mopdf.com

Roofing Fasteners Range

MSL is New Zealand’s premier fastener supplier with branches nationwide. Established in 1980, it has become the largest distributor of fasteners, including bolts & nuts,rivets, coach screws, machine screws, washers, threaded rods, self drilling screws,chipboard screws, hinges and socket products – in all materials and finishes.All self drilling screws are manufactured strictly to international standards including AS/NZ 3566. All screws are made with a distinctive “F4” head marking, recognised as the “Fortress Class 4” to meetthe harshest of NZ environmental conditions.

ContentsRoofing Fasteners SpecificationsRoofing Range1–2Sealing Washer Range3Hex Head Fasteners with Neo Washer4Supadrive 12g Plus Fasteners with Neo Washer5Self Drilling Fasteners with optional Neo Washer6–7Countersunk Wing Fasteners8Bugle Head Batten Fasteners9Wafer Head Square Drive Fasteners10Profile Washers and Hand Tools10Locations11

Roofing Fasteners SpecificationsSELF DRILLING SCREW POINTSFASTENER DESCRIPTIONSometimes referred to as Teks, SDS or SDM. Used for drilling into thin steel usually from1.5mm to 6.4mm thick.FOR EXAMPLEType 1712-14x55HWF12341 The first number is the fastener gauge.2 The second number is the number of threads per inch – coarse or fine.3 The third number is the length of the fastener – the “working area”.4 HWF: Hex Washer Face – refers to the type of head most common, incorporatinga built in washer under the hex.FASTENER GAUGEThe fastener gauge is the major diameter or outside thread thickness of the screw.6g 3.5mm8g 4.2mm10g 4.8mm1 12g 5.5mm14g 6.3mmMetal self drillersSharp point with a cut in the tip flutes specifically for drilling into timber or through thinsteel up to 0.75mm. Ideal for screwing roofing to timber frames, purlins or battens.Wing screwsMetal self drilling screws with added wings are used to penetrate timber and clear a pilothole first before breaking off as the screw goes into a steel substrate. Ideal for fixing plyto steel frames.SUPADRIVE Fortress trade marked for universal use where the screws will drill into and through somesteel and timber. Ideal for roofing and cladding applications and fixing to steel or timberprofiles. The shortened self drilling point allows drilling through steel up to 1.9mm thick.SELF DRILLING TEST RESULTSAS3566 MINIMUM AXIALFORCE FOR WITHDRAWALTEST RESULT kNSelf Drilling to timber2.84.14Self Drilling to steel2.85.01Supadrive Self Drilling to timber2.84.14Supadrive Self Drilling to steel2.88.58 Tested by an independent New Zealand Laboratory. All screws conformed to AS3566-1-2002Hex, pan and wafer heads measure from under the head to the tip of the screw.Countersunk, bugle and self embedding are all measured from the top of thehead to the tip.PA G E1PPR OVED3 The fastener is measured as the total length of penetration or the “working area”.AFASTENER LENGTHGUARANTEEQUALIT YFortress Roofing Fastenerscarry a 15 year warrantywww.fortressfasteners.co.nz

Roofing Fasteners Specifications (continued)CORROSION RESISTANCEGUARANTEEAll Fortress Roofing Fasteners are coated with Class 4 Mechanical plated zinc/tincomposition, produced in Australia to meet AS3566 Part 2-2002.All Fortress Roofing Fasteners used for roofing and cladding applications have beencoated to Class 4 specifications as shown in AS3566.2-2002.CLASSIFICATION AND DESIGNATION OF CORROSION RESISTANCECLASSATMOSPHERE OF INTENDED USEAll roofing fasteners carry a 15 year warranty, however a roof and its fasteners requireregular cleaning to help prevent damage and build up of corrosive environmentalmatter. It is recommended that manual washing be performed every 3 months for highrisk areas such as coastal regions.1General use in internal application.2General use and external where moderate condensation occurs.For further information or assistance please ask your local Fortress Fastenersrepresentative.3External use in mild, or moderate industrial areas. Corrosivity category C2 andC3 in accordance with ISO 9223.COLOUR RANGE4External use in severe marine environment. Corrosivity category C4 classifiedin accordance with ISO 9223.All Fortress Roofing Fasteners are available in the different colours offered by steelmanufacturers in New Zealand, such as Colorsteel, Diamond and BHP.EXAMPLES: Thunder Grey, Smokey, Maple, Titania, Ironsand, Karaka, Lignite,Grey Friars, Permanent Green, Desert Sand, Bone White, Gull Grey.EXTRACT FROM AS3566:2-2002MINIMUMPOROSITY RATINGMINIMUMTHICKNESS (UM)COATING TYPE2617Mech plated zinc3825Mech plated zinc/tin3840Mech plated zinc4845Mech plated zinc/tinwww.fortressfasteners.co.nzPPR OVEDCORROSIONRESISTANCE CLASSAREQUIREMENTS FOR ZINC AND TIN ZINC COATED FASTENERSGUARANTEEQUALIT YFortress Roofing Fastenerscarry a 15 year warrantyPA G E2

Sealing Washer RangeFORTRESS FASTENERS ARE DISTRIBUTORS OF:DEKS washers offer greater thickness and secure sealing.DEKSEAL ENGINEEREDNEOFULLY MOULDEDFLUTED AND SMOOTHA customised range designed to suit specific materials includingmetal, fibreglass and plastic – each washer has been designed toensure weather-tightness of specific roofing systems.Offering both consistency and longevity, Neo washers come in2 styles to suit your assembly process and application needs.The blue marking on the washer ensures it is authentic.NON-CONDUCTIVE – low carbon prevents corrosion problems.Engineered for precision – for a consistent fit and performance.Weather-tight fit every time – designed to stay strong.Superior quality EPDM – made to last.Four styles – to suit a range of applications.Fast assembly – quick to fit, stays in place during transportation. 2 sealing locations Adequate cushioning Wind-uplift resistance Allows slippage for sheet movement NON-CONDUCTIVE Eliminates metal to metal contactUV and ozone resistant – maximum life span in harsh evironments.SMOOTHFLUTED Ideal for machine assembly Ideal for machine and hand assembly Consistent fit every time Consistent, tight fit every time Available in 8, 10, 12 and 14g Easy to fit – stays in placeDEKFAST MULTI-SEALMETAL BACKEDA unique washer design that forms a seal against the washer faceof the fastener as well as the roof sheet. The design is self-aligningensuring that even if the fastener is driven at an angle, the washerseals effectively in all 4 locations.Extra strength – metal encapsulated in EPDM for real strength.Four sealing points – unique design gives a perfect seal. Wide size range No distortion Imperfect installation – perfect seal 4 sealing locations Improved cushioning Improved wind-lift resistance Allows slippage for sheet movement Eliminates metal to metal contact High vibrational resistance NON-CONDUCTIVENo distortion – engineered to distribute the loadPA G E3www.fortressfasteners.co.nz

Hex Head Fasteners with Neo washerFor fixing to timberCLASS 4Part No.DescriptionScrew Threads lengthGauge Per Inch OF SCREWWasherTypeQuantity Per PackTT1225NC412 x 25 HEX WF T17 W/NEO CL:4121125Neo200/1000TT1235NC412 x 35 HEX WF T17 W/NEO CL:4121135Neo200/1000TT1240NC412 x 40 HEX WF T17 W/NEO CL:4121140Neo200/1000TT1245NC412 x 45 HEX WF T17 W/NEO CL:4121145Neo200/1000TT1250NC412 x 50 HEX WF T17 W/NEO CL:4121150Neo200/1000TT1255NC412 x 55 HEX WF T17 W/NEO CL:4121155Neo200/1500TT1265NC412 x 65 HEX WF T17 W/NEO CL:4121165Neo100/1000TT1265NEO14A12 x 65 HEX WF T17 W/BONDED WASHER CL:412116525mm Bonded100/500TT1275NC412 x 75 HEX WF T17 W/NEO CL:4121175Neo100/500TT1425NC414 x 25 HEX WF T17 W/NEO CL:4141025Neo100/500TT1450NC414 x 50 HEX WF T17 W/NEO CL:4141050Neo100/500TT1465NC414 x 65 HEX WF T17 W/NEO CL:4141065Neo100/500TT1475NC414 x 75 HEX WF T17 W/NEO CL:4141075Neo100/500TT1490NC414 x 90 HEX WF T17 W/NEO CL:4141090Neo100/500TT14100NC414 x 100 HEX WF T17 W/NEO CL:41410100Neo100/500TT14115NC414 x 115 HEX WF T17 W/NEO CL:41410115Neo100/500TT14125NC414 x 125 HEX WF T17 W/NEO CL:41410125Neo100/500TT14150NC414 x 150 HEX WF T17 W/NEO CL:41410150Neo100/500BITHEXSOC5165/16 x 65 HEX SOCKET BIT––––1BITHEXSOC5161505/16 x 150 HEX SOCKET BIT––––1BITHEXSOC383/8 x65 HEX SOCKET BIT––––1BITHEXSOC381503/8 x 150 HEX SOCKET BIT––––1www.fortressfasteners.co.nzPA G E4

Supadrive 12g Plus Fastener with Neo washerFor fixing to steel or timberCLASS 4Part No.DescriptionScrewGaugeThreads lengthPer Inch OF SCREWWASHERTYPEQuantity Per PackSD1255NC412g Plus–13 x 55 HEX W/F SUPADRIVE W/NEO12 Plus1355Neo200/1500SD1265NC412g Plus–13 x 65 HEX W/F SUPADRIVE W/NEO12 Plus1365Neo100/1000BITHEXSOC5165/16 x 65 HEX SOCKET BIT––––1BITHEXSOC5161505/16 x 150 HEX SOCKET BIT––––1Supadrive Fortress trade marked for universal use where the screws will drill into and through some steel and timber. Ideal for roofing and claddingapplications and fixing to steel or timber profiles. The shortened self drilling point allows drilling through steel up to 1.9mm thick.PA G E5www.fortressfasteners.co.nz

Self Drilling Fasteners with optional Neo washerFor fixing to steelCLASS 4Part No.DescriptionScrew Threads length Washer Quantity Gauge Per Inch OF SCREWTypePer PackTK812C48–18 x 12 HEX W/F TEK NO NEO CL:481812–200TK816C48–18 x 16 HEX W/F TEK NO NEO CL:481816–200TK1016NC410–16 x 16 HEX W/F TEK WITH NEO CL:4101616Neo200TK1025NC410–16 x 25 HEX W/F TEK WITH NEO CL:4101625Neo200TK122024NC412–24 x 20 HEX W/F TEK WITH NEO CL:4122420Neo200/1000TK1220NC412–14 x 20 HEX W/F TEK WITH NEO CL:4121420Neo200/1000TK122510NC412–14 x 25 HEX W/F METAL TEK WITH NEO CL:4(10g head) CLADDING121425Neo200/1000TK122524NC412–24 x 25 HEX W/F TEK WITH NEO CL:4122425Neo200TK1225NC412–14 x 25 HEX W/F TEK WITH NEO CL:4121425Neo200TK1235NC412–14 x 35 HEX W/F TEK WITH NEO CL:4121435Neo200TK1245NC412–14 x 45 HEX W/F TEK WITH NEO CL:4121445Neo200TK1255NC412–14 x 55 HEX W/F TEK WITH NEO CL:4121455Neo200/1500TK1265NC412–14 x 65 HEX W/F TEK WITH NEO CL:4121465Neo100/1000TK1275NC412–14 x 75 HEX W/F TEK WITH NEO CL:4121475Neo100/1000www.fortressfasteners.co.nzPA G E6

Self Drilling Fasteners with optional Neo washer (continued)For fixing to steelCLASS 4Part No.DescriptionScrew Threads length Washer Quantity Gauge Per Inch OF SCREWTypePer PackTK1422NC414–20 x 22 HEX W/F TEK WITH NEO CL:4142022Neo200TK1475NC414–10 x 75 HEX W/F TEK WITH NEO CL:4141075Neo100TK1490NC414–10 x 90 HEX W/F TEK WITH NEO CL:4141090Neo100TK1495NC414–10 x 95 HEX W/F TEK WITH NEO CL:4141095Neo100TK14115NC414–10 x 115 HEX W/F TEK WITH NEO CL:41410115Neo100TK14135NC414–20 x 135 HEX W/F TEK WITH NEO CL:41420135Neo100TK14150NC414–10 x 150 HEX W/F TEK WITH NEO CL:41410150Neo100TK14175NC414–10 x 175 HEX W/F TEK WITH NEO CL:41410175Neo100TK14250NC414–10 x 250 HEX W/F TEK WITH NEO CL:41410250Neo100BITHEXSOC141/4 x 45 HEX SOCKET BIT8–––1BITHEXSOC5165/16 x 65 HEX SOCKET BIT10, 12–––1BITHEXSOC5161505/16 x 150 HEX SOCKET BIT10, 12–––1BITHEXSOC383/8 x 65 HEX SOCKET BIT14–––1BITHEXSOC381503/8 x 150 HEX SOCKET BIT14–––1PA G E7www.fortressfasteners.co.nz