Transcription

Binks MACH 1 PCX HVLPSPRAY GUN(For Plural Component Catalyst Injection)ReplacesPart Sheet77-2687R-2PartSheet77-2687R-3

InIn thisthis partpart sheet,sheet, thethe wordswords WARNING,WARNING, CAUTIONCAUTION andand NOTENOTE areare usedused toto emphasizeemphasize importantimportant safetysafety informationinformation asas follows:follows:!!WARNINGWaRninGHazardsHazards oror unsafeunsafe practicespractices whichwhich couldcouldresultinseverepersonalinjury,result in severe personal injury, deathdeath ororsubstantialsubstantial propertyproperty damage.damage.!!CautionCautionHazardsHazards oror unsafeunsafe practicespractices whichwhich couldcouldresultinminorpersonalinjury,result in minor personal injury, productproductoror propertyproperty damage.damage.!!NOTEnotEImportantImportant installation,installation, operationoperation orormaintenanceinformation.maintenance information.WarningReadRead thethe followingfollowing warningswarnings beforebefore usingusing thisthis equipment.equipment.REAd THE MANUAlBefore operating finishing equipment, read and understand allsafety, operation and maintenance information provided in theoperation manual.NEvER MOdIfy THE EqUIPMENTDo not modify the equipment unless the manufacturer provideswritten approval.WEAR SAfETy GlASSESFailure to wear safety glasses with side shields could result inserious eye injury or blindness.kNOW WHERE ANd HOW TO SHUT Off THE EqUIPMENT IN CASEOf AN EMERGENCydE-ENERGIzE, dEPRESSURIzE, dISCONNECT ANd lOCk OUT AllPOWER SOURCES dURING MAINTENANCEFailure to De-energize, disconnect and lock out all powersupplies before performing equipment maintenance could causeserious injury or death.PRESSURE RElIEf PROCEdUREAlways follow the pressure relief procedure in the equipmentinstruction manual.OPERATOR TRAININGAll personnel must be trained before operating finishingequipment.NOISE HAzARdYou may be injured by loud noise. Hearing protection may berequired when using this equipment.EqUIPMENT MISUSE HAzARdEquipment misuse can cause the equipment to rupture,malfunction, or start unexpectedly and result in serious injury.STATIC CHARGEFluid may develop a static charge that must be dissipated throughproper grounding of the equipment, objects to be sprayed and allother electrically conductive objects in the dispensing area. Impropergrounding or sparks can cause a hazardous condition and result infire, explosion or electric shock and other serious injury.kEEP EqUIPMENT GUARdS IN PlACEDo not operate the equipment if the safety devices have beenremoved.fIRE ANd ExPlOSION HAzARdNever use 1,1,1-trichloroethane, methylene chloride, otherhalogenated hydrocarbon solvents or fluids containing suchsolvents in equipment with aluminum wetted parts. Such usecould result in a serious chemical reaction, with the possibility ofexplosion. Consult your fluid suppliers to ensure that the fluidsbeing used are compatible with aluminum parts.PROjECTIlE HAzARdYou may be injured by venting liquids or gases that are releasedunder pressure, or flying debris.TOxIC flUId & fUMESHazardous fluid or toxic fumes can cause serious injury or death ifsplashed in the eyes or on the skin, inhaled, injected or swallowed.LEARN and KNOW the specific hazards or the fluids you are using.PINCH POINT HAzARdMoving parts can crush and cut. Pinch points are basically anyareas where there are moving parts.AUTOMATIC EqUIPMENTAutomatic equipment may start suddenly without warning.WEAR RESPIRATORToxic fumes can cause serious injury or death if inhaled. Wear arespirator as recommended by the fluid and solventmanufacturer’s Material Safety Data Sheet.CA PROP65PROP 65 WARNINGWARNING: This product contains chemicals known to theState of California to cause cancer and birth defects or otherreproductive harm.INSPECT THE EqUIPMENT dAIlyInspect the equipment for worn or broken parts on a daily basis.Do not operate the equipment if you are uncertain about itscondition.IT IS THE RESPONSIBIlITy Of THE EMPlOyER TO PROvIdE THIS INfORMATION TO THE OPERATOR Of THE EqUIPMENT.2fOR fURTHER SAfETy INfORMATION REGARdING BINkS ANd dEvIlBISS EqUIPMENT, SEE THEGENERAl EqUIPMENT SAfETy BOOklET (77-5300).

Binks MACH 1 PCX HVLP SPRAY GUN3

Binks MACH 1 PCX HVLP SPRAY GUN4

Binks MACH 1 PCX HVLP SPRAY GUN5

Binks MACH 1 PCX HVLP SPRAY GUN6

Binks MACH 1 PCX HVLP SPRAY GUN7

Binks MACH 1 PCX HVLP SPRAY GUN8

Binks MACH 1 PCX HVLP SPRAY GUN9

Binks MACH 1 PCX HVLP SPRAY GUN10

NOTES11

WARRANTYThis product is covered by Binks’ 1 Year Limited Warranty.Binks Sales and Service: www.binks.comU.S.A./Canada Customer Service195 Internationale Blvd.Glendale Heights, IL 60139630-237-5000Toll Free Customer Serviceand Technical Support800-992-465777-2687R-3 Revisions: Trademark updates;(P12) Updated contact information.Toll Free Fax888-246-57323/13 2013 Binks All rights reserved. Printed in U.S.A.

Binks MACH 1 PCX HVLP SPRAY GUN (For Plural Component Catalyst Injection) Replaces Part Sheet 77-2687R-2 Part Sheet 77-2687R-3! Warning In this part sheet, the words WARNINGC