Transcription

CHANGEMACHINESPRODUCT CATALOGHamilton Mfg Corp.1026 Hamilton Dr.Holland, OH 43528Document #6052P: 419.867.4858P: 888.723.4858F: 419.867.4850hamiltonmfg.com1/20

[email protected]

ContentsRear Load Change Machines3600RL . 4DRS . 5RNS . 6ER-60 . 7Bill to Bill . 8Bill to Bill Mini . 9Rear Load Change Machines with Credit CardDRS-CCT . 10RNS-CCT . 11Rear Load Change & Gift Card DispenserCCD . 12Front Load Change Machines1200FL-C & 1200FL-S . 133600FL . 142000V & 2600V . 15E-385 & E-770 . 16VN-1 . 17Data Access Network (D.A.N.) . 18Headers & Bases . 19Accessories & Options Glossary . 19Available for use in the USAAvailable for use in CanadaNote: configuration and available options will differ to USA spec. Pleaseconsult your Hamilton sales representative for further information.Available for use in AustraliaNote: configuration and available options will differ to USA spec. AllAustralian-spec machines include Mars validators and step downtransformers. Please consult your Hamilton sales representative forfurther information.3

3600RLHeavy Duty, Rear-LoadThe 3600RL offers the most versatility of any rear-load changer. It can beconfigured with one, two or three high capacity hoppers, and one or twovalidators. A multi-coin acceptor may be added to fit the needs of your business.When used with the Data Access Network (D.A.N.), you have the ability to remote intothe changer and clear certain error codes, as well as view audits.A Handheld Kit is required for setup.Changes/Pays 1, 5, 10, 20 to coins or tokensFeatures Two Hamilton XE validators (with Tokenote acceptance) 1,000 bill stacker Cabinet: 11 gauge carbon steel Faceplate: 7 gauge stainless steel Heater pad (with XE validator only) Weather shields Two heavy-duty Medeco plug locks Audit Pro 2000 controller Maximum capacity: 1 hopper - 4,800 quarters; 2 hopper - 9,600 quarters;3 hopper - 14,400 quarters Power: 120 VAC 60 Hz Weight: 325 lbs. /147 kg ETL listed14,400 QUARTER CAPACITY2 validators / 3 hoppers1 validator / 3 hoppers9,600 QUARTER CAPACITY2 validators / 2 hoppers1 validator / 2 hoppers4,800 QUARTER CAPACITY1 validator / 1 hopperBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoinco3600RL ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines, required for setup) [part #100-0136]IDX coin acceptor/mechanismCustomized face panelToken face panelToken hopper (must indicate token size when ordering)Locking hopper cover [part #11-0052A]Out of Service relay kit [part #47-0155A]Portable thermal report printer [part #100-0203]D.A.N.-ready controller (not available when two XE validators are being used)The 3600RL is a direct replacement to the discontinued RL-2/RL-3 change machines.43600RL DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:34 7/8” H x 21 1/4” W x 14 3/8” D88.6 cm H x 54 cm W x 36.5 cm DFaceplate:38 3/8” H x 24 3/4” W x 3/16” D97.5 cm H x 63 cm W x 48 cm D

DRSHeavy Duty, Rear-LoadThe DRS is a rear-load changer that has two separate changers in one cabinet.It comes fully-equipped with two identical sets of components. For high volumelocations, the DRS includes two high-capacity bulk load hoppers, which have a 4,800quarter capacity ( 1,200) each. That’s a total of 2,400 in ONE cabinet.When used with the Data Access Network (D.A.N.), you have the ability to remote intothe changer and clear certain error codes, as well as view audits.Changes/Pays 1, 5, 10, 20 to coins or tokensFeatures Two Hamilton XE validators (with Tokenote acceptance) 1,000 bill stacker Cabinet: 11 gauge carbon steel Faceplate: 7 gauge stainless steel Heater pad (with XE validator only) Weather shield Two heavy-duty Medeco plug locks C-2000 controller Maximum capacity: 9,600 Quarters Power: 120 VAC 60 Hz Weight: 230 lbs/99.8 kg ETL listedDRS DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:34-3/4” H x 18-3/16” W x 14-7/16” D88.3 cm H x 46.4 cm W x 36.8 cm DFaceplate:38-5/16” H x 21-5/8” W97.3 cm H x 54.9 cm WBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoincoDRS ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines) [part #100-0136]Customized face panelToken face panelToken hopper (must indicate token size when ordering)Locking hopper cover [part #11-0052A]Out of Service relay kit [part #47-0155A]Audit Pro 2000 controller (Handheld Kit required for programming)Portable thermal report printer (works with Audit Pro 2000 controller only) [part #100-0203]D.A.N.-ready controller5

RNSHeavy Duty, Rear-LoadThe RNS changer features a single bill acceptor with a high capacity coin hopper thatholds up to 4,800 quarters ( 1,200), and a wrap-around style door for added security.When used with the Data Access Network (D.A.N.), you have the ability to remote intothe changer to clear certain error codes, as well as view audits.Changes/Pays 1, 5, 10, 20 to coins or tokensFeatures Hamilton XE validator (with Tokenote acceptance) 1,000 bill stacker Cabinet: 11 gauge carbon steel Faceplate: 7 gauge stainless steel Heater pad (with XE validator only) Weather shield Two heavy-duty Medeco plug locks C-2000 controller Maximum capacity: 4,800 quarters Power: 120 VAC 60Hz Weight: 150 lbs/68 kg ETL listedRNS DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:34-1/2” H x 9” W x 13” D89.6 cm H x 22.9 cm W x 33 cm DFaceplate:38-1/2” H x 12” W97.8 cm H x 30.5 cm WRNS-XTThe RNS-XT has the same features as the standard RNS, but includes an extended faceplate that is 5” widerBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoincoRNS ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines) [part #100-0136]Customized face panelToken face panelToken hopper (must indicate token size when ordering)Locking hopper cover [part #11-0052A]Out of Service relay kit [part #47-0155A]Audit Pro 2000 controller (Handheld Kit required for programming)Portable thermal report printer (works with Audit Pro 2000 controller only) [part #100-0203]D.A.N.-ready controllerThe RNS is a direct replacement to the discontinued CM1 change machine.6

ER-60Heavy Duty, Rear-LoadThe ER-60 is our most economical rear-load changer. It features all of the same highquality components as the RNS, with a maximum hopper capacity of 2,400 quarters( 600).When used with the Data Access Network (D.A.N.), you have the ability to remote intothe changer to clear certain error codes, as well as view audits.Changes/Pays 1, 5, 10, 20 to coins or tokensFeatures Hamilton XE validator (with Tokenote acceptance) 1,000 bill stacker Cabinet: 11 gauge carbon steel Faceplate: 7 gauge stainless steel Heater pad (with XE validator only) Weather shield Two heavy-duty Medeco plug locks C-2000 controller Maximum capacity: 2,400 quarters Power: 120 VAC, 60 Hz Weight: 135 lbs/61 kg ETL listedER-60 DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:20-3/4” H x 15” W x 13” D52.7 cm H x 38.1 cm W x 33 cm DFaceplate:24-3/4” H x 18” W62.9 cm H x 45.7 cm WER-60 XTThe ER-60-XT has the same features as the standard ER-60, but includes an extended faceplate. It is a directreplacement to the discontinued 540XRS change machine.BILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoincoER-60 ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines) [part #100-0136]Customized face panelToken face panelToken hopper (must indicate token size when ordering)Out of Service relay kit [part #47-0155A]Audit Pro 2000 controller (Handheld Kit required for programming)Portable thermal report printer (works with Audit Pro 2000 controller only) [part #100-0203]D.A.N.-ready controller7

BILL TO BILLHeavy Duty Rear-Load ChangerGive customers more bill changing options with the Hamilton Bill to Bill change machine.Break larger bills down to smaller bills, and/or bills to coins.The Bill to Bill dispenser is offered with a dual cassette to give more versatility. Theoptional coin hopper will allow dispensing of either coins or tokens along with bills.Choose from Hamilton’s XE validator, or third-party validators. With the Mars validator,you can accept up to a 100 bill.A Handheld Kit is required for setup.Changes/Pays 1, 5, 10, 20 to bills, coins or tokensFeatures: Hamilton XE validator 1,000 bill stacker Cabinet Heater Cabinet: 11 gauge stainless steel Faceplate: 7 gauge stainless steel Weather shield Two heavy-duty Medeco locks EGL controller (D.A.N. compatible) Maximum capacity: 4,800 quarters Dual bill dispenser Power: 120 VAC 60Hz Weight: 230 lbs/104.3 kgBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMars High Denomination (accepts 1 - 100 bills)CoincoBILL TO BILL ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines, required for setup) [part #100-0136]Customized face panelToken face panelCoin hopper (dispense quarters, dollar, or two dollar coins)Token hopper (must indicate token size when ordering)No hopperLocking hopper cover [part #11-0052A]Out of Service relay kit [part #47-0155A]Spare bill cassettes [part #49-9533]Bill cassette lock [part #63-5061]8BILL TO BILL DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:34 ¾” H x 18 3/16” W x 14 7/16” D88.3 cm H x 46.4 cm W x 36.8 cm DFaceplate:38 5/16” H x 21 5/8” W97.3 cm H x 54.9 cm W

BILL TO BILL MINICompact Bill Dispensing Rear-LoadThe Bill to Bill Mini features the same high-quality components as the Bill to Billchanger, but takes up a smaller footprint.The bill dispenser is offered with a dual cassette to give greater versatility. Choose fromHamilton’s XE bill validator or several third party validators. With the Mars validator,accept up to a 100 bill.A Handheld Kit is required for setup.Changes/Pays 1, 5, 10, 20 to billsFeatures: Hamilton XE validator 1,000 bill stacker Cabinet: 11 gauge stainless steel Faceplate: 7 gauge stainless steel Weather shield Two heavy-duty Medeco locks EGL controller (D.A.N. compatible) Dual bill dispenser Power: 120 VAC 60Hz Weight: 50 lbs/22.7 kgB2B MINI DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:24 1/4” H x 15” W x 14” D88.3 cm H x 46.4 cm W x 36.8 cm DFaceplate:28 1/4” H x 18” W97.3 cm H x 54.9 cm WBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMars High Denomination (accepts 1 - 100 bills)CoincoBILL TO BILL MINI ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines, required for setup) [part #100-0136]Customized face panelOut of Service relay kit [part #47-0155A]Spare bill cassettes [part #49-9533]Bill cassette lock [part #63-5061]9

DRS-CCTDual Rear-Load Changer with Credit Card to Token CapabilitiesThe DRS-CCT is a dual rear-load changer that is designed to accept cash and dispensechange or tokens on one side of the machine, as well as accept credit cards and GiftCards to dispense tokens on the other side of the machine.Installation requires a CAT 5 line to each side of the machine for data transmissionthrough the high speed Internet connection.Requires Data Access Network (D.A.N.) for operation, and a Handheld Kit for setup.No change/currency can be dispensed for credit card transactions.Changes/Pays 1, 5, 10, 20 to coins or tokens; credit card to tokensFeatures: Credit card reader (magnetic stripe) Hamilton XE validator (with Tokenote acceptance) 1,000 bill stacker Cabinet: 11 gauge carbon steel Faceplate: 7 gauge stainless steel Heater (with XE validator only) Weather shield Two heavy-duty Medeco plug locks DTV controller for credit card side- maximum capacity 4,800 quarter-sized tokens DCC controller for changer side- maximum capacity 4,800 quarters Power: 120 VAC 60 Hz Weight: 220 lbs/99.8 kgBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoincoDRS-CCT ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines, required for setup) [part #100-0136]Customized face panelToken face panelToken hopper (must indicate size when ordering)Locking hopper cover [part #11-0052A]Out of Service relay kit [part #47-0155A]10DRS-CCT DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:34 3/4” H x 18 1/4” W x 14 7/16” D88.3 cm H x 46.4 cm W x 36.8 cm DFaceplate:38 5/16” H x 21-5/8” W97.3 cm H x 54.9 cm W

RNS -CCTRear-Load Credit Card to Token ChangerThe RNS-CCT is a single rear-load changer designed to only accept credit cards or GiftCards and dispense tokens. Gift Cards work just like a credit card - use them to promotereturn business by offering bonus token payouts for higher dollar purchases.Installation requires a CAT 5 line to the machine for data transmission through the highspeed Internet connection.Requires Data Access Network (D.A.N.) for operation, and a Handheld Kit for setup.No change/currency can be dispensed for credit card transactions.Changes/PaysCredit card to tokensFeatures: Credit card reader (magnetic stripe) Cabinet: 11 gauge carbon steel Faceplate: 7 gauge stainless steel Two heavy-duty Medeco plug locks DTV controller Maximum capacity: 4,800 quarter-sized tokens Power: 120 VAC 60 Hz Weight: 125 lbs/56.7RNS-CCT DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:34 1/2” H x 9” W x 13” D89.6 cm H x 22.9 cm W x 33 cm DFaceplate:38 1/2” H x 12” W97.8 cm H x 30.5 cm WRNS-CCT ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines, required for setup) [part #100-0136]Customized face panelLocking hopper cover [part #11-0052A]Out of Service relay kit [part #47-0155A]11

CCD (CARD & CHANGE DISPENSER)Rear-Load Gift Card Dispenser and Coin ChangerThe Card and Change Dispenser (CCD) offers both a Gift Card Dispenser and change machinein one convenient unit.Ingenico iUC285 EMV (USA)Customers can purchase new Gift Cards (with a choice of dollar amount values), checkbalances on existing cards, and add additional value through a simple instructional display.They can also print receipts at the CCD for transactions made in self serve bays.Requires Data Access Network (D.A.N.) for operation,and a Handheld Kit for setup. No change/currencycan be dispensed for credit card transactions.Mag StripeChanges/Pays 1, 5, 10, 20 to coins or tokensFeatures: Hamilton XE validator (with Tokenote acceptance) 1,000 bill stacker Cabinet: 11 gauge stainless steel Faceplate: 7 gauge painted stainless steel Weather shield Two heavy-duty Medeco plug locks EGL controller Backlit display Maximum capacity:4,800 quarters200 gift cards Power: 120 VAC 60Hz Approximate weight: 230 lbs/117.9 kgCCD DIMENSIONS (U.S. & metric)Cabinet & minimum wall opening:34 ¾” H x 18 1/4:” W x 20 5/16” D 88.3 cm H x 46.4 cm W x 52.4 cm DFaceplate:38 ¼” H x 21 5/8” W 97.2 cm H x 54.9 cm WBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoincoCREDIT CARD OPTIONSMag Stripe - included in base configurationIngenico iUC285 all-in-one card reader (supports mag stripe, EMV/chip, and NFC) [USA market]Verifone UX Solution (pinpad, EMV/chip reader, NFC reader) [Canadian market]CCD ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines, required for setup) [part #100-0136]Customized face wrapCabinet heater [part #47-3177]Locking hopper cover [part #11-0052A]12Verifone UX (Canada)

1200FL-CHeavy Duty, Front-LoadThe 1200FL-C features an 11-gauge carbon steel cabinet with a single validator anda single high capacity hopper that holds 4,800 quarters ( 1,200). The 1200FL-C isrecommended for indoor use (see 1200FL-S below for outdoor option).When used with the Data Access Network (D.A.N.), you have the ability to remote intothe changer and clear certain error codes and view audits.Changes/Pays 1, 5, 10, 20 to coins or tokensFeatures: Hamilton XE validator (with Tokenote acceptance) 1,000 bill stacker Cabinet: 11 gauge stainless carbon steel Weather shield Two heavy-duty Medeco plug locks C-2000 Controller Maximum capacity: 4,800 quarters Power: 120 VAC 60 Hz Weight: 1200FL-S 130 lbs./59 kg 1200FL-C 160 lbs./72.7 kg ETL listed1200FL-C DIMENSIONS (U.S. & metric)Cabinet:26” H x 19 1/8” W x 13” D66 cm H x 48.6 cm W x 33cm D1200FL-SThe 1200FL-S includes the same features as the FL-C, but has an 11 gauge stainless steel cabinet and issuitable for both indoor and outdoor use. Includes heater pad when paired with XE validator.BILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoinco1200FL ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines) [part #100-0136]IDX coin acceptor/mechanismCustomized face panelToken face panelToken hopper (must indicate size when ordering)Locking hopper cover [part #11-0052A]Locking stacker cover [part #36-0052A]Out of Service Relay Kit [part #47-0155A]Audit Pro 2000 controller (Handheld Kit required for programming)Portable thermal report printer (works with Audit Pro 2000 controller) [part #100-0203]Medium console base [part #61-0029A]D.A.N.-ready controllerThe 1200FL-C is a direct replacement to the discontinued H-1 change machine.The 1200FL-S is a direct replacement to the discontinued SS-1 change machine.13

3600FLHeavy Duty, Front-LoadThe 3600FL changer offers the most versatility of any front-load changer. It comes withone validator and can be configured with one, two, or three high capacity hoppers. Amulti-coin acceptor may be added to fit the needs of your business.When used with the Data Access Network (D.A.N.), you have the ability to remote intothe changer and clear certain error codes, as well as view audits.A Handheld Kit is required for setup.Changes/Pays 1, 5, 10, 20 to coins or tokensFeatures: Hamilton XE validator (with Tokenote acceptance) 1,000 bill stacker Cabinet: 11 gauge carbon steel Weather shield Two heavy-duty Medeco plug locks C-2000 Controller Maximum capacity: 1 hopper - 4,800 quarters; 2 hopper - 9,600 quarters;3 hopper - 14,400 quarters Power: 120 VAC 60 Hz Weight: 300 lbs/136.1kg ETL listed14,400 QUARTER CAPACITY1 validator / 3 hoppers9,600 QUARTER CAPACITY1 validator / 2 hoppers4,800 QUARTER CAPACITY1 validator / 1 hopperBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoinco3600FL ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines, required for setup) [part #100-0136]IDX coin acceptor/mechanismCustomized face panelToken face panelToken hopper (must indicate token size when ordering)Locking hopper cover [part #11-0052A]Locking stacker cover [part #36-0052A]Out of Service relay kit [part #47-0155A]Audit Pro 2000 controller (Handheld Kit required for programming)Portable thermal report printer [part #100-0203]Large console base for 3600FL (front load) [part #61-0578A]D.A.N.-ready controllerThe 3600FL is a direct replacement to the discontinued HS-2/HS-3 change machines.143600FL DIMENSIONS (U.S. & metric)Cabinet:41 7/8” H x 20” W x 12 7/8” D105 cm H x 50.8 cm W x 32.7cm D

2000V / 2600VRecommended only for indoor attended locationsHigh Capacity, EconomyThe 2000V features a single validator with a high-capacity hopper that holds 8,000quarters ( 2,000). A coin acceptor is optional.The 2600V features a second hopper that holds an additional 2,400 quarters ( 600).Changes/Pays 1, 5, 10, 20 to coins or tokensFeatures Coinco validator 1,000 bill stacker Cabinet: 12 gauge carbon steel Four-point high security locking mechanism with Medeco plug locks C-2000 controller Maximum capacity: 2000V - capacity 8,000 quarters;2600V - capacity 10,400 quarters Weight: 135 lbs/76.7 kg ETL listedDIMENSIONS (U.S. & metric)Cabinet:34” H x 18” W x 13 ¼” D86.4 cm H x 45.7 cm W x 33.7 cm DBILL ACCEPTOR/VALIDATOR OPTIONSCoinco - included in base configurationXEMars2000V / 2600V ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines) [part #100-0136]IDX coin acceptor/mechanismChange face wrap (red, black, blue, or green color options)Token face wrap (red, black, blue, or green color options)Customized face wrapLocking stacker cover [part #36-0052A]Out of Service Relay Kit [part #47-0155A]Audit Pro 2000 controller (Handheld Kit required for programming)Portable thermal report printer (works with Audit Pro 2000 controller only) [part #100-0203]Floor mount complete base kit (includes base, footer, and header) [part #100-0107]Floor mount header/base only kit [part #100-0105]Floor mount footer only [part #100-0108]Floor mount base only [#100-0104]Header only [part #100-0103]15

E-385 / E-770Recommended only for indoor attended locationsLow Capacity, Front-Load Economy ChangersThe E-385 and E-770 Economy Changers are designed to provide reliability at a lowercost without sacrificing quality.The E-385 features a single validator with a single hopper that holds 1,540 quarters( 385).The E-770 features a second hopper that brings the capacity to 3,080 quarters ( 770).Changes/PaysE-385 - 1, 5, 10, 20 to coins or tokensE-770 - 1, 5, 10, 20 to coins or tokensFeatures Coinco validator Cabinet: 14 gauge carbon steel Three-point high security locking system with Medeco plug locks E770 controller Maximum capacity: E-385 - 1,540 quarters; E-770 - 3,080 quarters Power:120 VAC 60 Hz Weight:E-385 – 68 lbs/30.8 kgE-770 – 75 lbs/34.0 kgE-3851,540 quarter capacityE-7703,080 quarter capacityE-385 / E-770 ACCESSORIES & OPTIONSToken face wrapCustomized face wrapToken hopper (must indicate token size when ordering)Header and base kit [part #61-0611A]Red painted cabinet16DIMENSIONS (U.S. & metric)Cabinet:22 3/8” H x 12” W x 15 1/4” D57.4cm H x 30.5cm W x 38.7cm D

VN-1Recommended only for indoor attended locationsMedium Capacity, Front-LoadThe VN-1 Changer features a single validator with a single high capacity hopperthat holds 4,800 quarters ( 1,200). It is designed for vending areas and may bepurchased with a optional header and base kit for mounting.Changes/Pays 1, 5, 10, 20 to coins or tokensFeatures Hamilton XE validator (with Tokenote acceptance) 1,000 bill stacker Cabinet: 12 gauge carbon steel Three-point high security locking system with Medeco plug locks C-2000 controller Maximum capacity: 4,800 quarters Power: 120 VAC 60 Hz Weight: 115lbs/52 kgVN-1 DIMENSIONS (U.S. & metric)Cabinet:36 3/8” H, 9 15/16” W, 13 1/4” D92.4 cm H x 25.4 cm W x 33.6 cm DBILL ACCEPTOR/VALIDATOR OPTIONSXE - included in base configurationMarsCoincoVN-1 ACCESSORIES & OPTIONSHandheld Kit (interchangeable between machines) [part #100-0136]Token face wrapCustomized face wrapToken hopper (must indicate token size when ordering)Locking hopper cover [part #11-0052A]Locking stacker cover [part #36-0052A]Out of Service relay kit [part #47-0155A]Red painted cabinetHeader and base kit [part #61-0576A]Audit Pro 2000 Controller (Handheld Kit required for programming)Portable thermal report printer (works with Audit Pro 2000 Controller only) [part #100-0203]17

DATA ACCESS NETWORK (D.A.N)A Data Access Network (D.A.N.) System acts as a central hub at your car wash location, providing credit card clearing, auditinformation, equipment status, Hosted Solutions integration, and more.Required for DRS-CCT, RNS-CCT and CCDOptional for 3600, Bill to Bill, Bill to Bill Mini, 1200, RNS, DRS, and ER-60FEATURES Windows 8.1 operating system Ties any Hamilton change machine to Hosted Solutions, Hamilton’s cloud-based site management platform Supports high-speed credit card clearing for change machines Email and text notifications: get status and error reports on any change machines connected to the D.A.N. Supports Hamilton Gift Cards- sell value/gift cards and build a loyal customer base- customize with your logo and brand- use as either pre-paid or post-pay card- allows you to reduce credit card fees- same size as a credit card Validated payment application (PCI PA-DSS) Requires customer-supplied keyboard, monitor, and mouseMODELSEcono D.A.N.(computer only, does not include cabinet housing. Not suitable for wet environments) [part #49-9669]Power: 120 VAC, 60Hz Weight: 1.95lbs/0.88kgBasic D.A.N.(includes computer and heavy-duty cabinet housing, suitable for use in wet environments) [part #49-9671]Power: 120 VAC, 60Hz Weight: 40lbs/18.1kg Cabinet construction: 14 gauge stainless steelDimensions: 20” H x 19 7/8” W x 5” D 50.8cm H x 50.5cm W x 12.7cm DACCESSORIESCard reader to activate, recharge, and check balance of Gift Cards (for Econo or Basic versions) [part #49-9442]Transaction receipt printer (allows printing of receipts from D.A.N. computer) [part #100-0118]Cash drawer and transaction receipt printer for D.A.N. [part #100-0205]* D.A.N. systems include Validated Payment Application (PCI PA-DSS) software for high-speed credit card processing, Gift Card acceptance, and remotemanagement. If using mag stripe credit card processing, an account with E-xact Transactions Ltd. (secure gateway provider) is required. For a complete list ofcomponent requirements specific to your location and setup, please contact the Hamilton Sales Department.18

HEADERS & BASESHeader & Base KitsFor 72” in-line banking. Compatible with the VN-1, E385/E-770 and 2000V/2600V change machines.Color options: black or red (red not available for 2000V model changers)Console BasesLarge console base available for the 3600FL series changers.Medium console base available for the1200FL series changers.Color options: grey or blackMedium console baseLarge console baseFooter for 2000V/2600VVN-1 shown withHeader & Base KitACCESSORIES & OPTIONS GLOSSARYValidatorsOur change machines can accept various currencydenominations through a choice of either Hamilton XE withTokenote acceptance, Mars , or Coinco validators.Coin AcceptorsAn IDX coin acceptor is available for the 3600RL, 3600FL,1200FL, and 2000/2600V series changers. Microcoinacceptors are used in all Australian-spec machines.Handheld KitThis provides a convenient way to view audit data andchange payout options. All coin, bill and Tokenote payouttransactions are displayed on the LCD screen (not availablefor the E385/E770).Out-of-Service Relay KitPermits connection of your Hamilton product to a washcomputer or a paging system to notify you of a serviceproblem (not available for all models).Portable Thermal PrinterThis allows you to print hard copy audit reports for any changemachine using the Audit Pro 2000 controller.Customized Face Panel/WrapHamilton can customize your change machine panels orwraps with your logo and color scheme. Further informationis available at hamiltonmfg.com/panels.Token Face Panel/WrapIf your change machine will be dispensing tokens, atoken face panel/wrap is available at no additional cost.Locking Hopper CoverDeters removal of coins from an open hopper (not availablein the E385/E770, ER-60 or 2000V/2600V changers).Locking Stacker CoverHelps prevent removal of currency from the stacker in frontload model changers (for use with XE validator only)Tokenotes For changers with the Hamilton XE validator, Tokenote acceptance is available. Tokenotes are used the same aspaper currency, but reduce the amount of cash handlingwithin your business. Change machine must be configuredto dispense tokens.19

CHANGEMACHINESPRODUCT CATALOGHamilton Mfg Corp.1026 Hamilton Dr.Holland, OH 43528Document #6052P: 419.867.4858P: 888.723.4858F: 419.867.4850hamiltonmfg.com1/20

Cabinet: 11 gauge carbon steel Faceplate: 7 gauge stainless steel 3600RL DIMENSIONS (U.S. & metric)Heater pad (with XE validator only) Weather shields Two heavy-duty Medeco plug locks Audit Pro 2000 controller Maximum capacity: 1 hopper - 4,800 quarte