Transcription

Product Data SheetRXPS-002273, Rev CMarch 2021Roxar Mechanical Access Fitting SystemEmerson offers a complete range of access fitting assemblies for installation of corrosion probes and weightloss coupons. The product range comprises of both the traditional 2-inch Roxar Mechanical Access FittingSystem, and the 2-inch Roxar Hydraulic Access Fitting System.The Roxar Mechanical Access and Retrieval System is a complete system for installing and retrieving probesand coupon holders from high pressure pipelines and vessels under full operational pressure. The maximumoperating temperature is 400 F (204 C). The Roxar Mechanical Access products are compatible, andinterchangeable with industry standard products supplied by other vendors.

Roxar Mechanical Access Fitting SystemMarch 2021Roxar Mechanical Access Fitting System componentsThe Roxar Mechanical Access and Retrieval System has the following components: High-pressure mechanical access fitting Mechanical hollow, solid, or reinforced plug Heavy duty protective cover or pressure-proof cover for the mechanical system Mechanical retrieval toolFigure 1: Flareweld Mechanical Access Fitting SystemNoteAn existing 2-inch mechanical system can be retrofitted, even during operation, to the safer and more reliable hydraulic retrievalsystem by using a hydraulic adapter.2www.Emerson.com/Roxar

March 2021Roxar Mechanical Access Fitting SystemRoxar Mechanical Access FittingsThe Roxar Mechanical Access Fittings are available in flareweld and flanged versions as standard. However, other versions (forexample, HUB fittings) are available upon request.Figure 2: Roxar Mechanical Flareweld Access FittingFigure 3: Roxar Mechanical Flanged Access FittingThe mechanical access fitting has an ACME threaded outlet to mate with the service valve of the Roxar Mechanical Retrieval Toolsystem. The mechanical access fitting has a threaded connection with the hollow or solid plug. The mechanical access fittings areavailable in a wide variety of materials from different types of carbon steel up to noble materials, such as nickel alloys.The mechanical access fittings meet NACE MR0175 requirements. The NORSOK specification is available upon request.For more information, see Roxar High Pressure Access Fittings - Product Data Sheet.www.Emerson.com/Roxar3

Roxar Mechanical Access Fitting SystemMarch 2021Roxar Mechanical PlugsThe Roxar Mechanical Hollow Plug is used for electrical probes like the Electrical Resistance (ER), Linear Polarization Resistance(LPR) probes, and Sand Erosion probes. The Roxar Mechanical Solid Plug is used for passively monitoring devices like sacrificialprobes, weight loss coupons, bio coupons, and injection / sampling equipment.Figure 4: Mechanical Solid plug (left) and Hollow plug (right)The primary packing is made from PTFE (25% glass filled).The Roxar Hollow and Solid Plugs are available in 316 stainless steel (ss), duplex, super duplex, as well as nickel alloys UNS N06625and N08825 as standard options. For those applications where galling is a concern, a PTFE coating of the threaded section of theplug can be provided. Alternatively, plugs in different materials can be supplied, to mismatch the fitting material in order tominimize the risk of galling.A common challenge for high velocity applications is the strength of the device (coupon or probe) with respect to static anddynamic stress in relation to operating conditions (flow velocity, density and viscosity). Emerson offers a unique reinforced plugdesign with increased performance for high velocity applications.For more information, see Roxar High Pressure Plugs - Product Data Sheet.Roxar Mechanical Access Fitting CoversThe Roxar Mechanical Access Fitting Covers protect the external ACME threads on the access fitting.For weight loss coupons and corrosion probes, the mechanical access fitting covers are available also as pressure retaining covers,with pressure rating up to 6,000 psi (420 bar).For coupons, the pressure retaining cover contains a pressure gauge and bleed valve. For corrosion probes, the pressure retainingcover also contains a pressure retaining probe connector.Figure 5: Examples of Mechanical Access Fitting Covers4www.Emerson.com/Roxar

March 2021Roxar Mechanical Access Fitting SystemFor more information, see Roxar Mechanical Access Fitting Covers - Product Data Sheet.Roxar Probes and Coupon HoldersThe Roxar Retractable Electrical Resistance (ER) Probe determines the corrosion rates by measuring the electrical resistance fromtime to time. The increase in electrical resistance is proportional to the accumulated corrosion of the probe element during theexposure period.The Roxar Retractable Linear Polarization Resistance ( LPR) probe is designed to be used in water systems. The internal corrosionmonitoring is based on measuring the current response to a small polarization (10 - 20 mV) to a steel electrode’s corrosionpotential. Electrochemical theory (Stern-Geary’s equations) shows that corrosion rates can be calculated directly from the currentresponse to such small, known polarization, and thus, LPR measurements give an immediate corrosion rate value.Figure 6: Roxar ER and LPR ProbesThe Roxar Sand Probe calculates sand erosion rates by exposing the probe elements to sand particles in the flow. The probe's metalloss is calculated based on the resistance in the measurement element due to sand erosion.Figure 7: Roxar Sand Erosion ProbeThe Roxar Retrievable Weight Loss Coupons and Holders are used to correlate the corrosion rates on pipe walls by measuring theweight of elements exposed to corrosion over a given period. The effects of pitting, scaling, deposits or bacteria can also beanalyzed, if required.www.Emerson.com/Roxar5

Roxar Mechanical Access Fitting SystemMarch 2021The Roxar Retrievable Weight Loss Coupons and Holders are used to correlate the corrosion rates on pipe walls by measuring theweight of elements exposed to corrosion over a given period. Therefore, coupon results are linked to the corrosiveness of thesystem, and not to absolute metal loss on the pipe itself. If required, the effects of pitting, scaling, deposits or bacteria can also beanalyzed.Figure 8: Various coupons and holdersFor more information, see Roxar Retrievable ER Probes - Product Data Sheet, Roxar Retrievable LPR Probes - Product Data Sheet,Roxar Retrievable Sand Erosion Probes – Product Data Sheet, and Roxar Retrievable Weight Loss Coupons And Holders – Product DataSheet.Roxar Mechanical Retrieval Tool and Service ValveThe Roxar Mechanical Retrieval Tool and Service Valve is a high-quality tool for installing and retrieving probes and coupons underfull operational pressure. The Roxar Mechanical Retrieval Tool and Service Valves are compatible with most 2” access systemsprovided by common corrosion monitoring vendors on the market.Figure 9: Mechanical Retrieval Tool and Service ValveFor more information, see Roxar Mechanical Retrieval Tool and Service Valve - Product Data Sheet.6www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021Model code numbering systemHigh pressure access fittingsHigh pressure access fitting product descriptionCodeProduct descriptionTAFHigh pressure access fittingDesign type for high pressure access fittingsCodeDesign type for high pressure access fittingsMMechanicalPressure rating options for high pressure access fittingsCodePressure rating options for high pressure access fittings1Max 6,000 psi (420 bar) design pressure; Limited by the process connection rating2 (1)(2)Max 10,000 psi (690 bar) design pressure(1)(2)Not available with material options 316B, 316F.Only available with special process connection. Contact Emerson for more information.Process connections for high pressure access fittingsCodeProcess connections for high pressure access fittings002 in Flareweld for 2 in pipe; ASME B31.3202 in Flanged 150 lbs raised face; ASME B16.5212 in Flanged 300 lbs raised face; ASME B16.5222 in Flanged 400 lbs / 600 lbs raised face; ASME B16.5232 in Flanged 900 lbs / 1500 lbs raised face; ASME B16.5242 in Flanged 2500 lbs raised face; ASME B16.5302 in Flanged 150 lbs ring type joint; ASME B16.5312 in Flanged 300 lbs ring type joint; ASME B16.5322 in Flanged 400 lbs / 600 lbs ring type joint; ASME B16.5332 in Flanged 900 lbs / 1500 lbs ring type joint; ASME B16.5342 in Flanged 2500 lbs ring type joint; ASME B16.5www.Emerson.com/Roxar7

Roxar Mechanical Access Fitting SystemMarch 2021Material for high pressure access fittingsCodeMaterial for high pressure access fittings105B (1)(2)Carbon steel ASTM A105, bar; NACE MR0175350B(1)(2)Carbon steel ASTM A350 Gr. LF2 Cl. 1, bar; NACE MR0175605B(1)(2)Carbon steel ASTM A694 F60/ F65, bar; NACE MR0175316B(1)(2)Stainless steel ASTM A479 UNS S31603 (316L), bar; NACE MR0175318B(1)(2)Duplex ASTM A479 UNS S31803, bar; NACE MR0175760B(1)(2)Super duplex ASTM A479 UNS S32760, bar; NACE MR0175625B(1)(2)Nickel alloy ASTM B446 UNS N06625, bar; NACE MR0175825B(1)(2)Nickel alloy ASTM B425 UNS N08825, bar; NACE MR0175105F(2)(3)Carbon steel ASTM A105, forging; NACE MR0175350F(2)(3)Carbon steel ASTM A350 Gr. LF2 Cl. 1, forging; NACE MR0175605F(2)(3)Carbon steel ASTM A694 F60/ F65, forging; NACE MR0175316F(2)(3)Stainless steel ASTM A182 UNS S31603 (316L), forging; NACE MR0175318F(2)(3)Duplex ASTM A182 F51 (UNS S31803), forging; NACE MR0175760F(2)(3)Super duplex ASTM A182 F55 (UNS S32760), forging; NACE MR0175625F(2)(3)Nickel alloy ASTM B564 UNS N06625, forging; NACE MR0175825F(2)(3)Nickel alloy ASTM B564 UNS N08825, forging; NACE MR0175(1)(2)(3)Available only with process connections option 00, Flareweld.Requires special tests and certificates options MC or MT.Not available with process connections option 00, Flareweld.Operating mode and conditionsCodeOperating mode and conditionsPressure Rating Code 1 (Max 6,000 psi design pressure)00Not applicableCoating options for high pressure access fittingsCodeCoating options for high pressure access fittingsC0No coatingC1(1)(2)Roxar standard coating for CS with operating temperature below 248 F (120.0 C), RAL 7035C2 (1)(2)Roxar standard coating for CS with operating temperature above 248 F (120.0 C), RAL 9006C6 (1)(3)Roxar standard coating for stainless steel, RAL 7035C7 (1)(4)Roxar standard coating for nickel alloys, RAL 7035(1)(2)(3)(4)8Not available with Process Connections option 00, Flareweld.Not available with material options 105B, 350B, 605B, 316B, 318B, 760B, 625B, 825B, 316F, 318F, 760F, 625F, 825F.Not available with material options 105B, 350B, 605B, 316B, 318B, 760B, 625B, 825B, 105F, 350F, 605F, 625F, 825F.Not available with material options 105B, 350B, 605B, 316B, 318B, 760B, 625B, 825B, 105F, 350F, 605F, 316F, 318F, 760F.www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021Tag Plates for high pressure access fittingsCodeTag Plates for high pressure access fittingsZZNo tag platesTGStandard Tag plates for fittings, SS316 with ss bands, Dim 89 x 19mmFactory options for high pressure access fittingsCodeFactory Options for high pressure access fittingsZStandard productCertificate, tests, calibrations and services for high pressure access fittingsCodeCertificate, tests, calibrations and services (optional) for high pressure access fittingsD1(1)Dye penetrant test for access fitting bodyPM(1)Positive material identification for access fitting body (without C content)PC(1)(2)Positive material identification for acces fitting body (with C content)HTRoxar standard pressure testPD(3)PED statement of conformityMG(4)Magnetic particle inspection for access fitting bodyMCMaterial Inspection Certificate 3.1 (supplier lot traceability per EN 10204)MTMaterial Inspection Certificate 3.2 (supplier lot traceability per EN 10204)MN(5)Material requirements according to NORSOK M-630MN2(6)(7)Material specification type 2(1)(2)(3)(4)(5)(6)(7)Not available with material options 105B, 350B, 605B, 105F, 350F, 605F.Not available with material options 625B, 825B, 625F, 825F.Requires special tests and certificates option HT.Available only with material options 105B, 350B, 605B, 105F, 350F, 605F.Not available with material options 605B, 605F, 825B, 825F.Not available with special tests and certificates options MT, MN.Not available with material options 605B, 605F.www.Emerson.com/Roxar9

Roxar Mechanical Access Fitting SystemMarch 2021PlugsProduct description for plugsCodeProduct description optionTPLUGPlugDesign typeCodeDesign typeMMechanicalPlug typeCodePlug type10Solid plug (suitable for hydrotest); Nut in plastic11Solid plug (suitable for hydrotest); Metallic nut – same material as plug body20Hollow plug (not suitable for hydrotest); Sealing plug in plastic21Hollow plug (suitable for hydrotest); Metallic sealing plug – same material as plug body30Reinforced plug (not suitable for hydrotest); Sealing plug in plastic31Reinforced plug (suitable for hydrotest); Metallic sealing plug – same material as the plug bodyMaterial plug bodyCodeMaterial plug body316B(1)Stainless steel ASTM A479 UNS S31603 (316L), bar, NACE MR0175318B(1)Duplex ASTM A479 UNS S31803, bar, NACE MR0175625B(1)Inconel ASTM B446 UNS N06625, bar, NACE MR0175760B(1)Super duplex ASTM A479 UNS S32760, bar, NACE MR0175825B(1)Incoloy ASTM B425 UNS N08825, bar, NACE MR0175(1)Requires special tests and certificates options MC or MT.Operating mode and conditions for plugsCodeOperating mode and conditions00O-ring not applicable; PTFE primary packing01 (1)Standard Viton o-ring (-4 F (-20 C) to 392 F (200 C)) PTFE primary packing02(1)Rapid gas decompression FR 25/90 o-ring (42 F (-40 C) to 392 F (200 C)) PTFE primary packing03(1)Rapid gas decompression and/or 100% Methanol Elast-O-Lion 101 o-ring (-20 F (-29 C) to 320 F (160 C))PTFE primary packing(1)10Not available with plug type options 10, 20, 21, 30, 31.www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021Product-specific optionsCodeProduct specific optionsC0No coatingC4PTFE coating on mechanical plug threadsFactory option for plugsCodeFactory optionsZStandard productCertificates, tests, calibrations, and services for plugsCodeCertificates, tests, calibrations and services (optional)D1Dye penetrant test for plug bodyPMPositive material identification for plug body (without C content)PC(1)Positive material identification for plug body (with C content)PD(2)PED statement of conformityMCMaterial inspection certificate 3.1 (supplier lot traceability per EN 10204)MTMaterial inspection certificate 3.2 (supplier lot traceability per EN 10204)MN(3)Material requirements according to NORSOK M-630MR(4)Material specification type 2(1)(2)(3)(4)Not available with Material Plug Body options 625B, 825B.Not available with design type option M and Plug type option 11, and operating mode and conditions option 00.Not available with material plug body option 825B.Not available with special tests and certificate options MT, MN.CoversProduct descriptionModelProduct descriptionTCOVCoverDesign typeCodeDesign typeMMechanicalwww.Emerson.com/Roxar11

Roxar Mechanical Access Fitting SystemMarch 2021Pressure ratingCodePressure rating1Maximum 6,000 psi (420 bar) design pressure2(1)(2)Maximum 10,000 psi (690 bar) design pressure(1)(2)Available with design type M with specific connection option. For more information, consult Emerson.Not available with material option 316B.Cover designCodeCover designPressure rating Code 1 (Maximum 6,000 psi design pressure)00Heavy duty without hole01Heavy duty with hole02Pressure proof for solid plug03Pressure proof for hollow plugPressure rating Code 2 (Maximum 10,000 psi design pressure)00Heavy duty without hole01Heavy duty with hole02Pressure proof for solid plug03Pressure proof for hollow plugMaterialCodeMaterial105B(1)Carbon steel ASTM A105, bar, NACE MR0175316B(1)Stainless steel ASTM A479 UNS S31603 (316L) bar, NACE MR0175318B(1)Duplex ASTM A479 UNS S31803, bar NACE MR0175350B(1)Carbon steel ASTM A350 Gr. LF2 Cl. 1, bar, NACE MR0175605B(1)Carbon steel ASTM A694 F60/ F65, bar, NACE MR0175625B(1)Inconel ASTM B446 UNS N06625, bar, NACE MR0175760B(1)Super duplex ASTM A479 UNS S32760, bar, NACE MR0175825B(1)Incoloy ASTM B425 UNS N08825, bar, NACE MR0175(1)12Requires special tests and certificates option MC or MT.www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021Operating mode and conditionsCodeOperating mode and conditionsPressure Rating Code 1 (Maximum 6,000 psi design pressure)00(1)Not applicable01(2)Standard; Viton o-ring(-4 F (-20 C) to 392 F (200 C))02(2)Rapid gas decompression; FR 25/90 o-ring(-42 F (-41 C) to 392 F (200 C))03(2)Rapid gas decompression and/or 100% methanol Elast-O-Lion 101 o-ring(-21 F (-29 C) to 320 F (160 C))04(2)Standard; generic FKM 75 o-ring(-4 F (-20 C) to 392 F (200 C))05(2)Rapid gas decompressionGeneric FKM 90 o-ring(5 F (-15 C) to 392 F (200 C))06(2)Rapid gas decompression or 100% methanol; generic HNBR 90 o-ring(-13 F (-25 C) to 284 F (140 C))Pressure Rating Code 2 (Maximum 10,000 psi design pressure)00(1)Not applicable01(2)Standard Viton o-rings(-4 F (-20 C) to 392 F (200 C))02(2)Rapid gas decompression FR 25/90 o-rings(-42 F (-41 C) to 392 F (200 C))03(2)Rapid gas decompression and/or 100% methanol Elast-O-Lion 101 o-rings(-21 F (-29 C) to 320 F (160 C))04(2)Standard; generic FKM 75 o-rings(-4 F (-20 C) to 392 F (200 C))05(2)Rapid gas decompression; generic FKM 90 o-rings,(5 F (-15 C) to 392 F (200 C))06(2)Rapid gas decompression or 100% methanol; generic HNBR 90 o-rings(-13 F (-25 C) to 284 F (140 C))(1)(2)Not available with cover design options 02, 03.Not available with cover design options 00, 01.www.Emerson.com/Roxar13

Roxar Mechanical Access Fitting SystemMarch 2021Product specific optionsCodeProduct specific optionsC0No coatingC1(1)Roxar standard coating for carbon steel with operating temperature below 248 F (120 C), RAL 7035C2(1)Roxar standard coating for carbon steel with operating temperature above 248 F (120 C), RAL 9006C6(2)Roxar standard coating for stainless steel, RAL 7035C7(3)Roxar standard painting for nickel alloys, RAL 7035(1)(2)(3)Not available with material options 316B, 318B, 760B, 625B, 825B.Not available with material options 105B, 350B, 605B.Available only with material options 625B, 825B.Probe adapterCodeProbe adapterZNo probe adapterA(1)Standard probe adapter for pressure-proof cover(1)Not available with cover design options 00, 01, 02.Factory optionsCodeFactory optionsZStandard productCertificates, tests, calibrations, and services (optional)CodeCertificates, tests, calibrations and services (optional)D1(1)Dye penetrant test for cover bodyPM(1)(2)Positive material identification for cover body (without C content)PC(1)(3)Positive material identification for cover body (with C content)PD(4)PED statement of conformityMG(5)Magnetic particle inspection for cover bodyMCMaterial inspection certificate 3.1 (supplier lot traceability per EN 10204)MTMaterial inspection certificate 3.2 (supplier lot traceability per EN 10204)MN(6)Material requirements according to NORSOK M-630MR(7)(8)Material specification type 2(1)(2)(3)(4)(5)(6)(7)(8)14Not available with material options 105B, 350B, 605B.Not available with Special Tests and Certificates optom PC.Not available with material options 625B, 825B.Not available with cover design options 00,01.Not available with material options 316B, 318B, 760B, 625B, 825B.Not available with material options 605B, 825B.Not available with special tests and certificates options MT, MN.Not available with material option 605B.www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021ProbesProduct descriptionCodeProduct descriptionTHCMPRCorrosion monitoring probeMeasuring methods for probesCodeMeasuring methods for probes1Electrical resistance2Linear polarization resistance3Galvanic monitoringProbe body typeCodeProbe body type01Standard design fixed length05Reinforced design, fixed length (no support ring)Probe body materialCodeProbe body material316B(1)Stainless steel ASTM A479 UNS S31603 (316L), bar; NACE MR0175318B(1)Duplex ASTM A479 UNS S31803, bar; NACE MR0175760B(1)Super duplex ASTM A479 UNS S32760, bar; NACE MR0175625B(1)Inconel ASTM B446 UNS N06625, bar; NACE MR0175825B(1)Incoloy ASTM B425 UNS N08825, bar; NACE MR0175(1)Requires Special Tests and Certificates options MC or MT.www.Emerson.com/Roxar15

Roxar Mechanical Access Fitting SystemMarch 2021Element typeCodeElement type00(1)Flush, Repro D 1.0 mm01(1)Flush, Repro D 2.0 mm02(1)Flush, Repro D 4.0 mm03(1)Flush, Repro E 0.25 mm04(1)Flush, Repro E 0.50 mm05(1)Flush, Repro F (HS) 0.10 mm10(1)Tubular, T10, (0.25 mm)11(1)Tubular, T20, (0.50 mm)20(2)Flush, double B30(2)Projected, double C21(2)Flush, triple B31(2)Projected, triple C40(3)Flush, Galvopro B50(3)Projected, Galvopro C(1)(2)(3)Available only with Measuring Method option 1, Electrical Resistance.Available only with Measuring Method option 2, Linear Polarization Resistance.Available only with Measuring Method option 3, Galvanic Monitoring.Element materialCodeElement materialAny element typeSStandard carbon steel S355J2 (EN10025), for general applicationElement type 04AFor carbon steel pipes of A106 Gr. B, A333 Gr. 6, API 5L Gr. B, API 5L Gr. X42BFor carbon steel pipes of API 5L Gr. X52, API 5L Gr. X60, API 5L Gr. X65CFor stainless steel pipes 316L (UNS S31603)DFor duplex stainless steel pipes 22Cr (UNS S31803)Element types 30, and 31AFor carbon steel pipes of A106 Gr. B, A333 Gr. 6, API 5L Gr. B, API 5L Gr. X42BFor carbon steel pipes of API 5L Gr. X52, API 5L Gr. X60, API 5L Gr. X65CFor stainless steel pipes 316L (UNS S31603)DFor duplex stainless steel pipes 22Cr (UNS S31803)16www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021Probe lengthCodeProbe length000Length must be defined before an order can be acceptedFor flush design measurements, the minimum length is 055 mm and the maximum length is 534 mm.For projected design measurements, the minimum length is 78 mm and the maximum length is 643 mm.Factory optionsCodeFactory optionsZStandard productCertificates, tests, calibrations, and services (optional)CodeCertificates, tests, calibrations, and services (optional)Dye penetrant examination (select any from this group)D1Dye penetrant test for probe housingPositive material testing (select only one from this group)PM(1)Positive material identification for probe housing (without C content)PC(2)Positive material identification for probe housing (with C content)Pressure testing (select any from this group)PT10000 psi (690 bar) test certificateAdditional raw material testingMCMaterial inspection certificate 3.1 (supplier lot traceability per EN 10204)MTMaterial inspection certificate 3.2 (supplier lot traceability per EN 10204)MN(3)Material requirements according to NORSOK M-630MR(4)Material specification type 2(1)(2)(3)(4)Not available with Special Tests and Certificates option PC.Not available with Probe Body Material options 625B, 825B.Not available with Probe Body Material option 825B.Not available with Special Tests and Certificates options MT, MN.Sand probeProduct descriptionModelProduct descriptionTHSMPRSand/Erosion Monitoring Probewww.Emerson.com/Roxar17

Roxar Mechanical Access Fitting SystemMarch 2021Pipe sizeCodePipe Size13 in pipe, 2 elements24 in pipe, 2 elements35-6 in pipe, 3 elements46 in pipe, 4 elements58-10 in pipe, 4 elements612 in pipe, 4 elementsProbe body typeCodeProbe body type01Standard design02Reinforced design, fixed length for access fitting Flareweld03Reinforced design, fixed length for access fitting flanged MECH 300#, HYD 1500#04Reinforced design, fixed length for access fitting flanged MECH 4/600#, HYD 2500#Probe body materialCodeProbe body material2C6AStainless steel A 479 Gr. 316L, bar EN 10204 3.1 NACE MR01752D6ADuplex A 276 / A 479 UNS S31803, bar EN 10204 3.1 NACE MR01752C6CStainless steel A 479 Gr. 316L, bar EN 10204 3.1 NACE MR0175 NORSOK M630 MDS S012D6CDuplex A 276 / A 479 UNS S31803, bar EN 10204 3.1 NACE MR0175 NORSOK M630 MDS D47Element thickness and materialCodeElement thickness and material3M300 micron, Monel 4005M500 micron, Monel 4002D300 micron, duplex3D500 micron, duplex18www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021Probe lengthCodeProbe lengthL124(1)(2)Standard length for Flareweld fittings, standard designL146(2)(3)Standard length for Flareweld fittings, standard designL173(2)(4)Standard length for Flareweld fittings, standard designL193(2)(5)Standard length for Flareweld fittings, standard designL244(2)(6)Standard length for Flareweld fittings, standard designL336(2)(7)Standard length for Flareweld fittings, standard designL138(1)(8)Standard length for Flareweld fittings, reinforced designL160(3)(8)Standard length for Flareweld fittings, reinforced designL187(4)(8)Standard length for Flareweld fittings, reinforced designL207(5)(8)Standard length for Flareweld fittings, reinforced designL258(6)(8)Standard length for Flareweld fittings, reinforced designL350(7)(8)Standard length for Flareweld fittings, reinforced design(1)(2)(3)(4)(5)(6)(7)(8)Available only with pipe size option 1, 3 in pipe, 2 elements.Available only with probe body type options 01, standard design.Available only with pipe size option 2, 4 in pipe, 2 elements.Available only with pipe size option 3, 5 - 6 in pipe, 3 elements.Available only with pipe size option 4, 6 in pipe, 4 elements.Available only with pipe size option 5, 8 - 10 in pipe, 4 elements.Available only with pipe size option 6, 12 in pipe, 4 elements.Available only with probe body type option 02, reinforced design, fixed length for access fitting Flareweld.Factory optionCodeFactory optionsZStandard productCertificate, tests, calibrations and services (optional)CodeCertificates, tests, calibrations, and services (optional)D1Dye penetrant testPMPositive material identificationPT10000 psi (690 bar) test certificateCorrosion couponsProduct descriptionCodeProduct descriptionTHCOUPHigh pressure corrosion coupon assemblywww.Emerson.com/Roxar19

Roxar Mechanical Access Fitting SystemMarch 2021Coupon typeCodeCoupon type0Strip1Scale2Disc3BioCoupon materialCodeCoupon materialN0Not applicable; coupon and insulation not includedC1Carbon steel S355J2 (EN10025); Insulation includedC2(1)Carbon steel AISI 1018; Insulation includedC3(1)Carbon steel ASTM A106 Gr, B; Insulation includedC4(1)Carbon steel ASTM A333 Gr, B; Insulation includedC5(1)Carbon steel API 5L Gr, B; Insulation includedC6(1)Carbon steel API 5L Gr, X52; Insulation includedC7(1)Carbon steel API 5L Gr, X60; Insulation includedC8(1)Carbon steel API 5L Gr, X65; Insulation includedS1Stainless steel 316L UNS S31603; Insulation includedS2Duplex stainless steel UNS S31803; Insulation included(1)Not available with Coupon Type option 3.Coupon holder designCodeCoupon holder design01Standard design, fixed length05Reinforced design, fixed length (no support ring)20www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021Coupon holder materialCodeCoupon holder material316B(1)Stainless steel ASTM A479 UNS S31603 (316L), bar NACE MR0175318B(1)Duplex ASTM A479 UNS S31803, bar NACE MR0175760B(1)Super duplex ASTM A479 UNS S32760, bar; NACE MR0175625B(1)Inconel ASTM B446 UNS N06625, bar; NACE MR0175825B(1)Incoloy ASTM B425 UNS N08825, bar; NACE MR0175(1)Requires Special Tests and Certificates options MC or MT.Coupon holder lengthCodeCoupon holder length000Length has to be defined before order can be accepted060-149(1)Coupon holder length, mm150-700Coupon holder length, mm(1)Not available with Coupon Holder Design, option 05.Pipe insertion lengthCodePipe insertion lengthNNNNot applicableCoupon holder optionCodeCoupon holder optionsZStandardFactory optionsCodeFactory optionsZStandard productwww.Emerson.com/Roxar21

Roxar Mechanical Access Fitting SystemMarch 2021Certificates, tests, calibrations, and services (optional)CodeCertificates, tests, calibrations, and services (optional)Dye penetrant examination (select any from this group)D1Dye penetrant test for coupon holderPositive material testing (select only one from this group)PM(1)Positive material identification for coupon holder (without C content)PC(2)Positive material identification for coupon holder (with C content)Additional raw material testingMCMaterial inspection certificate 3.1 (supplier lot traceability per EN 10204)MTMaterial inspection certificate 3.2 (supplier lot traceability per EN 10204)MN(3)Material requirements according to NORSOK M-630MR(4)Material specification type 2(1)(2)(3)(4)Not available with Special Tests and Certificates option PC.Not available with Coupon Holder Material options 625B, 825B.Not available with Coupon Holder Material option 825B.Not available with Special Tests and Certificates options MT, MN.Roxar Mechanical Retrieval ToolProduct descriptionModelProduct descriptionMRTMechanical retrieval toolPressure ratingCodePressure rating1Maximum 6,000 psi design pressureTool lengthCodeTool lengthL01Maximum device length: 150 mmL02Maximum device length: 240 mmL03Maximum device length: 350 mmL04Maximum device length: 425 mmL05Maximum device length: 640 mmL06Maximum device length: 920 mmL07Maximum device length: 1170 mm22www.Emerson.com/Roxar

Roxar Mechanical Access Fitting SystemMarch 2021Tool material (Main components)CodeTool material (Main components)2G6AAlloy 17-4PH (UNS S17400) cylinder, ASTM A182 F22 hammer nut EN10204 3.1 NACE MR0175Operating mode and conditionsCodeOperating mode and conditions01Standard Viton o-rings02Rapid gas decompression FR25/90 o-rings03Rapid gas decompression and/or 100% Methanol Elast-O-Lion 101 o-ringsApprovalsCodeApprovalsMRoxar standard (no third party approval)N(1)PED compliant tool(1)Only available with Tool Material (Main Components), option 2G6A.Tag platesCodeTag platesZZNo tag platesTGStandard tag platesFactory optionsCodeFactory optionsZStandard pr

and coupon holders from high pressure pipelines and vessels under full operational pressure. The maximum . A common challenge for high velocity applications is the strength of the device (coupon or probe) with respect to static and . The Roxar Mechanical Retrieval Tool and Service Valve is a high-qualit