mopdf.com

06 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetKeysight 82350C High Performance PCI-GPIB Interface Card [NEW]Features– PCI IEEE-488 interface for PCs– Transfer rates up to 900 KB/s– Dual processor support on the latestWindows operating systemBest for– Maximum GPIB throughput for allconigurations– Standard and low-proile bracketsallow lexible connectionPowerful performance forautomation or manufacturingtest applicationThe 82350C PCI-GPIB interface cardconverts any PCI bus computer intoan instrumentation control and dataacquisition system. It comes withdirect PCI computer connection, andtransaction overhead is minimized for thebest overall operating performance.The 82350C interface card is fullycompatible with IEEE-488 control andcommunication standard, de-couplesGPIB transfers from PCI bus transfers.Buffering provides I/O and systemperformance that is superior to directmemory access (DMA). The hardware issoftware conigurable and compatiblewith the plug-and-play standard for easyinstallation. The GPIB interface cardoffers high lexibility to plug into standardor low proile PC with a bracket change.82350C with standard proile bracket82350C with low-proile bracket82350C technical speciicationsGeneral requirementsMinimum systemRefer to page 4 for requirements in using the Keysight IO Librariesrequirementssoftware (included with the instrument control hardware)Software requirementsKeysight IO Libraries Suite version 17.0 onwardsPCI bus slotUniversal 3.3 V and 5 V PCI slot, 32 bitsSupported standardsPCI rev 2.1, IEEE 488.1 and IEEE 488.2 compatibleGeneral characteristicsPowerBackplane 3.3 V or 5 V PCIConnectors– Standard 24-pin IEEE-488 (GPIB)– Universal 3.3 V & 5 V PCIMaximum data rate900 KB/sMaximum instrument14 instruments - daisy chain via GPIBconnectionBufferingBuilt-inConigurationPlug and playEMCIEC 61326-1:2005/EN61326-1:2006Warranty1 yearDimensionLength, width and height156 mm (L) X 121 mm (W) X 21.6 mm (H)Weight0.072 kgEnvironmental speciicationsOperating environment–5 C to 60 COperating humidityUp to 90% at 40 C non condensingStorage environment–40 C to 70 CStorage humidityUp to 90% at 65 C non condensingOrdering informationIncludesKeysight Instrument Control DVD, Low proile bracket, Quick startposter

07 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetKeysight 82351B High Performance PCIe-GPIB Interface Card [NEW]Features– High transfer rate of 1.4 MB/s– High lexibility via up-plugging (to x4or x8 PCIe slots)– 3.3 V signal level for lower powerconsumptionBest for– Bandwidth-intensive testapplications– Standard and low-proile bracketsallow lexible connectionFaster data transfer speed forhigh-throughput testapplicationThe 82351B PCIe-GPIB interfacecard offers the fast data transfer rateassociated with PCIe to support highbandwidth PC applications, ensuringthat data is consistently retained withoutbeing overwritten during the transfer tomemory.PCIe is the next generation of PCIand offers unsurpassed speed andperformance, making PCIe cards an idealchoice for many computer platformsand automation applications. It isfull backward compatible with PCIconigured software or coding, removingthe need to reconigure any code. The82351B is highly lexible with plug-andplay coniguration and enables usage in alow-proile PC with a bracket change.82351B with standard proile bracket82351B with low-proile bracket82351B technical speciicationsGeneral requirementsMinimum systemRefer to page 4 for requirements in using the Keysight IO Librariesrequirementssoftware (included with the instrument control hardware)Software requirementsKeysight IO Libraries Suite version 17.0 onwardsPCI bus slot3.3 V PCI slot, 32 bitsSupported standards– PCIe rev 1.0a– IEEE-488.1 and IEEE-488.2 compatibleGeneral characteristicsPowerBackplane 3.3 V PCIeConnectors– Standard 24-pin IEEE-488 (GPIB)– 3.3 V PCIeMaximum data rate1.4 MB/sMaximum instrument14 instruments - daisy chain via GPIBconnectionBufferingBuilt-inConigurationPlug and playEMCIEC 61326-1:2005/EN61326-1:2006Warranty1 yearDimensionLength, width and height156 mm (L) X 121 mm (W) X 21.6 mm (H)Weight0.074 kgEnvironmental speciicationsOperating environment–5 C to 60 COperating humidityUp to 90% at 40 C non condensingStorage environment–40 C to 70 CStorage humidityUp to 90% at 65 C non condensingOrdering informationIncludesKeysight Instrument Control DVD, Low proile bracket, Quick startposter

08 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetKeysight 82350B High Performance PCI-GPIB Interface CardFeatures– PCI IEEE-488 interface for PCs– Transfer rates up to 900 KB/s– Dual processor support on the latestWindows operating systemBest forMaximum GPIB throughput for allconigurationsHigh performance formanufacturing test applicationsThe 82350B is Keysight’s highestperformance GPIB interface. With a directPCI computer connection, transactionoverhead is minimized for the best overallperformance.The 82350B card de-couples GPIBtransfers from PCI bus transfers.Buffering provides connectivity andsystem performance that is superiorto direct memory access (DMA). Thehardware is software-conigurable andcompatible with the plug-and-playstandard for easy hardware installation.The GPIB interface card plugs into a 5 voltPCI slot in the backplane of your PC.This traditional GPIB connection still offers the highest throughput82350B technical speciicationsGeneral requirementsMinimum systemRefer to page 4 for requirements in using the Keysight IO Librariesrequirementssoftware (included with the instrument control hardware)PCI bus slot5-V PCI slot, 32 bitsSupported standardsIEEE 488.1 and IEEE 488.2 compatible, PCI rev 2.1General characteristicsPowerBackplane 5 V PCIConnectors– Standard 24-pin IEEE-488 (GPIB)– 5 V PCIMaximum data rate900 KB/sMaximum instrument14 instruments—daisy chain via d-playEMC and safety– IEC 61326-1: Group 1, Class A– IEC 61010-1Warranty1 yearDimensionsLength, width, and height122 mm (L) x 122 mm (W) x 22 mm (H) (a full-height PCI card)Weight0.091 kgEnvironmental speciicationsOperating environment0 C to 55 COperating humidityUp to 90% at 40 C non-condensingStorage environment–40 C to 70 CStorage humidityUp to 90% at 65 C non-condensingOrdering informationIncludesKeysight IO Libraries Suite and VISA/SICL programming manualson CD-ROMAccessoriesGPIB cables/adapter (see page 12)

09 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetKeysight 82351A High Performance PCIe-GPIB Interface CardFeatures– Compact half-height size (68.9 mm)– High transfer rate of 1.4 MB/s– High lexibility via up-plugging(to x4 or x8 PCIe slots)– 3.3 V signal level for lower powerconsumptionBest forNew standard for high-speed internal devices– Bandwidth-intensive PC applications– Adding GPIB connection for PCIebased PCs or workstationsHigh transfer rate fordemanding test applicationsThe Keysight 82351A PCIe-GPIB interfacecard is designed for integration intonext generation PCs or workstations.It offers fast data transmission forvarious demanding test applicationsthat require data to be transferred tomemory fast enough without any lossor overwriting. PCIe (PCI Express) is anevolutionary version of PCI that offers ahigher transfer rate across a low numberof wires. It is also backward-compatiblewith PCI software, so you don’t need toperform any code re-coniguration. Thepowerful bus architecture of PCIe allowsbidirectional data transmission, and theimplementation of a new class of testapplications.82351A technical speciicationsGeneral requirementsMinimum systemRefer to page 4 for requirements in using the Keysight IO Librariesrequirementssoftware (included with the instrument control hardware)PCI bus slot3.3 V PCIe slot, 32 bitsSupported standards– PCIe rev. 1.0a– IEEE 488.1 and IEEE 488.2 compatibleGeneral characteristicsPowerBackplane 3.3 V PCIeConnectors– Standard 24-pin IEEE-488 (GPIB)– 1.5 V PCIeMaximum data rate1.4 MB/sMaximum instrument14 instruments—daisy chain via d-playEMC and safety– IEC 61010-1: 2001/EN61010-1: 2001– IEC 61326: 2002/EN61326: 1997 A1: 1998 A2: 2001 A3:2003– Pollution Degree 2– Indoor use onlyWarranty1 yearDimensionsWidth, depth, and height120.8 mm (W) x 158.0 mm (D) x 21.6 mm (H)Weight0.082 kgEnvironmental speciicationsOperating environment–5 C to 60 COperating humidityUp to 90% at 40 C non-condensingStorage environment–40 C to 70 CStorage humidityUp to 90% at 65 C non-condensingOrdering informationIncludesKeysight IO Libraries Suite and VISA/SICL programming manualson CD-ROMAccessoriesGPIB cables/adapter (see page 12)

10 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetKeysight E5810B LAN/GPIB/USB GatewayFeatures– Remote access and control of GPIB,USB and RS-232 instruments– Faster GPIB transfer rate of up to1.2 MB/s– Supports 1000BASE-T (1 Gigabit)/100BASE-TX/10BASE-T LAN/Ethernet connection– Power switch for hard reset– Password-protected web interfacefor coniguration– LCD display for easy setup and useBest for– Connection to GPIB, USB and RS-232instrumentation– Shared test systemsOne-box connectivity solution—now with USB capabilityThe E5810B is the next generation ofthe E5810A and expands the gateway’scapability to include USB connectivity.The E5810B connects up to 14 GPIBinstruments, up to four USB instrumentsvia a self-powered hub and an RS-232instrument, giving test engineers a fastand eficient one-box solution to controlvarious instrument interfaces over LAN,even remotely via wireless connection.The E5810B’s versatility makes it idealfor system integrators, manufacturingtesting, automated testing and otherapplications requiring an unlimitedconnection range and simultaneousconnectivity to multiple instruments, bothlocally and remotely.The E5810B is the next generation of the E5810A and provides a gateway between networked-equippedcomputer systems (using LAN) and GPIB/USB/RS-232 instruments.High transfer rates enhance performanceWith an improved GPIB transfer rate of 1.2 MB/s, test engineers can reduce testtime and improve production throughput. The E5810B also features 1000BASE-T (1Gigabit) LAN/Ethernet compatibility in addition to existing 100BASE-TX and 10BASE-Tsupportability to meet the demands of higher network bandwidth. This will also allowoptimal data transfer rates when a USB 2.0 instruments is connected to the IO interface.Conigure your instrument via the LCD displayWith the E5810B’s built-in LCD display, users can quickly retrieve the IP address of thegateway and other system messages without needing to install additional software.The E5810B also comes with LED indicators on the front panel display, allowing usersto determine the connection statuses of the gateway box at a glance. The greenindicators cover LAN connection, GPIB, USB or RS-232 instrument activity and whetherthe gateway is powered on, while a lit red FAULT indicator points to possible hardwarefailure.Perform wireless communicationThe E5810B enables wireless communication to instruments where LAN connection isunavailable or inconvenient by connecting a wireless router to the E5810B.Safeguard information with security functionsThe E5810B comes with protection features to safeguard sensitive information, requiringa secure password to access and modify all web coniguration pages, while the secureerase feature is a standard product feature in all Keysight equipment that will erase thesystem’s preset and data information. Press the preset button on the E5810B’s frontpanel to erase data information securely.

11 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetKeysight E5810B Technical SpeciicationsGeneral requirementsMinimum system requirementsSupported standardsGeneral characteristicsPower consumptionConnectorsMaximum data ratesMaximum instrument connectionLED indicatorsEMC and safetyWarrantyNetwork protocolsDimensionsWidth, depth and heightWeightEnvironmental speciicationsOperating environmentStorage environmentOrdering informationStandard shipped accessoriesOptionsRefer to page 4 for requirements in using the Keysight IO Libraries software (included with theinstrument control hardware)– GPIB Standard IEEE 488.1 and IEEE 488.2– USB 2.0 or lower (with the USBTMC-USB488 protocol)– LAN/Ethernet: 10BASE-T/100BASE-TX/1000BASE-T networks– RS-232– VXI-11 Protocol– VISA 2.2 and Keysight SICL– 12 VDC, 2 A– Isolated ELV supply sourceStandard 24-pin IEEE-488 (GPIB), USB 2.0, RS-232 (9-pin), LAN RJ-45– 1.2 MB/s for GPIB– 115 Kb/s for RS-232– 480 Mb/s for USB– 14 GPIB instruments– 1 USB connection (supports up to 4 USB instruments via self-powered hub)– 1 RS-232 instrument– Up to 16 simultaneous connectivity connectionsPower, LAN, GPIB, USB, RS-232, FAULT– IEC61326-1:2005 / EN61326-1:2006– Canada: ICES/NMB-001: Issue 4, June 2006– Australia / New Zealand: AS/NZS CISPR11:2004– IEC 61010-1:2010 / EN 61010-1:2010 (3rd Edition)3 yearsSee the E5810B User’s Manual for supported network protocols and functions226.5 mm (8.92 in) 238 mm (9.37 in) 61mm (2.36 in)1.3 kg–––––––Operating temperature from 0 C to 55 CRelative humidity up to 95% RH at 40 CAltitude up to 2000 mPollution Degree 2Installation Category II (through an AC/DC adapter)Storage temperature from –40 C to 70 CRelative humidity up to 90% RH at 65 C– Power cord and adapterPrinted Quick Start Guide– Keysight Automation-Ready CD with Keysight IO Libraries Suite– Option 100 – Rack Mount Kit– GPIB cables/adapter (see page 12)

12 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetKeysight GPIB, USB and Instrument Control Products SummaryCablesKeysight also offers a variety ofcables that provide easy and reliableconnections. Keysight cables areengineered for exceptional reliabilityand durability, even under the verterProduct82350B PCI-GPIBcard82351A PCIe-GPIBcard82350C PCI-GPIBcard82351B PCIe-GPIBcard82357B USB/GPIBcardE5810A LAN/GPIBgatewayE5810B LAN/GPIB/USB gatewayCable10833D GPIB cable10833A GPIB cable10833B GPIB cable10833C GPIB cable10833F GPIB cable10833G GPIB cableLength0.5 meter1 meter2m4m6m8mCable10833x GPIB cablesAdapter10834A GPIB-toGPIB adapterBest for– GPIB connection for PCI-based PCs or workstations– Maximum throughput for all conigurations up to 900 KB/s– GPIB connection for PCIe-based PCs or workstations– High throughput applications up to 1.4 MB/s– Maximum GPIB throughput for all conigurations– Standard and low-proile brackets allow lexible connection– Bandwidth-intensive test applications– Standard and low-proile brackets allow lexible connection– GPIB connectivity, even for notebook computers– Easiest GPIB instrument set-up to PC– Connection to remote GPIB and RS-232 instruments– Test-system sharing and collaboration among multipleusers– One-box connectivity - remote GPIB, RS-232 and USBconnections– Test-system sharing and collaboration among multipleusers– Connection between GPIB instruments (daisy-chain)– Connection from GPIB instrument to the PCI/GPIB or PCIe/GPIB card– Connection from GPIB instrument to the LAN/GPIB/USBgateway– 2.3-cm clearance at GPIB instrument’s rear panelTypical conigurations of PC-to-instrument connection82350B PCI-GPIB82351A PCIe-GPIBAdaptersThe 10834A GPIB-to-GPIB adapter canhelp when limited rear-panel space andother design considerations make cablingdificult. The 10834A adapter extendsthe irst cable by 2.3 cm away from therear panel to provide clearance for otherconnectors, switches, and cables.Instrument82357BUSB/GPIBInstrumentDirect or via networkLAN/GPIB,LAN/USB orLAN/RS-232Instrument

13 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetRelated Keysight LiteraturePublication titleSimpliied PC Connections for GPIB Instruments, Application note 1409-1This article covers the common PC-to-GPIB instrument conigurations. It explains the I/O hardware and software considerationsfor easy GPIB instrument hook-up and automation.Where to download: www.keysight.comModern Connectivity–Using USB and LAN Connectivity Converters, Application note 1475-1As more and more instruments are equipped with PC-standard interfaces such as USB and LAN, various instrument controlconverters are available in the market today, besides the traditional PCI/GPIB cards. What are the advantages of one over theother? What are the key factors that you need to consider before you decide on buying the instrument control product that’s mostsuitable for your application? This article explains all of the above, with a detailed comparison of data rates over various interfaces.Where to download: www.keysight.comComputer Connectivity Considerations, Application note 1465-2This article complements the above (5989-0123EN) with additional focus on instrument-to-PC coniguration, and costcomparison.Where to download: www.keysight.comTips and Tricks for Using USB, LAN and GPIBThis article provides a variety of tips and tricks that will help you create lexible test systems that can easily incorporate USB, LAN,GPIB and RS-232C.Where to download: www.keysight.comTips on using Keysight GPIB Solutions in National Instrument’s LabVIEW EnvironmentThis article provides answers to frequently asked questions about incorporating Keysight GPIB instrument control hardware into aNational Instrument’s LabVIEW system. Easy-to-follow steps are also documented in a video.Where to download: www.keysight.com/ind/gpibtipsSystem Developer Guide: Using LAN in Test Systems: The Basics, Application note 1465-9This article is the irst of a series of four application notes with System Developers in mind. It explains with great depth how youcan simplify test integration by taking advantage of open connectivity standards. Meet your throughput requirements yet staywithin budget.Where to download: www.keysight.comSystem Developer Guide: Using LAN in Test Systems: Network Coniguration, Application note 1465-10This article is the second of a series of four application notes with System Developers in mind. It explains with great depth howyou can simplify test integration by taking advantage of open connectivity standards. Meet your throughput requirements yet staywithin budget.Where to download: www.keysight.comSystem Developer Guide: Using LAN in Test Systems: PC Coniguration, Application note 1465-11This article is the third of a series of four application notes with System Developers in mind. It explains with great depth how youcan simplify test integration by taking advantage of open connectivity standards. Meet your throughput requirements yet staywithin budget.Where to download: www.keysight.comSystem Developer Guide: Using USB in the Test and Measurement Environment, Application note 1465-12This article is the fourth of a series of four application notes with System Developers in mind. It explains with great depth how youcan simplify test integration by taking advantage of open connectivity standards. Meet your throughput requirements yet staywithin budget.Where to download: www.keysight.comPub 417EN

14 Keysight GPIB, USB and Instrument Control for easy PC-to-Instrument Connections - Data SheetmyKeysightwww.keysight.com/find/mykeysightA personalized view into the information most relevant to you.www.axiestandard.orgAdvancedTCA Extensions for Instrumentation and Test (AXIe) is anopen standard that extends the AdvancedTCA for general purpose andsemiconductor test. Keysight is a founding member of the AXIe consortium.ATCA , AdvancedTCA , and the ATCA logo are registered US trademarks ofthe PCI Industrial Computer Manufacturers Group.www.lxistandard.orgLAN eXtensions for Instruments puts the power of Ethernet and theWeb inside your test systems. Keysight is a founding member of the LXIconsortium.www.pxisa.org

The 82357B USB/GPIB interface implements USB 1.1 (12 Mbits/s) and is compatible with USB 2.0. The 82357B USB/GPIB interface uses a thin, lexible, high-quality USB cable that is USB 2.0-compliant. The USB cable is shielded, and the connector is speciied to 1,500 insertions,