Transcription

Update Pulse Secure SSL VPNBelow are the steps you need to perform to update or reconfigure the Pulse Secure Client Application installed on your endpoint device.!If you already have the Pulse Secure Client Version “9.1.12” installed, you can jump directly to page 7 “Reconfiguring the PulseSecure Desktop Client” where you reconfigure the installed client to support MFA.aStep 1: Check version1Launch the Software Center application by typing "Software Center" in the Windows search bar on your PC.For internal use only

Update Pulse Secure SSL VPNaStep 1: Check version2Check the version by filtering for "Pulse" on the Applications tab. Now see if the first numbers of the version match "9.1.12". If the version is notinstalled, an update of the application is required.For internal use only

Update Pulse Secure SSL VPNaStep 2: Update Pulse Secure VPN - MFA1Find the application by typing "Pulse Secure VPN - MFA" in thetop-right corner in the search and open it by clicking on theapplication icon.2Now click on "Install".For internal use only

Update Pulse Secure SSL VPNaStep 2: Update Pulse Secure VPN - MFA3Depending on the Pulse Secure version you have configured,you may be prompted to close all open browsers. In this case,please click the “Continue" button.4You may be prompted to close application windows. Youcan defer this message three times until the installation iscarried out automatically. Please click “Continue" here.For internal use only

Update Pulse Secure SSL VPNaStep 2: Update Pulse Secure VPN - MFA5Wait until the installation is complete. This will remove theexisting version of the application and install the latest PulseSecure SSL VPN client.6Click "OK" when the message "Pulse Secure Application Launcherwas successfully installed" appears.For internal use only

Update Pulse Secure SSL VPNaStep 2: Update Pulse Secure VPN - MFA7Once the installation is complete, the status will show "Installed".For internal use only

Update Pulse Secure SSL VPNaStep 3: Reconfiguring the Pulse Secure Desktop Client1Please search "Pulse Secure Configuration Changer" andselect the application by clicking on it.2Now click on "Install".The Installation will launch. Depending on your configuration popups may occur to close browser applications. There is no deferral – but apersistent prompt.Wait for Software Center to notify for completing the installation. Depending on how many packages need to be changed you will be notified toperform a clean device reboot.For internal use only

Update Pulse Secure SSL VPNaStep 3: Reconfiguring the Pulse Secure Desktop Client3Then open the Pulse Secure Desktop Client.4Your onboarding was successful once the server URL is"remote.rhenus.com". To expand, click the small arrow icon withinthe Pulse Secure Desktop application. Your client must look like this:Congratulations! Your Pulse Secure client can now support MFA.For internal use only

Update Pulse Secure SSL VPN For internal use only a Step 1: Check version Below are the steps you need to perform to update or reconfigure the Pulse Secure Client Application installed on your endpoint device. 1 Launch the Software Center application by typing "Software Center" in the Windows search bar on your PC. If you already have the Pulse Secure Client Version "9.1.12" installed, you .