttons on the top left panel of the module.1. Select the parameter to be adjusted.2. Adjust the value using [ - ] / [ ] buttons.LISTENING TO THE DEMO SONGThe demo song helps to show you the capabilitiesand sounds of the SD200KIT module. There is onedemo in the module. The demo song is a medleythat has several patterns combined to show thedifferent genres of music that the module can play.1. Press the [SONG] button to enter Song Mode.Use the [ - ] / [ ] buttons to select song d-1.2. Press the [REC/PLAY] button to start or stopthe demo.3. After stopping the demo, press any of the Modebuttons (KIT, SONG or UTILITY) to exit the DemoMode.1219274187 Simmons SD200 Owner's Manual.indd 121/21/20 11:21 AM

SDGETTING STARTEDSELECTING A KITEntering KIT Mode1. Press the [KIT] button. The LCD displays the current Kitnumber and the decimal point is in the first place aspictured to the right.2. Press the [–] / [ ] buttons to select a preset or user kit.SELECTING A SONG1. Press the [SONG] button. The LCD displays the current SongNumber and the decimal is in the last place as shown onthe right.2. Press the [–] / [ ] buttons to select the song you want to play.PLAYING A SONG1. Press [REC/PLAY] to play a song.2. Press the [REC/PLAY] button again to stop playback ofthe song.NOTE: You can temporarily change the tempo of a songwhile playback is in progress by using the [TEMPO/TAP]and [–] / [ ] buttons. The song returns to its default tempowhen a different song is selected.MUTING THE DRUM PART1. While a Song is playing press the [MUTE] button. Thiswill mute the drum sound. The screen will show themute status “On” or “Off”2. To unmute the Drums press the [MUTE] button again.1319274187 Simmons SD200 Owner's Manual.indd 131/21/20 11:21 AM

OWNER’S MANUALADVANCED OPERATIONSEDITING A KITThe drum kits of the module can be modified from thefactory presets. However to save them you will have to storethem to the User memory location. See the steps below onhow to change the parameters for each pad input.1. Press the [KIT] button.2. Press the [VOICE] button to see the current voice - thedefault is the Snare pad.3. Strike a drum pad to view the Voice currently assigned.4. Press the [ - ] / [ ] buttons to change the assigned voice.A list of drum sounds is at the end of this manual.5. Press the [MIX] button to change the volume of theselected pad.6. Press the [REC/PLAY] button to save the assignment to theUser Kit.RECORDING A SONGPress and hold the [REC/PLAY] button for 2 seconds.Recording will start after you hear one bar of metronome hits.Press [REC/PLAY] button again to stop recording. After youhave stopped recording, press the [REC/PLAY] button to playback your recording. Press the [REC/PLAY] button again tostop playback.1419274187 Simmons SD200 Owner's Manual.indd 141/21/20 11:21 AM

SDADVANCED OPERATIONSCLICK (METRONOME)The Click is the metronome. The click can be played during asong in song mode or on its own.Press [CLICK] button to start and stop the metronome.1. To change the time signature, press and hold the [CLICK]button for 2 seconds2. Press the [ - ] / [ ] buttons to select the time signature thatyou want. Available choices are: ¼, 2/4, ¾, 4/4, 6/4, 3/8, 6/8, and 12/8.3. To adjust the tempo of the click press the [TEMPO] buttonand use the [ - ] / [ ] buttons to adjust.4. You can also adjust the tempo by using the “TAP” function.Press and hold the [TEMPO/TAP] button. The LED screenwill flash the current tempo. Strike Tom 1 2-4 timesconsecutively to set the desired “TAP” tempo.UTILITY MODEThe Utility mode is for the main functions of the module suchas trigger setup for the pads, effects, MIDI setup and savingglobal settingsTRIGGER SETTINGSYou can set the parameters of each drum and cymbal pad inthe Trigger menu. While editing the settings, you can selecteach trigger by hitting the corresponding trigger pad.1. Press the [UTIL] button.2. Strike the drum pad you want to edit to view the settingcurrently assigned3. Press the UTIL button until you see the parameter you wishto change: thr: Threshold CUr:Curve r-C: Retrigger tAL: Crosstalk4. Press the [ - ] / [ ] buttons to change the parameter setting.5. After completing your settings Press the [REC/PLAY] buttonto save them.If you want to return to factory settings, perform aFactory Reset on your drum module. See page 161519274187 Simmons SD200 Owner's Manual.indd 151/21/20 11:21 AM

OWNER’S MANUALADVANCED OPERATIONSPARAMETER DEFINITIONSRetrig-C (Retrigger cancel)Retrigger Cancel prevents retriggering from occurring. Althoughsetting this to a high value prevents retriggering, it then becomeseasy for sounds to be omitted when the drums is played fast (likeduring a drum roll). Set this to the lowest value possible while stillensuring that there is no retriggering.ThresholdThis setting allows a trigger signal to be received only when thepad is struck harder than a specified force. This can be used toprevent a pad from sounding in response to peripheral vibrationsfrom another pad.MIDI NotePad36Kick38Snare – Center48Tom 1X- Talk (Pad Crosstalk)When two pads are mounted on the same stand, the vibrationproduced by hitting one pad may trigger the sound from anotherpad unintentionally, this is called crosstalk. You can avoid thisproblem by adjusting Crosstalk on the pad that is soundinginadvertently. If the value is set too high, then when two pads areplayed simultaneously, the one that is struck less forcefully willnot sound. Setting the value too low may result in crosstalk.45Tom 243Tom 346Hi Hat – Open42Hi Hat – ClosedMIDI SettingsPad MIDI Note assignmentsThe MIDI output notes from the SD200KIT are preset in themodule. The list to the right has the MIDI notes that are sent fromthe module when the drum pads and pedals are played.44Hi Hat – Pedal49Crash51RideCurve (Trigger curve)This setting allows you to control the relation between thevelocity (striking force) and changes in volume (the dynamiccurve.) Adjust this curve until the response feels as natural aspossible. If you feel like you need to hit the pads too hard tomake a sound, try setting the curve to "Esy" (easy). The valuesare: "nor" normal, "dyn" dynamic, "Esy" easy, "Fid" fixed.For more details on MIDI functionality, please see the MIDIImplementation Chart in the Appendix section of the manual.FACTORY RESETThere may be occasions where you want the module to return tothe factory settings. This function will return the module back tofactory setup.1. Power off the module2. Press and hold the [ - ] / [ ] buttons while simultaneouslypressing and holding the power button. The module displaywill read “rSt” during startup.1619274187 Simmons SD200 Owner's Manual.indd 161/21/20 11:21 AM

SDDRUM KIT PRESETSPreset Drum Kit ListDrum Sound ListKit #Kit NameSectionNumberSound NameKit 1Modern MapleKick10122x18 MapleKit 2AcrylicKick10222x18 Maple RutesKit 3GrungeKick10326x14 AcrylicKit 4Classic RockKick10424x16 Kick TunnelKit 5Hip HopKick105SDSV KickKit 6SDSVKick106Techno KickKit 7LatinKick10722x14 Gated KickKit 8UrbanKick108Hip Hop KickKit 9Gated DrumsKit 10NailsSnare20113x7 MapleKit 11Tekno / User KitSnare20214x5 LALSnare20314x5 LAL MutedSnare20414x5 MapleSong Style ListStyle #Style NameSnare20514x6.5 LBBd–1Demo SongSnare20614x5 Gated01Bonz BeatSnare207SDSV Snare02Blues BeatSnare208Techno Snare03Black MagicSnare209Hip Hop Snare04Alt RockSnare21013x7 MapleClick05Funky Strut06Hip HopTom30110" Maple07Funky DTom30210" Maple Urban08Tech StepTom30310" Maple Low09MetalheadTom30410" Gated10Jazz WalkTom30512" AcrylicTom30612" MapleTom30712" Maple LowTom30812" 90s RockTom30914" 90s Rock HiTom31014" AcrylicTom31114" 90s Rock LowTom31214" MapleTom31314" Maple LowTom31414" Maple UrbanTom31516" Acrylic1719274187 Simmons SD200 Owner's Manual.indd 171/21/20 11:21 AM

OWNER’S MANUALDRUM KIT PRESETSDrum Sound ListDrum Sound ListSectionNumberSound NameSectionNumberSound NameTom31612" GatedHi Hat512HH Open TechnoTom31718" 90s Rock HiHi Hat513HH Closed HipHopTom31818" 90s Rock LowHi Hat514HH Foot HipHopTom31916" GatedHi Hat515HH Open HipHopTom320SDSV Tom LowTom321SDSV Tom MidPercussion & Electronic601Cajon BDTom322SDSV Tom HiPercussion & Electronic602Conga OpenTom323Techno Tom LowPercussion & Electronic603Maracas ShakeTom324Techno Tom MidPercussion & Electronic604CowbellTom325Techno Tom HiPercussion & Electronic605ShakerTom32614" Maple UrbanPercussion & Electronic606Timbale HiTom327Hip Hop Tom HiPercussion & Electronic607Timbale LowTom328Hip Hop Tom MidPercussion & Electronic608TumbaTom329Hip Hop Tom LowPercussion & Electronic609ClavePercussion & Electronic610Steel SwarmCymbal40116" Crash PPercussion & Electronic611Terror StrikeCymbal40218" Crash ZPercussion & Electronic612Nasty KickCymbal40324" Ride PPercussion & Electronic613Eat BrainCymbal40420" Ride ZPercussion & Electronic614Pic AnimalCymbal405SDSV CymbalPercussion & Electronic615Gravel BubblesCymbal406Techno CymbalPercussion & Electronic616Distort RingerCymbal40708 CrashPercussion & Electronic617Bass Rattle MidCymbal40878 CymbalPercussion & Electronic618Bass Rattle LowPercussion & Electronic619Bass Rattle HiHi Hat501HH Closed PPercussion & Electronic620SDSV CymbalHi Hat502HH Foot PPercussion & Electronic621Techno CymbalHi Hat503HH Open PPercussion & Electronic622SDS7 HH FootHi Hat504HH Closed ZPercussion & Electronic623DrumsticksHi Hat505HH Foot ZHi Hat506HH Open ZHi Hat507HH Foot SDSVHi Hat508HH Open SDSVHi Hat509HH Closed SDSVHi Hat510E HH ClosedHi Hat511HH Closed Techno1819274187 Simmons SD200 Owner's Manual.indd 181/21/20 11:21 AM

SDMIDI IMPLEMENTATION CHARTO: YES X: Memorized10 CH Only1-16 CHChannel ChangedX1-16 CHModeDefaultMode 3Mode 3MessagesXXAltered**************XNote0 1270 127Number: True voice**************0 127VelocityNote ONO (99H, V 1–127)O (9nH, V 1–127)Note OFFO (89H, V 0)O (8nH, V 0) or 8nHAftertouchXXPitch BenderXO0, 32XOBank Select1XOModulation5XOPortamento Time6XOData EntryControl OPortamento66XOSostenuto67XOSoft Pedal80, 81XODSP TYPE91, 93XODSP DEPTH100, 101XO (*1)RPN LSB, MSB121XOReset all ControllersO 0-10O 0-127Program Change:True member0-127System ExclusiveSystem Common Song PositionXXXSong SelectXXTuneXXSystem Real Time ClockAux MessagesXXXCommandsXXLocal ON/OFFXXAll Notes OFF is sent asAll Notes OFFXOAll Sound OFF (CC# 120)Active SenseXXResetXO*1: Registered parameter number: #0: Pitch sensitivity,#1: Fine tuning, #2: Coarse tuningMode 1: OMNI ON, POLYMode 2: OMNI ON, MONOMode 3: OMNI OFF, POLYMode 4: OMNI OFF, MONO1919274187 Simmons SD200 Owner's Manual.indd 191/21/20 11:21 AM

OWNER’S MANUALSPECIFICATIONSPads7 drum pads with touch response and two pedals for bass drum and hi-hatSounds93 drum voicesDrum Kits10 Preset kits, 1 User kitSongs10 Preset songs, 1 User songOverall ControlsTempo, Main VolumeMetronomeClickConnections9V adapter, headphones, USB to host (MIDI IN/OUT), aux input, stereo out, serial pin connectorDimensions37” (H) x 27” (W) x 10” (L)Weight37 lbsPower Supply9V adapterAccessoriesDrum sticks, drum key, velcro cable straps, user manualWARRANTYTwo (2) Years limited warrantySubject to the limitations set forth below, Simmons herebyrepresents and warrants that the components of this product shallbe free from defects in workmanship and materials, includingimplied warranties of merchantability or fitness for a particularpurpose, subject to normal use and service, for two (2) years to theoriginal owner from the date of purchase.Retailer and manufacturer shall not be liable for damagesbased upon inconvenience, loss of use of product, loss of time,interrupted operation or commercial loss or any other incidentalor consequential damages including but not limited to lost profits,downtime, goodwill, damage to or replacement of equipmentand property, and any costs of recovering, reprogramming, orreproducing any program or data stored in equipment that is usedwith Simmons products. This guarantee gives you specific legalrights. You may have other legal rights which vary from state tostate. Some states do not allow limitations on how long an impliedwarranty lasts, so the above limitation may not apply to you.FCC STATEMENT1. Caution: Changes or modifications to this unit not expresslyapproved by the party responsible for compliance could void theuser’s authority to operate the equipment.2. Note: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more ofthe following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a different circuit.SimmonsP.O. Box 5111 Thousand Oaks, CA 91359-5111All trademarks and registered trademarks mentioned herein arerecognized as the property of their respective holders.MISSINGdamagedparts?CALL888-621-4008TOLL FREEassemblyquestions?OR VISIT OUR WEBSITE AT: simmonsdrums.net2019274187 Simmons SD200 Owner's Manual.indd 201904-192741871/21/20 11:21 AM

Place the snare drum in the mount on the lower snare arm (next to the Hi Hat). Slide the snare pad into the clamp and tighten the wing screw. STEP 6 - CONNECT MODULE TO THE PADS Using the provided cables, connect the ¼" jacks to the corresponding drum pads, cymbal pads and kick pad. (Cables are marked accordingly).